products in Building & Construction: Epoxy & Epoxy Derivatives

ADEKA Corporation

ADEKA™ EP-4100E

ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.

Protective Industrial Polymers

Protective Industrial Polymers PIP 100 ESD HB

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

Protective Industrial Polymers

Protective Industrial Polymers PIP 125 ESD WR-GP

Protective Industrial Polymers PIP 125 ESD WR-GP is a two-component, waterborne, solvent free epoxy resin ground plane coating system designed to develop a uniform, non-tracking conductive ground plane to facilitate a consistent electrostatic discharge. When used in combination with PIP 100 ESD HB or PIP 170 ESD SR it produces lower surface resistance readings to meet the mandated requirements of ignition control applications.

Kemper System America

Kemperol® 022

Kemperol® 022 is a two-component, high performance, cold-liquid applied, solvent-free, low VOC, crack-spanning resin for waterproofing beneath tile and stone applications.

ChemSystems

ChemSystems Helix Epoxy Bonder

ChemSystems Helix Epoxy Bonder is a two-component water-based epoxy primer and moisture barrier. It is an excellent adhesion promoter between Helix cement-based overlay toppings and hard surface substrates. Helix Epoxy Bonder forms an impermeable membrane that acts as a moisture barrier and provides crack suppression properties. It is a slow cure product (24 hours) and is designed to be surface seeded with 90 mesh sand for optimum adhesion properties with any cement-based overlay.

ChemSystems

ChemSystems Helix Epoxy Primer

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

Broadview Technologies

Intumax EP200C

Intumax EP200C is a unique two component epoxy fire retardant – intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX®EP-200C forms a continuous char foam that protects products from both heat and flame. The active ingredients in INTUMAX® products are not water soluble and will not leach out over time. INTUMAX®EP-200C is recommended for use as a base resin for specialty coatings. The viscosity is easily reduced by the addition of solvents. Pigments, anti- settling agents and other flame retardants may also be incorporated.

Adesiv SRL

Adesiv SRL Primer HE

Adesiv SRL Primer HE is a solvent free 2:1 two component epoxy primer with a high resin content for consolidating and treating against humidity on cement screeds. It is a high performance solvent free epoxy. They are suitable for underfloor system.

Jubail Chemical Industries

Razeen® SR 5084

Razeen® SR 5084 is an unmodified solid epoxy resin based on Bisphenol A.

Minchem Ltd (ACCS Ltd)

Minchem Ltd (ACCS Ltd) NE60

Minchem NE60 is high-performance epoxy-based acid-resistant material designed to provide maximum resistance to aggressive chemical environments. It is typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Reichhold

EPOTUF® 38-505

EPOTUF® 38-505 is a solvent cut of EPOTUF® 37-001 at 75% solids in xylene

Master Builders Solutions

MasterProtect® 170CR

MasterProtect® 170CR is a high-build, 100% solids epoxy coating. It provides resistance to harsh chemicals, including 98% sulfuric acid, and can be used as a topcoat over epoxy and polyurethane coatings.

Key Resin

Key Resin Key #715 Epoxy Paste Crack Filler

KEY #715 is a 100% solids epoxy crack filler used to patch or repair floor and wall surfaces. KEY #715 is the ideal material for repair of concrete surfaces damaged from environmental or chemical attack. KEY #715 can also be used as a base material beneath coating, slurry, and mortar systems to repair defects in the concrete before coating.

Rhino Linings USA, Inc.

Rhino Linings USA, Inc. 3100 Hardener

Rhino Linings USA, Inc. 3100 Hardener is a Long Pot Life for Civil Engineering.

Triune Chemicals and Materials

Triune Chemicals and Materials LE-834

Triune Chemicals and Materials LE-834 is semi solid type with higher molecular weight which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Chemtek Products

Chemtek Products CF-660

CChemtek Products CF-660 is a two component epoxy striping paint that creates bold and permanent traffic striping lines that with outlast and outwear regular traffic striping paints.

BCC Products

BCC Resins™ BC 5105

BC 5105 is a clear, unfilled, low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

InnoChem

K-Bond QUICK SET Knife Grade

K-Bond Quick Set Knife Grade is a premium quality epoxy adhesive that has been engineered to have the best possible ratio of working time to curing speed. Uses include bonding, laminating, installation of pieces and repairs.

