products in Marine

3A Core Materials

AIREX® T92.100

AIREX® T92 is a closed-cell, thermoplastic and recyclable polymer foam with very good mechanical properties and an outstanding price / performance ratio. It has an extraordinary resistance to fatigue, is chemically stable and has negligible water absorption. It is thermally stable during high temperature processing and post curing without after expansion or out-gassing. T92 is designed for easy use with all resin systems and processing technologies. AIREX® T92 is ideally suited as a core material for a wide variety of lightweight sandwich structures subjected to static and dynamic loads and/or exposed to elevated temperatures during manufacturing

Textile Products

Textile Products Carbon 3K Fabric Style #4163

Textile Products Carbon 3K Fabric Style #4163 Endless application capabilities for woven materials, Used in Aircraft, Medical, Fiberglass, Marine, Industrial, Recreational, Life Protection.

Nepa Overseas

Nepa Fast Blue 43754

Nepa Fast Blue 43754 is used in Paints & Liquid Inks

Polynt Group

DISTITRON® 152 S1

DISTITRON® 152 S1 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce marine,boats through vacuum infusion,injection molding,rtm method.

Precision Polymer Engineering

Precision Polymer™ Z73B

Z73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

Eager Polymers

Eager Polymers EP4117

Eager Polymers EP4117 is a room temperature curing, rigid, translucent, polyester resin for use with fiberglass fabric. It is an air-inhibited resin so additional layers can be applied without sanding between layers. Consequently, EP4117 is often called bonding resin or laminating resin. Successful applications include boat-building, auto body construction, mother mold production and other reinforced plastic parts by hand lay-up or chopper gun.

Rebelco LDA

Rebelco LDA 281 S

281 S is a carbon Reinforcement.

epsotech Germany

epsotech PE HA2 NC

Epsotech PE HA2 NC is a single layer product made of high molecular weight Polyethylene. Its low temperature, mechanical strength, and abrasion resistance properties have all significantly improved.

Depestele

LINCORE® CP PP 20

LINCORE® CP PP 20 is a compound reinforced with 30% by mass of flax fibers.

Rebelco LDA

Rebelco LDA 300 UT

300 UT is a carbon Reinforcement.

epsotech Germany

epsotech PE HA1 NC

Epsotech PE HA1 NC is a single layer high density Polyethylene product. It is specially formulated and manufactured for fabrication applications.

ADDAPT Chemicals BV

Anticor™ A3N

ADDAPT® Anticor A3N is a water free aluminum anti-corrosion additive. It can also be used for multi-metal protection of Copper/Brass and Ferrous substrates. It is a proprietary blend of phosphonates and organic silicates. All constituents comply with the FDA regulation

Hexcel

HiMax™ FCIM193

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

KEMAT Polybutenes

Polybut™ 80

Polybut™ 80 is a low molecular weight conventional polybutene.

Composite Fabrics of America

Composite Fabrics of America 1072-01: Unidirectional

1072-01: Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

Kamenny Vek

Kamenny Vek BCF 13-150-KV42A direct

Kamenny Vek BCF 13-150-KV42A direct is mainly recommended for pultrusion technology and for processing into woven fabrics, UD tapes, multiaxial fabrics, prepregs and other composite products. It is compatible with polyurethane and thermoplastic (polyamide, polypropylene, polyethylene etc.) resins.

Eurocarbon BV

Eurocarbon BV Glass Fiber GL 025-023

Eurocarbon BV Glass Fiber GL 025-023 is made of A-grade Eglass yarns. To cover a whole range of thicknesses, the program is made of a light, medium and heavy construction. Each range will have a specific range areal weights.

SAERTEX GmbH

SAERTEX® 30007624

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Resoltech

Resoltech 2010 FR

RESOLTECH 2010 FR is a Epoxy auto extinguishing topcoat. Which complies with IMO Solas Part 5 Annex 1 For bulkheads, walls & ceilings linings, floor covering, and primary deck covering. Has applications (Gelcoat, topcoat or casting).

Polynt Group

Polymac® 5050

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.

Jubail Chemical Industries

Razeen® LR 1160

Razeen® LR 1160 is a liquid unmodified epoxy resin based on Bisphenol A with medium to high viscosity. Due to their extremely low chlorine content Razeen® LR 1160 is most suitable for electrodeposition resins and other advanced resins.

Mobile Rosin Oil

Mobile Rosin Oil MR-1092-AT60

Mobile Rosin Oil MR-1092-AT60 is a Short Oil Alkyd Resin. A 60% von-volatile resin in Toluene & Acetone. Very quick drying, quick let-down; designed for maximum benefit in traffic paints where VOC requirements are a factor.

Ecopower Chemical

Crosile® 570

Crosile®570 is 3-Methacryloxy propyl trimethoxy silane. It is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker.

Orca Composites

Orca Composites 151B154

ORCA CS MAT 1 1/2 OZ 4” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Pan Technology Inc.

PanTINT® 18R1657

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Kumho P&B Chemicals

Kumho P&B Chemicals KCA 3430

Kumho P&B Chemicals KCA 3430 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Ark Golden

Ark® 300

Ark® 300 is a low viscosity curing agent designed for low to medium solids coatings with a workable wide range of pot lives and outstanding blush resistance.

Jiangsu Changhai Composite Materials

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Zylogelastocomp

Neoplast™ 155 FT SW B

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Sudaglass Fiber Technology

Sudaglass Fiber Technology BT11

Sudaglass Fiber Technology BT11 is a tough fireproof fabrics, these fabrics are manufactured to varying thickness, weight, weave pattern and weaving technique according to end-use requirements.

Elinor Coatings

BronzeShield®

BronzeShield® is selectively removable on-demand according to timeline, budget and high standards. No sandblasting, xylene or toluene are needed. When it’s time to remove the clear protective coating, apply a zero-VOC non-toxic remover safe for all metal surfaces and perfect for vertical and hard to reach places.

Glonatech (ONEX Group)

ONEX MW 1002

ONEX MW 1002 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Silco, Inc.

Sil-Bond RTV-3500 (Acetoxy)

Sil-Bond RTV-3500 (Acetoxy) is an exceptional mildew resistant one component room temperature vulcanizing RTV acetoxy cure silicone sealant and adhesive. When fully cured, this product creates waterproof and airtight bonds to metal, steel, tile, fiberglass, ceramic, glass, aluminum, painted surfaces, wood, plywood, marble, plus many other common substrates. It is frequently used for interior sealing applications exposed to high moisture; tubs, baths, countertops, etc. This product is specifically formulated to offer all weather performance to meets today's Green Building Standards.

Adaptive Surface Technologies Inc

SLIPS® Foul Protect™

Slips® Foul Protect™ is a barnacles, mussels, and micro-organisms that stick to boat hulls is an ongoing and costly nuisance for commercial and recreational boaters. Any buildup of biofouling leads to increased drag, greater fuel costs, and higher maintenance costs. To address this persistent biofouling problem, AST has developed proprietary surface-active polymers that can significantly improve the biofouling performance of marine hull paints. Our modular additive design works in multiple binder systems, with or without an active biocide. These high-performance additives will enable commercial foul-release coatings to continue to displace conventional copper anti-fouling coatings—reducing operational costs through fuel savings and reducing the overall carbon footprint of commercial shipping.

Lantor Composites

Soric® LRC 3

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Mobile Rosin Oil

Mobile Rosin Oil MR-777-M50

Mobile Rosin Oil MR-777-M50 is a non-volatile resin in Mineral Spirits for general medium oil alkyd use.