Automotive Fluids & Lubricants
1,185 products found for Automotive Fluids & Lubricants in Lubricants & Functional Fluids
MOLYKOTE® 165 LT Grease
MOLYKOTE® 165 LT Gearwheel Grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.
MOLYKOTE® 7 Release Compound
MOLYKOTE® 7 Release compound is a Dimethyl silicone compound for a variety of lubrication and protection applications. It can be used in applications including mold release agent for foundry shell and core molds. Break-in treatment for bladders on tire presses, rubber lubricant and preservative. Release agent for adhesives and glues. Cable pulling lubricant to draw rubber-covered cable through conduit. Release agent for plastic extruders and processing equipment and release agent for plastic film packaging machines.
MOLYKOTE® 111 Compound
MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.
MOLYKOTE® SH 44 MT Grease
MOLYKOTE® SH 44 MT Grease is high-temperature silicone grease for bearings.
MOLYKOTE® G-1023 Grease
MOLYKOTE® G-1023 is PAO grease for plastic/metal parts lubrication. It is used in Slides for automotive parts
MOLYKOTE® D-321 R Anti-Friction Coating
MOLYKOTE® D-321 R Anti-Friction Coating is an air-curing dry lubricant.
MOLYKOTE® AS-880N Grease
MOLYKOTE® AS-880N is Grease Silicone oil/silica-thickened light-consistency grease containing specially formulated solid lubricants. MOLYKOTE® AS-880N Grease is designed to lubricate between metal/metal and metal/plastic components in disc brake systems. It is commonly applied between the brake pad and brake shim(s) to reduce and prevent squeal noise that occurs during braking.
MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease
MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease is a specialty lubricant that combines the benefits of wide operating temperature and broad compatibility with varied materials.
MOLYKOTE® Polygliss-N Adhesive Transparent Lubricant
MOLYKOTE® Polygliss-N Adhesive Lubricant is a adhesive lubricant for metal/metal combinations involving slow to medium-fast movements and light to medium loads. Suitable for all types of chains, rails, open gears, joints, hinges, etc., particularly when exposed to weather or moisture.
MOLYKOTE® G-407 Anti-Fretting Grease
MOLYKOTE® G-407 Anti-Fretting Grease is a polyalkylene glycol (PAG)-based grease designed to be used as a lubricant and corrosion protectant for metal-to-metal applications (e.g., guide pins) in automotive brake calipers. The grease has an operating temperature range of -40 to 150°C (-40 to 302°F).
MOLYKOTE® C-40 High Temperature Chain Lubricant
Molykote® C-40 High Temperature Chain Lubricant is a low viscosity fluid dispersion of graphite in synthetic oil. It penetrates inaccessible areas, carrying solid lubricating graphite particles to the point where lubrication films are required. It is designed to lubricate in light to moderate loads at temperatures up to 1000°F.
MOLYKOTE® 6173 Grease
MOLYKOTE® 6173 Grease PAO grease for plastic/metal parts lubrication with good low-temperature capability. Lubrication of automobile parts and electronic and precision equipment, which require low torque transfer due to the grease in low-temperature applications.
MOLYKOTE® G-4500 FM Multi-Purpose Synthetic Grease
MOLYKOTE® G-4500 FM Multi-Purpose Synthetic Grease is a specialty lubricant that combines the benefits of wide operating temperature and broad compatibility with varied materials.
MOLYKOTE® BR-2 Plus High Performance Grease
MOLYKOTE® BR-2 Plus High Performance Grease with solid lubricants for metal/metal combinations involving slow to fast movements, particularly with medium to high loads. MOLYKOTE® BR-2 Plus High Performance Grease is a lithiumsoap-thickened, mineral oil grease fortified with MoS2 and other solid lubricants. It is a heavy duty, extreme pressure lubricant with high load-carrying capability at moderate to high speeds.
This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.
MOLYKOTE® 5 Compound
MOLYKOTE® 5 Compound is a grease like material containing an inert amorphous silica filler in combination with selected dimethyl and phenylmethyl silicone fluids. This nonconductive compound is used primarily for applications requiring compatibility with rubber, metal, and plastic.
MOLYKOTE® D-3484 Anti-Friction Coating
MOLYKOTE® D 3484 Anti-Friction Coating Heat-hardening anti-friction coating. It is Used successfully for pawls of safety cutouts, carburetor springs, lorry coupling sleeves, toothed gears, and parts of car safety belts and car-boot lock parts. Bolts and levers in tractors and construction machines.