Westcoat

Westcoat EC-34 Epoxy Topcoat

Westcoat EC-34 Epoxy Topcoat is a two-component, 100% solids, medium viscosity, low odor, high-build, chemical resistant epoxy.

Cactus Industrial

Cactus Industrial Cleankeep 5000 DW

Cactus Industrial Cleankeep 5000 DW is a solvent-free epoxy for us in drinking water tanks. It contains no solvent and minimizes the risk of solvent contamination. It is a solvent free epoxy coating.

Denso North America

PROTAL 7900HT™

Protal 7900HT™ is a VOC free, 100% solids epoxy coating for pipelines operating at higher temperatures. It is a high build liquid coating that can be hand or spray applied in one coat in the field or shop. It cures fast to allow quick backfill when applied to hot pipe.

IBA Kimya San. ve Tic. A.S.

IBA Kimya San. ve Tic. A.S. FF20

IBA Kimya San. ve Tic. A.S. FF20 is a thermosetting matt and semimat powder coatings based on epoxy and polyester resins designed for interior applications. It has excellent yellowing resistance.

Euclid Chemical

Euclid Chemical EUCO #512 VOX EPOXY SEALER

EUCO #512 VOX EPOXY SEALER is a two-component, water-based epoxy designed to penetrate and seal concrete surfaces. It fills surface pores resulting in improved wear resistance and lower absorption of water and salts. This system is supplied as a 20% solids formulation.

Epoplex

Epoplex® LS65qs

Epoplex® LS65qs is a two component 100% solids multicomponent hybrid acrylated epoxy coating designed as a very fast setting highway marking coating offering excellent UV stability and abrasion resistance. Epoplex® LS65qs is formulated to provide a simple volumetric mixing ratio of two volumes of Component A to one volume of Component B.

Reichhold

AROFLINT® 608

AROFLINT® 608 is an oxirane-modified ester supplied without solvent. It is used in combination with AROFLINT® 252 Z1-60, AROFLINT® 404-XX-60, AROFLINT® 808-XD-71, or AROFLINT® 91-314 (high acid value polyesters) to formulate high performance, durable coatings.

AOC, LLC

Vipel® F010-CNL-00

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

KREMPEL GmbH

PREPREG system BE (epoxy resin)

PREPREG system BE (epoxy resin) are based on a temperature- resistant modified epoxy resin . Its processing is hot pressing or PREPREG winding. Its tack has no to little stickiness.

Arjunox

Cretelox

Cretelox is a super impact and chemical resistant urethane mortar for concrete repairs and leveling of floors in industrial and marine environments. A trowelable epoxy mortar where high loads, abrasion and impact is a major concern combined with chemical attacks.

International Chem-Crete

International Chem-Crete Chem-floor 45

CHEM-FLOOR 45 is a two component, 100% solids, high modulus, glossy, heavy-duty, epoxy floor coating system. CHEM- FLOOR 45 exhibits excellent chemical resistant to various chemical reagents.

Ciech

EPIDIAN® 6

EPIDIAN® 6 is used in anti-corrosive paints.

Jubail Chemical Industries

Razeen® SR 5062

Razeen® SR 5062 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution and better anti sintering than SR 5071.

Von Roll Isola

ACG® 600 T23

ACG® 600 T23 is composed of epoxy resin and synthetic fabric reinforcement.

Epoplex

Epoplex® MA50

Epoplex® MA50 is a two-component, epoxy polyamine, 100% solids adhesive. Its durability, along with high chemical and abrasion resistance, makes it an extremely effective bonding material suitable for various applications. Epoplex MA50 is formulated to provide a simple volumetric mixing ratio of one volume of Component A to one volume of Component B. Epoplex MA50 is formulated to meet the requirements set forth in AASHTO M 237, Type IV.

Chase Corporation

Chase Corporation Plasgard 410 Epoxy Coating

Chase Corporation Plasgard 410 Epoxy Coating is a two-part, high-build, solvent-free epoxy coating.

RECKLI

RECKLI Epoxy BT

Epoxy BT is a thixotropic pigmented epoxy resin coating.

Ebalta Kunststoff Gmbh

Ebalta Kunststoff Gmbh GH 730BR

ebalta GH 730/BR is a quite versatile two-components epoxy resin with good castability, curing at room temperature. Due to its easy workability as well as its high strength and low shrinkage there’s a big variety of applications as mouldmaking, toolmaking and in foundries. Moreover the high impact resistance and cast thickness of more than 30 mm make even more applications possible.