Products in Aerospace Fluids & Lubricants

UNINAP® 2200 AV is a naphthenic process oil.

RB Products manufactures and supplies an extensive line of additive componentry products, which provide performance enhancements when added to a chosen base oil mixture. As part of our additive componentry offerings, we provide Alkyl Phenol 90%. Alkylphenol (90% para) is derived from propylene tetramer and phenol. RB Alkylphenol 90% is particularly suited for applications where high para isomer content is desired such as an oxidation inhibitor and as an intermediate for the preparation of lubricating oil additives, inhibitors, etc.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Liquid-O-Ring® PM600MN1 is a heavy-duty, all-purpose lubricant made with moly. It is tacky and has very high shockabsorbing abilities. PM600M is manufactured with exceptional adhesive and cohesive properties, allowing longer service intervals. PM600M forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is non-melting, water resistant, and protects against corrosion as it lubricates. PM600M is available in NLGI grades 1, 2, and 3.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Ergon’s HyGold base oils are genuine naphthenic and paraffinic oils produced to exact specifications and designed for a variety of lubricating applications. HyGold products have low pour points, good solvency power, low odor levels, excellent color and color stability characteristics.

ElectroCool® Dielectric Coolants - EC-110 is a single-phase liquid immersion coolant and the highest performance biodegradable, non-toxic liquid dielectric heat transfer fluids available for use with full immersive cooling of electronic devices. ElectroCool® Dielectric Coolants - EC-110 feature the broadest material compatibility index, highest dielectric strength, zero environmental impact, and the best health and safety ratings.

This severely hydrotreated paraffinic base oil provides excellent color and consistency.

Marzon X-55 utilizes Laurel's proprietary thermal particle polishing processing technique. This results in a remarkably uniform particle with uniquely high powder bulk density. As a result, the flow and handling characteristics of Marzon X-55 surpass those of other standard PTFE micropowders. Because of its high particle density, in many cases greater efficacy can be achieved at lower mass loadings when compared to standard additives

AmpCool® Dielectric Coolants - AC-220 is a dielectric cooling lubricating fluid designed specifically for cooling and lubrication of electric motors, automotive kinetic energy recovery, systems, generators, and hydraulic power transfer systems in marine, vehicular, aerospace, and robotics applications. AmpCool® Dielectric Coolants - AC-220 feature the highest lubricity and best in class oxidation stability coupled with the broadest material compatibility index, highest dielectric strength and best health and safety ratings available.

Poly-Globe 247 is a soluble fine emulsion oil, biostable, designed for a wide range of machining operations. It is based on mineral oil, intended for machining by swarf removal or abrasion operations.

Performance FG2 Grease is based on synthetic hydrocarbons and with the addition of PTFE provides exceptional performance in terms of high load carrying and operating temperature. The product is designed to enable rationalization of greases and is suitable for incidental contact in food processing plants and food packaging plants.

At RB Products, we supply an extensive line of additive componentry, designed to enhance end-product specifications. When incorporated into a chosen base oil mixture, additives can provide the following performance enhancements: Anti-Corrosion; Anti-Wear; Extreme Pressure; Lubricity; Anti-Oxidation; Viscosity Improvement ; Increased Solubility As part of our Additive Componentry line, we offer Branched Alkyl Benzene (RB BAB), an Alkylate manufactured from a branched alkylbenzene.

This severely hydrotreated paraffinic base oil provides excellent color stability and consistency. It passes the IP 346 labeling requirement.

UNINAP® 100 JS is a naphthenic process oil.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Sentinel CanadaSL-10924 is an advanced lithium-complex, multi-purpose grease. It is an NLGI Grade 2 grease. This unique product is composed of synthetic and natural base fluids. The exceptional additive package contains anti-oxidants and corrosion inhibitors. The benefits of this grease include water resistance.

BNX 1135 (125643-61-0)is a liquid hindered phenolic antioxidant that is highly effective for the thermal stabilization of plastics (especially polyols and polyurethanes) and lubricants (especially engine oils and industrial lubricants).

aramcoULTRA 6 is used in engine oil, gear oil and axle oil.

