products in Fence, Decks & Rails

Polynt Group

NORSODYNE® 2625

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group

DISTITRON® 429 V8

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

3A Core Materials

AIREX® R82.60

AIREX® R82 is a closed-cell, thermoplastic polymer foam that combines outstanding fire resistance with very low smoke and toxicity, along with excellent dielectric properties. It has an outstanding strength to weight ratio, very low moisture absorption, is thermoformable and ductile. AIREX® R82 is an exceptional core material for use in structural lightweight applications that demand high fire resistance, radar transparency or operation in extremely hot or cold environments

Polynt Group

DISTITRON® 514 Z1

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Polynt Group

NORSODYNE® PT-100KCI

Norsodyne® PT-100KCI - isophthalic-neopentylglycol resin for pultrusion, water resistance. Main applications areas are building and construction, industrial sector etc.

Polynt Group

NORSODYNE® R 56372 TAE

NORSODYNE® R 56372 TAE - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks through continuous laminating method.

Polynt Group

EPOVIA OPTIMUM® EP KRF 1101 TA

EPOVIA OPTIMUM® EP KRF 1101 TA - Bisphenol-A Epoxy Resin based vinyl ester,without styrene. It is used to produce pipes and tanks through continuous laminating method.

Zoltek

ZOLTEK™ PX35 UD500

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Polynt Group

ENYDYNE® I 68871 A

ENYDYNE® I 68871 A - Unsaturated polyester resin in styrene,DCPD. It is mainly used in hand lay up and spray up,injection molding,RTM etc.

Polynt Group

DISTITRON® 316 T80

DISTITRON® 316 T80 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through casting (rods) method.

Polynt Group

DISTITRON® VEef 220 V4

DISTITRON® VEef 220 V4 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce reinforced plastics,general purpose through injection molding,rtm,press and vacuum molding method.

BTC Europe GmbH

AQACell® HIDE 6399 X

AQACell® HIDE 6399 X is an aqueous dispersion of a polymer based on styrene, intended for industrial use only as a raw material. Its applications span various areas, including paints and coatings for building and construction architectural coatings, concrete coatings and stains, decorative paints, wood coatings and finishes, as well as fence, decks, rails, and siding and trim. The physical form of this product is a liquid.

BTC Europe GmbH

Lignostab® 1198

Lignostab® 1198 serves as a photo-stabilizer developed specifically for wood pretreatments. It is highly effective for color stabilization of natural and tinted or stained wood, improving the durability of wood substrates coated with clear and transparent pigmented finishes. It prevents yellowing and darkening when exposed to diffused or direct sunlight.

BTC Europe GmbH

AQAGloss®

AQAGloss® is an aqueous dispersion of an innovative, water-based acrylic/alkyd hybrid. The binder in AQAGloss® enables the formulation of water-based exterior wood coatings and high-gloss decorative coatings, serving as an environmentally advanced alternative with solvent-borne alkyd-like features. It is an anionic dispersion type used in high-gloss decorative coatings and trim paints, offering superior gloss and good gloss retention.

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Espolex® WT570

Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures.   Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts   Features: Excellent impact performance at low temperatures well-balanced mechanical property   Benefits: Mold-in-Color Recyclable

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Espolex® CPD-450

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® CHN-250 Natural

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Espolex® 3785A

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® AGM 250 Natural

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® HGZ 1200 Natural

Noblen® HGZ 1200 Natural is a polypropylene, high crystalline homopolymer with ultra high melt flow, making it great for thin wall molding applications. Applications: Packaging Trim requires excellent balance of flow and stiffness.   Features: Which has high surface hardness Good scratch resistance.

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Espolex® 3675A

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

CTC Plastics

X-Pro® SP200 TF 30 3033

X-Pro® SP200 TF30 3033 is an automotive-certified, general-purpose black polypropylene with 30% talc reinforcement and 98% recycled content, designed for non-visual injection molding applications. This resin is applicable in various industries, including automotive, industrial, construction, consumer, lawn, and garden products.

CTC Plastics

X-Pro® PP 4225

X-Pro® PP 4225 is a medium-impact, high-flow general-purpose polypropylene copolymer made with 98% post-industrial recycled material. It can be used as a low-cost alternative to virgin resin while maintaining comparable quality and processability and is suitable for use in various injection molding applications.

CTC Plastics

X-Pro® PP 4212

X-Pro® PP 4212 is a general-purpose, medium-flow polypropylene copolymer suitable for both injection molding and extrusion applications. It serves as a low-cost alternative to our other resin grades, providing comparable quality and processability.Produced from: Recycled post-industrial polypropyleneColor: BlackApplications: industrialwire and cable constructionProcessing Methods: Injection Molding Melt Flow 10-17 g/10 min Izod Impact 1.5 ft lb/in Tensile@ yield 2000 psiFlexural Modulus 0.05 in/ min 100,000 PSI

Scott Bader

Crystic® Orthophthalic Spray Topcoat 408PA

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Scott Bader

Crestafix® 621CC White 20 Bonding Paste

Crestafix® 621CC White 20 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It exhibits no drainage on vertical surfaces, is highly thixotropic, and provides excellent adhesion and good elongation at break.

Scott Bader

Crestafix® 621CC 30 Bonding Paste

Crestafix® 621CC 30 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It has excellent adhesion and good elongation at break, with no print through and an excellent surface aspect.

Scott Bader

Crestafix® 621CC 10 Bonding Paste

Crestafix® 621CC 10 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It is highly thixotropic and offers excellent adhesion and good elongation at break.

Scott Bader

Crestafix® 621CC 65 Bonding Paste

Crestafix® 621CC 65 Bonding Paste is a pre-accelerated urethane acrylate/isophthalic polyester high-performance bonding paste. It is a non-sagging, filled compound specifically designed for the assembly and bonding of GRP moldings. It offers excellent adhesion and good elongation at break and requires a visual check for an effective catalyst mix.

Scott Bader

Crystic® Polyester Resin U904LVK

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Scott Bader

Crystic® Polyester Resin 406COS

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Scott Bader

Crystic® Polyester Resin 921

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Scott Bader

Crystic® Polyester Resin 397PA

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Scott Bader

Crystic® Resin S15.6

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Dar-Tech Inc.

Ti-Pure™ R-103

Ti-Pure™ R-103 is a rutile titanium dioxide pigment manufactured by the chloride process. Its high opacity and very blue undertone tint produce clean, bright whites at low loadings in clear resins and those with natural color. Ti-Pure™ R-103 is specially formulated to reduce the discoloration of resin compounds and finished plastic products during processing and exposure to ultraviolet light.

Dar-Tech Inc.

Ti-Pure™ R-105

Ti-Pure™ R-105 is a rutile titanium dioxide pigment manufactured by the chloride process that produces bright TiO2. Rutile titanium dioxide is a fine, dry powder that is most widely used as a white pigment. This product is specially designed for outdoor plastic applications, combining a neutral undertone with moderate opacity strength for easy color formulation work. The silica encapsulation technology minimizes the interaction of the TiO2 surface with other materials within the plastic matrix. This product is also treated with an organic-based material to provide excellent bulk flow and processing while minimizing the hygroscopic nature of inorganically coated TiO2.