Architectural Coatings

AdvanSix

EZ-Blox®

EZ-Blox® optimizes the performance of alkyd-based paint and coating systems by preventing surface skin formation caused by contact with atmospheric oxygen. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, with equivalent efficacy and compatibility. With REACH-certification and a distinct, low-toxicity profile, EZ-Blox® is ideal for paint and coatings producers looking to reformulate high-performance alkyd-based systems after the ECHA's March 1, 2022 reclassification and labeling requirements.

Kraton

Kraton™ FG1901 G

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

allnex

PHENODUR® PR 612/80B

PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes.

Momentive Performance Materials

CoatOSil™ T-Cure Silane Oligomer

CoatOSil™ T-Cure Silane Oligomer may be useful in the development of coating formulations where reactivity with a mercapto silane is desired. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications.

Munzing

AGITAN® 109

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

AdvanSix

AdvanSix Methyl Ethyl Ketoxime (MEKO)

Methyl ethyl ketoxime (MEKO) is a high-efficiency anti-skinning agent used for air-drying paints, inks and coatings. It can also be used to improve the shelf life of silicone adhesives and sealants and the functionality of polyurethane coatings. MEKO meets the most stringent standards for low moisture and high assay. As a safe, cost-effective alternative to MEKO, AdvanSix also offers EZ-Blox®, which provides low risk of exposure and an improved toxicology profile. EZ-Blox® does not require costly reformulation or additional research and development, and independent research shows it is safe as a versatile intermediate for use in Adhesives & Sealants, Automotive & Transportation, Building & Construction, Industrial, Packaging, and Paints & Coatings applications.Adhesive & Sealants Construction adhesives and tapes, labels, and graphic art adhesives. Automotive & Transportation Exterior and body parts, bonding and assembly sealants.Building & Construction Building envelope materials, glazing and window elements, construction sealants and caulks, and other infrastructure applications. IndustrialWater treatment applications.PackagingPackaging primer and lacquer coating applications.Paints & CoatingsCoatings for automotive OEM, commercial vehicles, vehicle refinish, off road, agricultural and construction equipment, rail, mass transit, coil, and metal, as well as architectural coatings, decorative paints and coatings, roof coatings, and concrete coatings.

Heubach GmbH

HEUCODUR® Blue 550

HEUCODUR® Blue 550 is a Complex inorganic color pigment

Munzing

AGITAN® 282

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

Tronox

TiONA® 595

TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.

Scott Bader

Texicryl 13-602

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks and architectural coatings.

Visen Industries Ltd

VISICRYL 7557

Visicryl 7557 is used for high viscosity for textured finishes and paints

Munzing

METOLAT® 780

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Chemical Partners Industry

Chempart® SC-100

Chempart® SC-100 is Polysaccharide Resin that uniquely processed film forming resin. It is a coactive resin which will form a hydrogen bond with alkyd and stabilize water molecules with the enamel coating. Surrounds the dispersed water droplets impeding their attraction with each other, promoting steric stabilization of the water-in-oil emulsion. During water evaporation (Chempart SC100) prevents voids and pinholes from forming in the film, and works to maintain the film's durability and performance.

Tronox

TiONA® 128

TiONA® 128 is a multi-purpose, blue tint tone, chloride-process rutile titanium dioxide pigment, designed to give an outstanding combination of ease of dispersion, excellent optical properties and good durability in a wide range of coating applications.

allnex

EBECRYL® 8413

EBECRYL® 8413 is designed as the pigment grind oligomer, for UV thermoformable ink applications, and should be used in conjunction with the letdown oligomer, EBECRYL® 1300. When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

Georgia-Pacific Chemicals

GP CL-7002

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

ADDAPT Chemicals BV

PEX™ W100KP

PEX-W100KP is a mixture of mono- and di-Phosphate Ester(s). It imparts benefits like: Anti-Corrosion properties and Surface Tension reduction. It is a Phosphate Ester of an Oxo-Alcoholethoxylate with Potassium Hydrogen Phosphate in water.

Munzing

ZINPLEX 15

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

Momentive Performance Materials

CoatOSil™ DRI Waterborne Silicone

CoatOSil™ DRI waterborne silicone resin can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its chemical structure enables CoatOSil™ DRI waterborne silicone resin to overcome the difficulties of combining silicone materials with organic waterborne resins. CoatOSil™ DRI waterborne silicone resin has been shown to improve hydrophobicity and elongation properties when used as a co-binder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil™ DRI waterborne silicone resin can also be considered as a sole binder when maximum thermal and UV stability is a priority. When applied alone, CoatOSil™ DRI waterborne silicone resin cures at room temperature to form an elastomeric film.

Polynt Group

Carbamac® 43-4310

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Reichhold

BECKOSOL AQ® 205

BECKOSOL AQ 205 is a medium oil alkyd latex based on bio-renewable oils that combines good through-cure speed with positive tack-free surface dry. BECKOSOL AQ 205 requires no coalescing solvent for film formation and produces AIM compliant coatings that develop the performance of traditional solvent-borne products. BECKOSOL AQ 205 does not contain alkyl phenol ethoxylates.

Reichhold

KELSOL® 3961-B2G-75

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

Tronox

TiONA® AT-1

TiONA® AT-1 is a technically pure, dry milled anatase titanium dioxide pigment. It is a versatile product, suitable for pigmentary applications where the high whiteness and blue masstone of anatase TiO2 is preferred and for specialty applications where a Ti precursor is needed.

Perstorp AB

Boltorn™ U3000

Boltorn™ U3000 is a  fully fatty acid-modified dendritic polymer with a high concentration of unsaturation. It is used in wood stains and alkyd paints for outdoor applications.  Features Branched structure provides unique flow properties Low VOC Low viscosity Dries rapidly Outdoor durability

Munzing

AGITAN® 350

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

Munzing

AGITAN® A203E

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

Munzing

WÜKONIL® FC 960

WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as façade paints and plasters.WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as facade paints and plasters. Properties and advantages are very good hydrophobic agent Reduction of water absorbency and cracks Improvement of anti blocking Good surface slip Improvement of recoatability and shade stability Reduced adhesion of plasters on working equipment (\"spatula\"). Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Munzing

AGITAN® 120

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

OCI MELAMINE

Melafine®

Melafine® is halogen-free and has a tightly controlled, narrow particle size distribution to ensure a reliable and predictable intumescent process. This makes Melafine the ideal blowing agent for leading coatings producers. Its fine particle size is also fit for use in thin film coatings for architecturally exposed surfaces.

Reichhold

UROTUF® F77-M-60

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® R 630

NEVOSIL® R 630 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 630 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® SI 145

NEVOSIL® SI 145 is a solvent-free, water-diluted emulsion of functional polysiloxanes.

Lawter

Filtrez™ 531A

Filtrez™ 531 A is an alcohol soluble fumaric acid modified rosin ester with a high softening point and moderately high acid value. Filtrez™ 531 A can be used in solvent and water-based flexographic and in gravure inks. This resin can also be used as a leveling and gloss-promoting agent in floor polishes.

Sasol

NOVELUTION PEG 600-85

Sasol Chemicals NOVELUTION PEG 600-85 is a biodegradable polyethylene glycol with an average molecular weight of 600 g/mole. It is essentially an 85% active clear liquid dilution in water. NOVELUTION PEG 600-85 provides a unique property profile, combining high water solubility and lubricity.

Sasol

NOVELUTION 390

Sasol Chemicals NOVELUTION 390 is a liquid, alkyl phenol free and readily biodegradable nonionic ethoxylate for the inks, paints and coatings market.