products in Decorative Materials & Finishes: Polypropylenes (PP)

Braskem America

Braskem Inspire 114

Braskem Inspire® 114 EU polypropylene impact copolymer is a propylene based resin very suitable for extrusion applications including blown films, sheets, profiles, pipes and blow molded containers. Inspire® 114 EU Performance Polymer has an excellent balance of high stiffness and impact resistance, even at low temperatures. Inspire® 114 EU Performance Polymer combines outstanding mechanical proper es with superior processability due to its high melt strength delivering improved sag properties compared to conventional polypropylenes.

Petkim

Petkim PETOPLEN EH341

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Molgroup Chemicals

TATREN HT 3 06

TATREN HT 3 06 is a homopolymer of good processing stability and it can be processed at high throughput. Additive package of this grade provides low water carry over during production of tapes. TATREN HT 3 06 is characterized by exceptionally high mechanical properties and high stiffness.

Esenttia

ESENTTIA® 03H82

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Esenttia

ESENTTIA® 05H82-AV

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Petkim

Petkim PETOPLEN EH251

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

Petro Rabigh

HOMOPOLYMER POLYPROPYLENE (PP) FS3011E

HOMOPOLYMER POLYPROPYLENE (PP) FS3011E is a polypropylene homopolymer intended for the extrusion of biaxially oriented film. It is easy to process and suitable for high speed BOPP line. The film made from this resin exhibits excellent transparency, excellent mechanical and barrier properties. It is also suitable for metallization.

Pinnacle Polymers

Pinnacle™ PP 1703

3.5 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONS Pinnacle Polymers Polypropylene 1703 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics.The 1703 product provides: Excellent color and processing stability Resistance to gas fading Low water carry-over Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Phillips66

Copylene® CH020XK

COPYLENE® CH020XK is a polypropylene homopolymer made with a non-phthalate catalyst. It is designed for BOPP (biaxially oriented polypropylene) film extrusion applications with high crystallinity. It is made with a non-phthalate catalyst.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound ML003S

LNP LUBRICOMP ML003S compound is based on Polypropylene (PP) resin containing 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound ML004LS

SABIC's Specialties Business LNP LUBRICOMP ML004LS compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized, Low Extractable.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound MFL36S

SABIC's Specialties Business LNP LUBRICOMP MFL36S compound is based on Polypropylene (PP) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound ML008

LNP LUBRICOMP ML008 compound is based on Polypropylene (PP) resin containing 40% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound MG004

LNP LUBRICOMP MG004 compound is based on Polypropylene (PP) resin containing graphite powder. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound ML004

LNP LUBRICOMP ML004 compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound ML004S

LNP LUBRICOMP ML004S compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized.

SABIC's Specialties Business

LNP™ LUBRICOMP™ Compound MX06404

SABIC's Specialties Business LNP LUBRICOMP MX06404 compound is based on Polypropylene (PP) resin containing 20% glass fiber and 15% PTFE. Added features of this grade include: Heat Stabilized, Low Extractable, Wear Resistant.

Micro Powders, Inc.

Propyltex® 230S-3034

PropylTex 230S-3034 are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Micro Powders, Inc.

Propyltex® 230S-3639

PropylTex 230S-3639 are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Tasnee

Tasnee PP H1030

Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.

Tasnee

Tasnee PP H2045

Tasnee PP H2045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.50 g/10min. Tasnee PP H2045 is a medium molecular weight distribution grade with anti-gas fading stabilization system. It exhibits very good spinning performance and excellent mechanical properties.

Tasnee

Tasnee PP H2250

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

Tasnee

Tasnee PP H2350

Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.

Tasnee

Tasnee PP H1045

Tasnee PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. Tasnee PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water-carry-over and low shrinkage. Good balance of strength, shrinkage, splitting tendency. It is compliant to food contact regulations.

Tasnee

Tasnee PP H2245

Tasnee PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. Tasnee PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system. It has excellent gloss and chining properties.

Zylogelastocomp

Neoplast™ 135 FT EB

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Zylogelastocomp

Neoplast™ 145 FT EB

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Esenttia

ESENTTIA® 25C35-EC

Characteristics: Controlled rheology polypropylene homopolymer, medium molecular weight distribution, with high fluidity, with special additives for use on thin coatings at high line speeds to obtain excellent uniformity and adhesion, low neck-in, and thinning (draw-drown) and good properties. Recommended for: Extrusion coating of raffia, paper and other substrates, aluminum and paper laminating.

Re Plano

PLANOPROP® PP 0515 SP

PLANOPROP® PP 0515 SP can be used for a variety of industrial applications (both injection molding and extrusion) which is complied with ISO and DIN standards.

Polychim Industrie (Beaulieu International Group)

Polychim Industrie (Beaulieu International Group) HH10XT Polypropylene Homopolymer

Polynt Group

Rezimac® WR 73-7358

Rezimac® WR 73-7358 is an air-dry modified polyolefin for penetrating stains on vertical wood surfaces. It can be easily formulated into coatings that exhibit excellent application characteristics, drying properties, early water resistance and package stability. Manufactured in North America. All components of this product are listed on the DSL.

Pinnacle Polymers

Pinnacle™ PP 1704

4 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONSPinnacle Polymers Polypropylene 1704 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics.The 1704 product provides: Excellent color and processing stability Resistance to gas fading Low water carry-over Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Zylogelastocomp

Neoplast™ 155 FT EB

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Zylogelastocomp

Neoplast™ 173 FT EB

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

The Hindustan Mineral Products

CALCITE MUF 310 CTD

Calcite MUF 310 CTD is the most common form of natural calcium carbonate. Calcium carbonate minerals are the most important and abundant of all sedimentary rocks. It occurs in crystalline form in white color. It is many times associated with varying proportion of Magnesium Carbonate.

Steinbeis PolyVert

Steinbeis PolyVert PO REGRANULATE LIGHT GREY

Steinbeis PolyVert PO REGRANULATE LIGHT GREY is available in both PIR (post-industrial recycled) and PCR (post-consumer recycled) plastic. With innovative and sustainable production processes, which is a produce recyclate of the highest quality.