Interior Fixtures

United Initiators

United Initiators MYPC

White, greasy flakes, consisting of technically pure Dimyristylperoxydicarbonate. This long-chained aliphatic peroxydicarbonate is used as an initiator (radical source) in the polymerisation of monomers, e.g. vinylchloride.

Voelpker Spezialprodukte GmbH

WARADUR® E

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

Samyang Corporation

TRIREX® 3025U

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U is a UV stabilized polycarbonate resin grade which has a low melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High ultraviolet(UV) stability High flowability Good impact resistance Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.

PCC Chemax

EXOfos PB-136

EXOfos PB-136 is an anionic surfactant that belongs to the group of phosphorous esters. This ester is based on tridecyl alcohol ethoxylate and offered in acidic form. In room temperature, the product is provided in the form of clear or lightly murky liquid. The product has acid value ranging from 90 to 150 mg KOH/g and low pour point, i.e. below -20°C.

Diab

Divinycell® H100

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Polynt Group

NORSODYNE® C 55377 AL

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

Polynt Group

POLYCOR® ISO BR WHITE 9199

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Teijin Limited

Panlite® ML-5206ZLP

Injection Molding grade, Light diffusion grade, Weather resistance, Flame resistance

Oxytop

Metox 30

Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.

Kotec

Kotex K-30UVR Polycarbonate

Kotex K-30UVR is a UV stability, Mould release, Medium viscosity

LOTTE Advanced Materials

INFINO SE-1080

Tronox

TiONA® 595

TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.

DuPont

Crastin® SK603 NC010

Crastin® SK603 NC010 is a 20% glass fiber reinforced, lubricated polybutylene terephthalate resin for injection molding.

SACO AEI Polymers

ARMIDAN® NT7510

ARMIDAN® NT7510 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

Polynt Group

ENYDYNE® H 68377 TAE

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Polynt Group

NORSODYNE® 2834

Norsodyne® 2834 - thixotropic, promoted and non-waxed, good chemical resistance, food grade, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Tronox

TiONA® 128

TiONA® 128 is a multi-purpose, blue tint tone, chloride-process rutile titanium dioxide pigment, designed to give an outstanding combination of ease of dispersion, excellent optical properties and good durability in a wide range of coating applications.

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Diab

Divinycell® P150

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Polynt Group

ARMORFLEX® 953

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Polynt Group

Polynt Group HUP 16/23 RB-7035-V

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Albemarle Corp

SAYTEX® RB-7980

SAYTEX® RB-7980 flame retardant is a blend of SAYTEX RB-79 flame retardant,polyol and a liquid phosphate ester. The mixture of the diester/ether diol of tetrabromophthalic anhydride and phosphate results in a lower viscosity liquid than neat SAYTEX RB-79 flame retardant. Application areas are Reactive diol mixture for rigid polyurethane foams, urethane elastomers and coatings.

Velsicol

Velsiflex® 342

Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.

United Initiators

CUROX® M-340

Colourless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitised with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins.

United Initiators

NOROX® CHM-50 RED

NOROX®CHM-50 RED is a red dyed solution of cumyl hydroperoxide in an accelerating phlegmatizer. This red dyed version helps to control homogenous mixing. NOROX®CHM-50 RED is a liquid polymerization initiator for the room temperature cure of vinyl ester resins with the following advantages/properties. • Moderate peak exotherm, typically lower than MEKPs • Moderate gel time in vinyl ester resins • Excellent final cure • Low impurity levels (water, hydrogen peroxide, salts, etc.) • No gas generation

United Initiators

CUROX® M-200

Colourless, mobile liquid, consisting of peroxides based on methyl ethyl ketone, desensitised with phthalate plasticiser. This ketone peroxide is used mainly as an initiator (radical source) in the curing of unsaturated polyester and vinyl ester resins

Scott Bader

Crystic® Vinyl Ester Resin VE679-03PA

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinylester resin, developed for use as an infusion resin with a wide range of gel times dependant on catalyst type and level.

SANAM Corporation

SANMODUR TW-E

SANMODUR TW-E is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 95°C maintaining other performance of conventional product.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fibre reinforced composites parts and moulds with thermal properties up to 130°C.

Diab

Divinycell® PN115

Divinycell PN is a structural thermoplastic core material perfectly suited in a variety of sandwich applications to increase performance and reduce weight. Divinycell PN is used in industrial, transportation, marine and wind applications. It is easy to machine and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and press bonding. The material has a stable closed cell structure and is insensitive to moisture, decay or rot, making it an excellent substitute for organic materials such as balsa and plywood. High density Divinycell PN (PN200 and PN250) is particularly suited for flooring, decking, local inserts in the way of fittings; either tapped or bolted through and has very good screw retention. Divinycell PN is 100% recyclable.

Diab

Divinycell® P100

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Polynt Group

DISTITRON® 629 S

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

Polynt Group

EPOVIA OPTIMUM® KRF 1001 TAS

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

TOSAF Inc.

TOSAF Inc. Light Diffuser LD5825PC

TOSAF Inc. Light Diffuser LD5825PC delivers the ultimate combination of high thermal stability and high light diffusion properties.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.