products in Shingles & Tiles

Romira

LURANYL® KR 2403 G6

LURANYL® KR 2403 G6 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.

Polynt Group

NORSODYNE® C 55377 AL

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

Polynt Group

POLYCOR® ISO BR WHITE 9199

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group

ENYDYNE® H 68377 TAE

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Polynt Group

Polynt Group HUP 16/23 RB-7035-V

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Polynt Group

ARMORFLEX® 953

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Scott Bader

Crystic® Vinyl Ester Resin VE679-03PA

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Polynt Group

DISTITRON® 629 S

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

ADDAPT Chemicals BV

BioWet™ 150R

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

Polynt Group

EPOVIA OPTIMUM® KRF 1001 TAS

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

Lion Elastomers

Lion Elastomers SBR 1507

SBR 1507 offers the lowest Mooney viscosity of all SBR 1502 type elastomers. It is a light-colored, general purpose, cold SBR elastomer. It enables a maximum filler loading in rubber applications.

Romira

LURANYL® KR 2454-3 G2

LURANYL® KR 2454-3 G2 is a PPE/PS-I, extrusion and injection molding grade, 10% glass fiber reinforced, high heat resistance, non-halogen flame retardant.

Sika

Biresin® CR201

Biresin® CR201 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites with outstanding heat resistance.

Sika

Biresin® CR144

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Polynt Group

DISTITRON® 458 EN2

DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

Polynt Group

ARMORCOTE® SP

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

Polynt Group

NORSODYNE® H 84233 L

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Polynt Group

POLYCOR® ISO BR

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

Polynt Group

NORSODYNE® T 16372

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

Polynt Group

NORSODYNE® O 12335 AL

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

Polynt Group

DISTITRON® 5119 ESX20Q

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Romira

LURANYL® KR 2454-3 G4

LURANYL® KR 2454-3 G4 is a PPE/PS-I, extrusion grade, 20% glass fiber reinforced, high heat resistance, non-halogen flame retardant.

FIBERTEC INC.

MICA 20S

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Polynt Group

DISTITRON® 427 AN2

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Polynt Group

DISTITRON® 510 V5

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

Polynt Group

DISTITRON® 3519 A

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Polynt Group

POLYCOR® ISO PA WHITE 9199

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group

Polynt Group SMC LS 3022 R30

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Lion Elastomers

Lion Elastomers SBR 1006

Hot polymerized SBR 1006 elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.

Polynt Group

ARMORFLEX® 99F

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

3B Fibreglass

3B Fibreglass MF 01 ER

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Polynt Group

NORSODYNE® O 13155 AL

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Polynt Group

DISTITRON® 3519A1V5

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

Polynt Group

OPTIMOLD ll MONOCOMPOSANT

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.