Building Materials

INVISTA

Dytek® A

DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.

AdvanSix

EZ-Blox®

EZ-Blox® optimizes the performance of alkyd-based paint and coating formulations by preventing surface skin formation due to contact with atmospheric oxygen when, between uses, such formulations sit in containers. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, typically with equal efficacy and compatibility with other components in such formulations. With EU-REACH certification and low-toxicity, EZ-Blox® is ideal for paints and coatings producers looking to reformulate high-performance alkyd-based systems post ECHA’s reclassification of MEKO as a Carcinogen 1B substance on March 1, 2022.

DuPont

Kalrez® Spectrum™ 6375

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

DuPont

Delrin® 100 NC010

Delrin® 100 is a high viscosity acetal homopolymer for use in easy-to-fill molds. Delrin® 100 provides optimum mechanical performance with its excellent combination of toughness and strength.

DuPont

Delrin® 100AF

Delrin® 100AF is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics. Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Kaneka North America LLC

MS POLYMER® S303H

KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer™ S303H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

DuPont

Kalrez® Spectrum™ 7075

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

AdvanSix

AdvanSix Acetone NF Grade

AdvanSix High Purity Acetone NF Grade meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of: Building and Construction Construction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks. Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products. Automotive & Transportation Automotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications. Electrical & Electronics Devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications. Healthcare & Pharma Oral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications. Paints & Coatings Architectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.

allnex

ADDITOL® XL 255 N

Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.

DIC Corporation

DIC.PPS® Z-230

Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

Greene Tweed

Chemraz™ XRZ

Chemraz XRZ is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XRZ include engineering/industrial parts and sealing applications. Primary characteristic: high purity.

NuSil Technology

NuSil™ MED-6670

NuSil™ MED-6670 is a low coefficient of friction silicone coating.

Kaneka North America LLC

SILYL® MAX951

KANEKA SILYL® MAX951 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MAX951™ has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

Kaneka North America LLC

MS POLYMER® S203H

KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer™ S203H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups

Munzing

LUBRANIL® N 20

LUBRANIL® N 20 is a water based dispersion for pasty plasters and waterborne dispersion paints. LUBRANIL® N 20 is very suitable for polymeric, silicate and silicone based systems. Prolongs the open time, Improves the elasticity of the coating, Prevents from cracks and rents, Plastification, Improves the workability of the plaster, Assists to reduce pinholes, Free of any solvents and free of VOC. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

DuPont

Delrin® 500AF

Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Dynasol Elastomers

Paracril™ 3350

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Voelpker Spezialprodukte GmbH

WARADUR® E

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

allnex

SETAQUA® 6756

SETAQUA 6756 is a self-crosslinking, surfactant free acrylic copolymer emulsion that offers excellent hardness, fast drying and good sandability. The product is highly durable and has exceptional chemical resistance. Film properties of SETAQUA 6756 are further enhanced by the resin’s fine particle size. This serves two functions: 1) it maximizes film clarity and 2) improves film formation for better chemical and solvent resistance. SETAQUA 6756 has excellent flow and leveling properties, approaching a solvent borne product

Samyang Corporation

TRIREX® 3025U

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U is a UV stabilized polycarbonate resin grade which has a low melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High ultraviolet(UV) stability High flowability Good impact resistance Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.

Sasol

SASOLWAX 6530SA

SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.

Kaneka North America LLC

SILYL® SAX350

KANEKA SILYL® SAX350 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX350™ has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

Kaneka North America LLC

SILYL® SAX220

KANEKA SILYL® SAX220 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX220™ has performed successfully in various industrial and construction applications. SILYL SAX220™ provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

DuPont

Delrin® 500T BK602

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Kaneka North America LLC

SILYL® SAX400

KANEKA SILYL® SAX400 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX400™ has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

VYNOVA

VYNOVA™ S6630

VYNOVA™ S6630 is a medium molecular weight and medium porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion of PVC articles requiring excellent mechanical properties such as: window profiles, rigid profiles, and pipes.

AdvanSix

AdvanSix Acetone Low Water Grade

AdvanSix High Purity Acetone not only has minimum impurities, but also contains low benzene, and low water. It is produced to the highest standard for key industry segments.Grades of AdvanSix Acetone are commercially available, meeting high purity NF and ACS certification requirements to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications.High Purity Acetone is used in Building and Construction applications as an intermediate in the production of construction adhesives; DIY and Consumer applications as repair adhesives; As a building envelope material intermediate in the production of architectural coatings, Exterior insulation and finishing systems, and glazing and window elements; Decorative paints and coatings, pipes and plumbing cement systems; Construction chemical uses in adhesives; Acetone is used as an intermediate in the flooring and surface segment as floor coatings; Infrastructure coatings and markings; Roofing sealants and caulks. High Purity Acetone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural pest control, and industrial weed and vegetation control. High Purity Acetone is used in the Automotive and Transportation market as an intermediate in the production of aftermarket parts, exterior and body parts, interior parts and lighting; as a coating for aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings.High Purity Acetone is used in Electrical & Electronic markets as an intermediate in the production of devices and assemblies for automotive and consumer electronics, Packaging and assembly adhesives and sealants; Printed Circuit Boards and other semiconductor manufacturing applications. High Purity Acetone is used in the Healthcare & Pharma markets as an oral and dental drug delivery solution and as an intermediate in tubing and fluid handling. NF Acetone is extensively used in API pharmaceutical manufacturing, as an excipient and coating, and processing aid. High Purity Acetone is used in Home and Personal Care markets in nail care applications.High Purity Acetone is used in the Paints & Coatings market in the automotive and transportation segment as an intermediate in aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings; High purity Acetone is used in architectural, decorative, flooring, infrastructure, roads, and paving, wood coatings and finishes applications. Industrial coating applications include agricultural and construction, appliances and consumer goods, coil coatings, container coatings, furniture coatings, and metal coatings. Packaging coating applications include film and foil, overprint varnishes, primers and lacquers and other aerosol coating applications.

Georgia-Pacific Chemicals

GP BRSD-2112

GP® BRSD-2112 coating/adhesive resin is a liquid heat-reactive phenolic-based resin solution.

ELIX Polymers, S.L.

Elix™ ABS P2H-AT

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

SACO AEI Polymers

PEXIDAN® L/T-UV

PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

VYNOVA

VYNOVA™ S5902

VYNOVA™ S5902 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.

VYNOVA

VYNOVA™ S7102

VYNOVA™ S7102 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a specialty resin suitable for extrusion, calendering or injection molding of semi-rigid and flexible PVC articles such as: cling films, flexible sheets, pool liners, inflatables, roofing membrane, profiles, cables insulation and sheathings, and flooring.

allnex

ADDITOL® VXW 6208

ADDITOL® VXW 6208 is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in waterborne alkyd resin, acrylic, epoxy, and urethane emulsions.

allnex

SETALUX® 1184 SS-51

SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

Kraton

UNI-REZ™ 110

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

PCC Chemax

EXOfos PB-136

EXOfos PB-136 is an anionic surfactant that belongs to the group of phosphorous esters. This ester is based on tridecyl alcohol ethoxylate and offered in acidic form. In room temperature, the product is provided in the form of clear or lightly murky liquid. The product has acid value ranging from 90 to 150 mg KOH/g and low pour point, i.e. below -20°C.