Building Envelope & Roofing
7,635 products found for Building Envelope & Roofing in Building & Construction
VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.
EZ-Blox® optimizes the performance of alkyd-based paint and coating formulations by preventing surface skin formation due to contact with atmospheric oxygen when, between uses, such formulations sit in containers. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, typically with equal efficacy and compatibility with other components in such formulations. With EU-REACH certification and low-toxicity, EZ-Blox® is ideal for paints and coatings producers looking to reformulate high-performance alkyd-based systems post ECHA’s reclassification of MEKO as a Carcinogen 1B substance on March 1, 2022.
United Initiators MYPC
White, greasy flakes, consisting of technically pure Dimyristylperoxydicarbonate. This long-chained aliphatic peroxydicarbonate is used as an initiator (radical source) in the polymerisation of monomers, e.g. vinylchloride.
SETAQUA® PU F125
SETAQUA® PU F125 is a hard wearing SXL water-based aliphatic PUD for flooring applications, both timber and concrete with high taber abrasion performance.
Kraton™ FG1901 G
Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.
TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U is a UV stabilized polycarbonate resin grade which has a low melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High ultraviolet(UV) stability High flowability Good impact resistance Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.
Radilon® A RV300 100 NAT
Radilon® A RV300 100 NAT is a PA66 30% glass fiber reinforced injection molding grade. Suitable for parts requiring high stiffness and good mechanical resistance.
VYNOVA™ S6630 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.
PHENODUR® PR 612/80B
PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes.
Momentive Performance Materials
CoatOSil™ T-Cure Silane Oligomer
CoatOSil™ T-Cure Silane Oligomer may be useful in the development of coating formulations where reactivity with a mercapto silane is desired. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications.
VYNOVA™ S7102 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a specialty resin suitable for extrusion, calendering or injection molding of semi-rigid and flexible PVC articles such as: cling films, flexible sheets, pool liners, inflatables, roofing membrane, profiles, cables insulation and sheathings, and flooring.
Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.
AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.
POLYCOR® ISO BR WHITE 9199
POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
NORSODYNE® C 55377 AL
NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.
EPOMIN™ P-1050 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.
LURANYL® KR 2403 G6
LURANYL® KR 2403 G6 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.
3H Vinacom PVC Compound
3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.
VYNOVA™ S6706 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.
BECKOCOAT® PU 428/51XMPAC
BECKOCOAT® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems.
ARAKRIL ADC 750
Hard, hydrophobic copolymer for roof coatings, moisture barrier coatings,exterior insulation and finishing systems (EIFS),crack fillers & caulks
A General Purpose Extrusion and Molding Polymer
AdvanSix Methyl Ethyl Ketoxime (MEKO)
Methyl ethyl ketoxime (MEKO) is a high-efficiency anti-skinning agent used for air-drying paints, inks and coatings. It can also be used to improve the shelf life of silicone adhesives and sealants and the functionality of polyurethane coatings. MEKO meets the most stringent standards for low moisture and high assay. As a safe, cost-effective alternative to MEKO, AdvanSix also offers EZ-Blox®, which provides low risk of exposure and an improved toxicology profile. EZ-Blox® does not require costly reformulation or additional research and development, and independent research shows it is safe as a versatile intermediate for use in Adhesives & Sealants, Automotive & Transportation, Building & Construction, Industrial, Packaging, and Paints & Coatings applications.Adhesive & Sealants Construction adhesives and tapes, labels, and graphic art adhesives. Automotive & Transportation Exterior and body parts, bonding and assembly sealants.Building & Construction Building envelope materials, glazing and window elements, construction sealants and caulks, and other infrastructure applications. IndustrialWater treatment applications.PackagingPackaging primer and lacquer coating applications.Paints & CoatingsCoatings for automotive OEM, commercial vehicles, vehicle refinish, off road, agricultural and construction equipment, rail, mass transit, coil, and metal, as well as architectural coatings, decorative paints and coatings, roof coatings, and concrete coatings.
SETAQUA® 6754 is An acrylic copolymer dispersion. SETAQUA® 6754 is a very hard self-crosslinking acrylic copolymer dispersion intended for industrial chemical resistant airor force-dry coatings. Pigmented or clear coatings can be formulated with SETAQUA® 6754 which exhibit good hardness, gloss, chemical and blocking resistance.
Curaphen 22-506 is characterized by high reactivity and contains approximately 3.5% accelerator. It can be modified with conventional additives and is fully compatible with other phenolic hardeners within this range, enabling the formulation of specific custom process requirements.
BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol
ARAKRIL STA 357
Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings
The Polyolefin Company (TPC)
AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.
TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.
HEUCODUR® Blue 550
HEUCODUR® Blue 550 is a Complex inorganic color pigment
ROTEC® ASA S 210
ROTEC® ASA S 210 is ASA, injection molding grade.
ROTEC® ABS 1001 FR V0/4
ROTEC® ABS 1001 FR V0/4 is ABS, injection molding grade, easy-flowing, flame retardant.
TRACEL® DB 140
TRACEL® DB 140 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.
ENYDYNE® H 68377 TAE
ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.
Ethacure® 100 is an effective curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.