Automotive & Transportation
26,610 products found in Automotive & Transportation
DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.
Delrin® 150 NC010
Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.
ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-dodecyclhexandecanol and is also referred to as C28 Guerbet alcohol.
Delrin® 500P NC010
Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, a good combination of mechanical properties, and low VOC emissions.
Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.
Zytel® 101L NC010
Zytel® 101L NC010 is a lubricated polyamide 66 resin for injection molding.
Kalrez® Spectrum™ 6375
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
Delrin® FG500SC NC010
Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin@ FG500P. It is designed for cube-blending with any grade of Delrin@ for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.
Delrin® 100 NC010
Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.
Zytel® 101 NC010
Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.
Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.
DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.
ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-decyl-1-tetradecanol and is also referred to as C24 Guerbet alcohol. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Nipol® IR 2200
Nipol IR is a polyisoprene rubber with high cis-1,4 using Ziegler catalyst. Nipol IR is known for its molecular structure and properties that are nearly identical to natural rubber. Nipol IR features extremely stable quality and is widely used in diverse industrial products, such as tires and belts, as a synthetic rubber alternative in place of natural rubber.UsesAuto tires, bicycles tires, aircraft tires, camelback, conveyor belts, V-belt, packings, seals, footwears, rubber thread, coated fabrics, and other extruded and molded mechanical goods. Nipol IR-2200 can be blended with other rubbers such as NR, SBR and BR, etc., and is applicable to transparent and light color products.
Kalrez® Spectrum™ 7075
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.
Delrin® 100P NC010
Delrin® 100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100P provides a great combination of toughness and strength, improved processing thermal stability and productivity for injection molding, and low VOC emissions.
Advanced Composites ADX-5023
ADX-5023 is a mineral filled thermoplastic olefin compound designed for an excellent balance of stiffness and impact. It is UV-stable, scratch resistant, ductile at cold temperatures, and suitable for mold- in-color interior applications.
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.
BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive
ADDITOL® XL 255 N
Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.
Delrin® 570 NC000
Delrin® 570 is a medium viscosity acetal homopolymer containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature.
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
Zytel® 70G33L NC010
Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.
Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.
Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black
Nipol® BR 1220
Nipol BR affords excellent abrasion resistance, low temperature resistance, and heating characteristics, as well as high rebound resilience. There are two types of Nipol BR-high cis-BR and low cis-BR-with different levels of cis-1,4 content, which can be selected according to the specific application. When combined with other rubbers, such as natural rubber, SBR, and NBR, Nipol BR provides and improves low-temperature performance and other characteristics, the inherent features of Nipol BR, while maintaining each rubber's unique properties. Nipol BR is widely used and has proved satisfactory in a variety of manufacturing processes for such products as tires, footwear, vibration-insulating rubber, and high impact polystyrene.UsesAuto tires, bicycle tires, aircraft tires, tire treads, camelback, conveyor belts, V-belt, packings, seals, footwear, coated fabrics, molded and extruded mechanical goods.
Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.
Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer
Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion
BETAPRIME® 5405 UV
BETAPRIME® 54051JV is a primer containing UV trace with short and long open time. Compatibility with pretreated polyolefins and SMC substrates.
Delrin® 500CL NC010
Delrin® 500CL is a medium viscosity acetal homopolymer containing a chemical lubricant, designed for low wear and friction against metals.
Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.
Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.
ADDITOL® VXL 4950
ADDITOL® VXL 4950 is an adhesion-promoting primer for plastics. It must be applied as pre-treatment primer and cannot be used as additive in paints.
Advanced Composites ADX-5017
ADX-5017 is a mineral filled thermoplastic olefin compound designed for a balance of stiffness and impact. It is high flow, UV-stable*, scratch resistant, and suitable for mold-in-color interior applications.
Mitsubishi Chemical Group
METABLEN™ S 2001
METABLEN™ S-2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications.FeaturesCan be used with recycled plasticsGood weather stabilityLow temperature impact resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group