products in Automotive & Transportation: Initiator

Pergan

PEROXAN PND-50 WN-A

PEROXAN PND-50 WN-A is tert-Butyl peroxyneodecanoate 50%, Emulsion in water and methanol.PEROXAN PND-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Otsuka Chemical

Otsuka Chemical ACVA

Otsuka Chemical ACVA is used for water soluble application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Oxytop

Cetox 20OE

Cetox 20OE is a peroxide initiator for the copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-50 contains a lower amount of active oxygen, shows a longer copolymerization time as well less exothermic effect.

Pergan

PEROXAN LP-40 W

PEROXAN LP-40 W is Dilauroyl peroxide 40%, Suspension in water.PEROXAN LP-40 W is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Oxytop

Cetox 12OB RED

Cetox 12OB RED is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-20OE contains a lower amount of active oxygen, shows a longer copolymerization time, and also less exothermic effect.

Oxytop

Cetox 35OE

Cetox 35OE is a peroxide initiator for the copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

Pergan

PEROXAN C126

PEROXAN C126 is Dimyristyl peroxydicarbonate Flakes.PEROXAN C126 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Pergan

PEROXAN NPO-50 WN-A

PEROXAN NPO-50 WN-A is Di-(3,5,5-trimethylhexanoyl)-peroxide 50%, Emulsion in water and methanol.PEROXAN NPO-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Pergan

PEROXAN CU-80 L

PEROXAN CU-80 L is Cumyl hydroperoxide 80%, Solution in cumene.PEROXAN CU-80 L is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber) as well as for the emulsion polymerization of (meth-)acrylates and acrylic resins dispersions.PEROXAN CU-80 L is used for the curing of unsaturated polyester resins and vinylester resins.

Pergan

PEROXAN C124

PEROXAN C124 is Dicetyl peroxydicarbonate 95%, Flakes.PEROXAN C124 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Oxytop

Metox 50S

Metox 50S is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. In relation to the hardener Metox-50 shows a shorter gelation time.

Oxytop

Metox BW90

Metox BW90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

Bann Quimica

Banac NS

Banac NS has chemical composition of N-tertbutyl 2-benzothiazole sulfenamide and used as an accelerator.

Pergan

PEROXAN DI-30

PEROXAN DI-30 is Diisobutyryl peroxide 30%, Solution in odorless white spirits.PEROXAN DI-30 is used for the polymerization of vinylchloride.

Bann Quimica

Banac TMTM

Banac TMTM has chemical composition of Tetramethyl thiuram monosulfide and used as an accelerator.

Pergan

PERGAPROP BIB-10 PP-EG

PERGAPROP BIB-10 PP-EG is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 10%, Granules with Polypropylen.PERGAPROP BIB-10 PP-EG is used for the production of controlled rheology polypropylene (CR-PP).

Oxytop

Cetox 30OE

Cetox 30OE is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

Pergan

PEROXAN BU

PEROXAN BU is tert-Butylcumylperoxide 94%, Liquid.PEROXAN BU may be used for the (co)polymerization of styrene, acrylates and methacrylates.PEROXAN BU is used for the curing of unsaturated polyester resins.PEROXAN BU is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Pergan

PEROXAN PAM

PEROXAN PAM is p-Menthan hydroperoxide 50%, Solution.PEROXAN PAM is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber).

Otsuka Chemical

Otsuka Chemical AMBN

Otsuka Chemical AMBN is used at medium temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

Pergan

PEROXAN DDP

PEROXAN DDP is Didecanoyl peroxide 98%, Flakes.PEROXAN DDP is used for the (co)polymerization of ethylene, vinylchloride, vinylidenchloride, acrylates and methacrylates.