Adhesive polymers and surfactants in water . P-80® Grip-It Quick-Drying Temporary Assembly Lubricant eases installation of tight-fitting rubber and plastic parts by reducing the force needed for assembly. Once assembly is complete, P-80® Grip-It dries and provides resistance that helps keep parts in place.

National Process Industries Vitro-Lube NPI-1220 lubricant is the most unique and widely used lubricant among our products. Vitro-Lube is technology that was generated by the XB-70 group at the Los Angeles Division of North American Aviation, Inc. (now The Boeing Company). It was the result of a crash program initiated after exhaustive screening and evaluation which revealed that the dry film lubricant industry had not advanced the state-of-the-art to a point that would come close to meeting the requirements of the XB-70 Mach 3 aircraft. NPI negotiated an exclusive license with NAA in 1965 and proceeded to further evaluate the process as it would relate to other vehicles and systems, Now, over 50 years later, we feel safe in claiming that Vitro-Lube is that very special dry film commercially available for use at temperatures up to +700°F while at the same time offering outstanding performance at room temperature and cryogenic temperatures. It has been extensively evaluated over a wide range of temperatures and load levels including fretting/vibration conditions, and based on all available comparative test data, is still unsurpassed in terms of high load wear life over its designed temperature range.

Synthetic esters emulsified in water. P-80® RediLube Temporary Rubber Lubricant is a biodegradable assembly aid that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for insertion. P-80® RediLube dries quickly and completely.

PL163 Clear Polyimide Coating is a highly resistant polyamide stoving enamel with good heat, corrosion and aircraft fluid resistance. It is suitable for operating temperatures of up to 570⁰F.

UNIPAR® 120 KS is a paraffinic process oil.

CIMTECH® 320Z with InSol Technology is a metal working fluid that is non-oil based and has a pH close to neutral. Designed specifically for the aerospace industry. Recommended for medium to heavy/severe duty machining and grinding operations, such as creep feed grinding on non-ferrous or ferrous metals.

PerFluoroLube® 17/2 Grease is manufactured exclusively with Fomblin Base Fluid. The PerFluoroLube® range of greases are based on perfluoropolyether (PFPE) fluids thickened with inorganic thickeners. They are well suited to long life and/or high temperature applications and are also suitable for aggressive chemical and food environments.The greases will not thicken or carbonize with time and enable “filled for life applications”.

UNINAP® 108 AC is a naphthenic process oil.

This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

UNIPAR® 60 TOM is a paraffinic process oil.

RB Products manufactures and supplies an extensive line of additive componentry, designed to enhance end-product specifications. As part of our additive componentry line, we offer Zinc Dithiophosphate 7. RB ZD 7 is a zinc dialkyldithiophosphate lubricating oil additive. It is generally used with detergent‐dispersant and acid neutralizing additives in engine oils. This additive provides oxidation, copper‐lead bearing corrosion and wear control in diesel and gasoline engines. It is particularly effective under the severe temperature and load conditions encountered in highly supercharged diesel engines.

RB PAO 150 cSt is a polyalphaolefin, synthetic oil. Used in extreme service gear oils, high viscosity compressor oils and hydraulic fluid, synthetic greases, heavy engine oils.

Fusion Cool 2395-LC is a premium, high performance, emulsifiable metalworking fluid for heavy-duty machining and grinding of all metals including automotive and aerospace aluminum alloys. Fusion Cool 2395 is formulated with a unique additive package, which enhances the machinability of the product while also offering exceptional biological control.

aramcoULTRA 4 is used in engine oil, automatic transmission fluid and white oil.

CIMTECH® 50-­F321 with InSol™ Technology metalworking fluid is a unique, low pH synthetic fluid designed for the aerospace industry and is recommended for heavy to severe duty machining and grinding operations, including creep feed grinding, on non-ferrous or ferrous metals. Suitable for use where extreme lubricity is required, such as deep hole drilling and roll form tapping.

Liquid-O-Ring® PM600N00 is a heavy-duty, all-purpose lubricant manufactured specifically for bearings and open gears. PM600 is tacky and has very high shock-absorbing abilities with a high melting point of +500°F (260°C). PM600 is a grease manufactured with exceptional adhesive and cohesive properties, allowing longer service intervals. PM600 forms a lubricating film that prevents metal-to-metal contact and reduces operating temperatures. It is water-resistant and protects against corrosion as it lubricates.