MOLYKOTE® L-13 Thinner
MOLYKOTE® L-13 Thinner is a solvent-based thinner. Used for Diluting and cleaning solvent for specific solvent-based MOLYKOTE® Anti-Friction Coatings.
MOLYKOTE® G-3407 Caliper Pin Grease
MOLYKOTE® G-3407 Caliper Pin Grease is a Synthetic grease for caliper guide pin lubrication. Used in Automotive brake caliper mounting pin lubrication, Lubricant for metal/metal pairings.
MOLYKOTE® G-1074 Grease
MOLYKOTE® G-1074 Grease is a PAO-based grease for lubricating common metal, plastic and elastomeric substrates. It offers excellent noise-damping properties, even under extreme pressure at high frequency.
MOLYKOTE® Longterm 2/78 G
MOLYKOTE® Longterm 2/78G Grease is a mineral oil, lithium/zinc soap grease containing specially formulated solid lubricants plus oxidation and corrosion inhibitors.
NA-SUL® CA-1259 is a high performance liquid rust and corrosion inhibitor for rust preventives and dewatering fluids. It offers excellent solubility in a wide range of mineral oils, esters and vegetable oils. NA-SUL® CA-1259 is less viscous than many other additives of its type and may often be able to be cold blended into oils. This results in lower energy cost and faster processing. NA-SUL® CA-1259 has an exceptional ability to help to separate water from oil and oil/solvent solutions making it very suitable for dewatering fluid applications. The solubility of NA-SUL® CA-1259 should be verified in the diluents that are being considered for use.
NA-SUL® CA-50 is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of oil-soluble calcium carbonate.
This severely hydrotreated paraffinic base oil provides excellent color stability and consistency. It passes the IP 346 labeling requirement.
UNIPAR® 580 CC
UNIPAR® 580 CC is a paraffinic process oil.
MARLOWET M 100 VG
MARLOWET M 100 VG is a fatty alcohol poly-glycol ether, based on LIALCHEM 25/75 and propylene oxide.
MOLYKOTE® SH 44 MA Grease
Molykote® SH 44 MA Grease is a silicone grease enhanced lubricity by molybdenum disulfide.
MOLYKOTE® 3400A AERO Anti-Friction Coating
MOLYKOTE® 3400A AERO Anti-Friction Coating is heat-curing dry-film lubricant for metal/metal material pairings involving slow to medium-fast movements and medium to heavy loads. Suitable for permanent lubrication, with simultaneous corrosion protection of friction contacts involving high loads and low speed. Used wherever oils or greases cannot be used for technical reasons or are undesirable because of the risk of soiling.
MOLYKOTE® G-5025 Grease
MOLYKOTE® G-5025 Grease is designed for lubrication of overrunning clutches in starter motors. Its high performance at a wide temperature range makes MOLYKOTE® G-5025 Grease suitable for starter motors with increasing durability requirements of the automotive industry.
MOLYKOTE® PG-65 Plastislip Grease
MOLYKOTE® PG 65 Plastislip is a synthetic hydrocarbon oil/lithium soap grease containing specially formulated solid lubricants. It has excellent compatibility with plastics such as PET, HDPE, PTFE, nylon, and PBT and rubbers such as NBR,PIB, polyurethane, and neoprene. It has a low coefficient of friction and offers good lubricity at high operating speeds.
NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.
This severely hydrotreated naphthenic process oil provides good solvency for the rubber and chemical processing industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light
Sasol Butyl Triglycol Ether (BTGE)
Butyl triglycol ether of 70% mass purity. Butyl triglycol ether (BTG) has high dissolving power for cellulose nitrate, many synthetic, natural resins and dyestuffs. BTG is used typically in cutting and hydraulic oils, particularly in brake fluids, mining, oil field chemicals and textile dyes. For documents specific to a region, please contact Sasol using the 'Request Document' button.
MOLYKOTE® D-708 Anti-Friction Coating
MOLYKOTE® D-708 Anti-Friction Coating is Recommended for the lubrication/corrosion protection of metal/metal and metal/plastic pairings under low to medium loads. Applied coating is a solid film lubricant designed to provide lubrication properties and corrosion protection plus a high quality surface finish. Automotive applications for this material include safety belt components, transmission parts, door locks, etc.
MOLYKOTE® 3402-C LF Anti-Friction Coating
MOLYKOTE® 3402-C LF Anti-Friction Coating is a air dry or heat cure coating for high loads and with low electrical conductivity properties.
MOLYKOTE® SK-623 Grease
MOLYKOTE® SK-623 Grease is a PAO grease with white solid lubricants. Used in Lubrication for plastic/metal parts. Noise reduction of plastic parts.