products in Automotive & Transportation: Resin

BSB Recycling

Seculene® PPU 8027 S0

Seculene® PPU 8027 S0 can be specifically tailored to the unique needs of our customers. Seculene® PP is used in a wide variety of sectors with extensive polymer requirements, such as the automotive segment. ECOBAT works with a wide range of industry brands from planning and development through to unit production.

Advanced Laser Materials (ALM)

Advanced Laser Materials (ALM) PA 605 A

Advanced Laser Materials (ALM) PA 605 A is a 50% Aluminum filled nylon 12 that can produce accurate parts with excellent part strength and surface detail. Drop in replacement for other commercially available 50% aluminum filled materials with an increase in recyclability. Improved heat transfer, good dimensional stability and pleasant gray metallic part appearance. Easy to post process; good machinability and can be sanded.

I.T.I. Poland

Itiplen Ih M10 C10

Itiplen Ih M10 C10 is a homopolymer copolymer with calcium carbonate filler. It is also used in injection molding.

EnCom Polymers

DualPoly™ 1008

Godiplast

Godiplast PEEK(G) 8200G

Godiplast PEEK(G) 8200G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Ceramer GmbH

Ceramer 60 LF

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Polymer Compounders

ABSCOM® S105

ABSCOM S105 is an easy flowing injection molding general purpose ABS grade with exceptional color performance. Typical applications include white goods, automotive, electronics and point of sale devices. WRAS approved in specific colors.

Macomass

Macomass MM-PP HE22

MM-PP HE22 is PP 40% mineral filled by Extrusion Processing

EnCom Polymers

EnCounter™ 130GF

Polyplastics Group

Armamid™ PA GF 25 -1FR

PolyMirae

Adstif HA748L

Adstif HA748L is a high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high gloss and maintaining mechanical properties even at high temperatures. Adstif HA748L is selected by customers for use in the production of stiff injection molded articles where high rigidity is needed. Typical applications of Adstif HA748L include food packaging containers, housewares, small appliances and technical parts. It is typically used by customers in small appliances and automotive compounding applications where high rigidity and very good thermal characteristics are required. Adstif HA748L is used in food contact.

Sciengy New Materials

Sciengy New Materials PPS-SGM505E43

PPS-SGM505E43 PPS is a 50% glass fiber and mineral reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties.

Toray

Toraycon® 1154W

Toray Toraycon® 1154W is a Polybutylene Terephthalate (PBT) product filled with 33% glass bead\glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated, flame retardant and warp resistant.

Nilit

Nilamid® A3 HH K40

Nilit NILAMID® A3 HH K40 is a Polyamide 66 (Nylon 66) compound, 40% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 HH K40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

IFG

IFG PE

IFG PE are developed specifically as bonding fibers for carpets and to be processed into fleeces for Geotextiles (landfill). It is a more environmentally friendly alternative to latex in carpet applications. Depending on construction and specific product requirements, the blending ratio (approx. 20%) of PE fibers with for example PP fibers can vary. A thermal treatment of approximately 125°C is required to create a bonding effect.

Saint-Gobain

Rulon® 142

Aqua colored low deformation material suitable for linear bearings and slides Rulon® 142 is a specially formulated dull blue-green linear bearing material that exhibits low wear, high thermal dissipation, and good dimensional stability characteristics.Among its many benefits are the virtual elimination of stick-slip, vibration dampening, self-lubrication, uniform friction, long life, ease of application and design diversity.Rulon 142 has excellent mechanical properties and is the ideal material for machine tool applications. Its low deformation characteristics limit the amount of misalignment that can occur with other bearing materials.Strong acids and bases should be avoided, as they may attack the fillers.

K. Kanellakis

K. KANELLAKIS R-HDPE 0203

K. KANELLAKIS R-HDPE 0203 is available in pellet form and is used for extrusion applications.

LOTTE Advanced Materials

INFINO WP-1071

BCC Products

BCC Resins™ BC 5003

BC 5003 is a medium viscosity, unfilled laminating system. It is a room temperature curing resin with a relatively short pot life. BC 5003 is also considered an excellent general purpose adhesive for in-shop use. Recommended for use in gluing up BCC's Tooling Board Series.

Zell-Metall Engineering Plastics

ZELLAMID® 202

ZELLAMID® 202 is a tough polyamide 6 material with high resistance to abrasion and impact.

Kopla

Kopla KNG1025F

PA6 glass fiber 25% reinforced V-0

Sylvin Technologies

Sylvin™ 9917-89 Natural

Sylvin™ 9917-89 Natural is a vinyl compound formulated for molding or extrusion applications that require low plasticizer migration and good chemical resistance.

Kadakia Plastics and Chemicals

KPC® KLC-35G

KPC® KLC-35G by Kadakia Plastics and Chemicals is a general purpose, flexible polyvinyl chloride (PVC) grade. Is suitable for processing by profile extrusion. Possible applications could be AV, AVS, AVSS wiring harness, sleeves, door trims, fuel tubes, horn pads, knobs, weatherstrips, roof garnish, quarter glass profiles and profile end molding in automotive industry. KPC® KLC-35G complies with IS, JIS, JASO, SAEJ and Underwriters Laboratory (UL).

BCC Products

BCC Resins™ MB1150

MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.

Gujarat Petrosynthese

Synofin (Modified PPCP) LA4601/470 - 1 General (Colou red)

Gujarat Petrosynthese is modifying and supplying of PP Polymers with a high grade of raw material using the latest technology as per customer specification. Synofin (Modified PPCP) LA4601/470 - 1 General (Colou red) polymers are modified with Flame Retardant, UV, Glass Fiber, Talc, etc.

geba Kunststoffcompounds GmbH

PC-ABS Gecomblend 3000 FR HT

PC-ABS Gecomblend 3000 FR HT is a flame-retardant PC / ABS type with very good temperature resistance, fire protection class V-0 (1.5mm).

Romira

LURANYL® HT 220 G2

LURANYL® HT 220 G2 is a PPE/PA, injection molding grade, 10% glass fiber reinforced, high heat resistance.

Hapco Inc.

Di-Pak™ E-4665-3

DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.

Taro Plast

Haiplen™ EP100 MF6

Fudow Company

Fudow Company F5650F

Fudow Company F5650Fis a glass fiber.

GEMA POLIMER

Gemapilen® GF20 CP

Gemapilen® GF20 CP is 20% glass fiber reinforced PP Co-polymer and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

Grupa Azoty S.A

Tarflen® SM2

Grupa Azoty S.A Tarflen® SM2 is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compression molding.Important attributes of Tarflen® SM2 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

CP-Polymer Technik

Wellamid® GF14-60 XE-N

CP-Polymer Technik Wellamid® GF14-60 XE-N is a Polyamide 6 (Nylon 6) material filled with 14% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Typical application of Wellamid® GF14-60 XE-N: Automotive

Polimersan Plastics

Polimersan Plastics POLIPOM (POM)

Polimersan Plastics Polipom (POM) is one of the most preferred Polymer due to resistance to bending and wearing,.

CP-Polymer Technik

Wellamid® 6600 GV 40 HWCP

CP-Polymer Technik Wellamid® 6600 GV 40 HWCP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

KW Plastics

KW Plastics KW627C

KW Plastics KW627C is a Copolymer Impact Polypropylene, Post-Consumer Resin Compounded with 7% Calcium Carbonate.