products in Transportation: Filler

MITO Material Solutions

MITO® E-GO™

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

MITO Material Solutions

MITO® ACRE™

MITO® ACRE™ is a renewable, sustainable, cornstarch-based additive that can be used to replace non-renewable fillers like mica. Much like MITO® E-GO™, MITO® ACRE™ added to a polymer acts as a scaffold, creating remarkable bonding and adherence. It is easy to use and integrate, with the same reactive dispersion as MITO® E-GO™. For added flexibility, it doesn’t alter the optical properties of polymers and can be processed with pigmentation. Most importantly, the unique structural properties of MITO® ACRE™ greatly improve product performance.   https://mitomaterials.com/products/mito-acre

Glassflake Limited

E GLASSFLAKE MILLED GF500ME

Heartland Industries

85% Imperium Masterbatch (Engineered Hemp Additive)

Heartland's 85% hemp masterbatch can be used with polyolefins, PVC, PS, and other polymers.

Suncolor Corporation

SUNSPHERES™ 03.0

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Glassflake Limited

E GLASSFLAKE UNMILLED GF750E

Glassflake Limited

E GLASSFLAKE MILLED GF750ME

Glassflake Limited

E GLASSFLAKE UNMILLED GF500E

Heartland Industries

Imperium Filler (Engineered Hemp Powder)

Heartland’s Imperium fillers are engineered for polymers. Their particle size typically ranges from 1mm to 6mm.

Glassflake Limited

E GLASSFLAKE MICRONISED GF001E

Suncolor Corporation

SUNSPACERS™ 04.X

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

MSE Supplies

MSE Supplies 1-2 um Alpha Aluminum Oxide (Alumina) Al2O3 Powder 99.999% 5N

Glassflake Limited

E GLASSFLAKE MILLED GF100ME

Glassflake Limited

E GLASSFLAKE UNMILLED GF100E

Glassflake Limited

E GLASSFLAKE MICRONISED GF007E

Suncolor Corporation

SUNSPHERES™ 200 Nm

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Suncolor Corporation

SUNSPHERES™ 15.0

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

MSE Supplies

MSE Supplies 300 nm High Purity 99.99% Alpha Aluminum Oxide Nanoparticles

Suncolor Corporation

SUNSPHERES™ 200 Nm ST-3

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Glassflake Limited

E GLASSFLAKE MICRONISED GF005E

Envirospheres Pty

E-SPHERES® SL75

E-SPHERES® SL75 are fine grade White Hollow Ceramic Microspheres.

Fabpro Polymers

PLEXUS™ 44F

PLEXUS™ 44F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

Fabpro Polymers

PERFORMAX™ HT

Performax™ HT are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAXTM HT Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Envirospheres Pty

E-SPHERES® SL150

E-SPHERES® SL150 is Medium Grade White Hollow Ceramic Microspheres.

Envirospheres Pty

E-SPHERES® SL300

E-SPHERES® SL300 are Coarse Grade White Hollow Ceramic Microspheres.

Fabpro Polymers

GENESIS™ FIBRILLATED

GENESIS™ Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Fabpro Polymers

PERFORMAX™

PERFORMAX™ Synthetic Macro Fibers are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAX™ Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Fabpro Polymers

SPECTER™ MONOFILAMENT

SPECTER™ Monofilament Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

Fabpro Polymers

PLEXUS™ 54F

PLEXUS™ 54F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

Envirospheres Pty

E-SPHERES® SL125

E-SPHERES® SL125 are fine grade White Hollow Ceramic Microspheres.

Envirospheres Pty

E-SPHERES® SL350

E-SPHERES® SL350 are Coarse Grade White Hollow Ceramic Microspheres.

Fabpro Polymers

GENESIS™ XF

GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Envirospheres Pty

E-SPHERES® SLG

E-SPHERES® SLG is Medium Grade White Hollow Ceramic Microspheres.

Fabpro Polymers

SPECTER™ 3.5

SPECTER™ 3.5 Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ 3.5 Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

Envirospheres Pty

E-SPHERES® SL500

E-SPHERES® SL500 are Coarse Grade White Hollow Ceramic Microspheres.

Fabpro Polymers

SPECTER™ HP

SPECTER™ HP Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ HP Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.