products in Building & Construction: Polyesters

Polynt Group

NORSODYNE® Y 90286

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Polynt Group

DISTITRON® 184

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

PlastiVerd

PlastiVerd PlastiVerd DESIGN

Plastiverd Plastiverd Design is copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has been specially designed for thick wall applications. This grade presents a higher IV and outstanding mechanical properties.

Peter Greven

LIGALUB GT

Polynt Group

Polymac® HS 57-5789

Polymac® HS 57-5789 is a high solids polyester resin that is HAPs-free. Coatings based on this resin exhibit outstanding overall performance coupled with excellent gloss retention under accelerated weathering conditions. Enamels formulated with polymac® HS 57-5789 are suitable for interior and exterior applications. Manufactured in North America. All components of this product are listed on the DSL.

Polynt Group

DISTITRON® 429 BSX25Q

DISTITRON® 429 BSX25Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Polynt Group

ENYDYNE® C 66141 L

ENYDYNE® C 66141 L - Unsaturated polyester resin in styrene,DCPD. It is used to produce polymeric concrete through casting method.

Samyang Corporation

TRIBIT® 1500G30

TRIBIT® 1500G30 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Polynt Group

Polymac® 5900

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

Romira

ROMILOY® 5240 GF30

ROMILOY® 5240 GF30 is PBT/ASA, injection molding grade, 30% glass fiber reinforced, high dimensional stability, high surface quality.

Polynt Group

Polymac® WR 72-7203

Polymac® WR 72-7203 is a water reducible polyester for industrial baking enamels. Coating systems based on this resin exhibit excellent color and color retention, hardness and flexibility. Water reducible coating enamels formulated with this resin are suitable for interior and exterior applications. It is HAPs-free. Manufactured in North America. All components of this product are listed on the DSL.

Techno Compound

Techno Compound PBT2 Natural (9998)

Techno Compound PBT2 Natural (9998) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Aliancys

Palatal® P4TV-128

Polynt Group

Polynt Group 752-4420

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

AFCONA Additives

Afcona 5010

Anionic wetting and dispersing additive for inorganic pigments, mainly for TiO2 and extenders

Polynt Group

ENYDYNE® I 65133 A

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

Add-Additives

ADD 6622

ADD-6622 stabilizes inorganic and organic pigments in water and solvents. In addition it makes the polar ingredients of universal colorants, which are used in non-polar solvent-based paints, more compatible. This results in:

Peter Greven

LIGALUB 45 ITD

Reichhold

AROFLINT® 809

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Polynt Group

DISTITRON® 429 V8

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

Polynt Group

DISTITRON® 429 ESX20Q

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

IBA Kimya San. ve Tic. A.S.

IBA Kimya San. ve Tic. A.S. PE58

IBA Kimya San. ve Tic. A.S. PE58 is a Qualicoat and GSB approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. It is designed specifically for architectural applications where color and gloss retention are critical.

Aliancys

Synolite™ 0288-I-2

Polynt Group

DISTITRON® 514 Z1

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Polyumac

Polyumac Air-Cell T-200

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

BARLOG plastics GmbH

Kebablend® / EC FE 170501 PBT

PBT functional compound, electrically conductive

Menzolit Ltd.

Menzolit® BMC 0800

menzolit® BMC 0800 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Polynt Group

NORSODYNE® PT-100KCI

Norsodyne® PT-100KCI - isophthalic-neopentylglycol resin for pultrusion, water resistance. Main applications areas are building and construction, industrial sector etc.

Polynt Group

ENYDYNE® I 68871 A

ENYDYNE® I 68871 A - Unsaturated polyester resin in styrene,DCPD. It is mainly used in hand lay up and spray up,injection molding,RTM etc.

Polynt Group

NORSODYNE® R 56372 TAE

NORSODYNE® R 56372 TAE - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks through continuous laminating method.

Polynt Group

DISTITRON® 316 T80

DISTITRON® 316 T80 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through casting (rods) method.

BTC Europe GmbH

Dispex® Ultra FA 4431

Dispex® Ultra FA 4431 is a dispersant for inorganic pigments and fillers in various systems. It reduces grinding and dispersion time, allows increased pigment loading, achieving low VOC levels in highly filled solvent-based systems, and improves gloss, leveling, and flow.

BTC Europe GmbH

Dispex® Ultra FA 4420

Dispex® Ultra FA 4420 is a dispersing agent that stabilizes inorganic and organic pigments in water and solvents. In addition, Dispex® Ultra FA 4420 makes the polar ingredients of universal colorants which are used in non-polar solvent-based paints more compatible.

BTC Europe GmbH

Efka® FA 4610

Efka® FA 4610 is a low-molecular-weight dispersing agent, reducing dispersing time, increasing pigment load, and improving gloss and flow. Is in a transparent, slightly yellowish liquid form, Efka® FA 4610 enhances the efficiency of dispersing agents.

BTC Europe GmbH

Laromer® PE 55 F

Laromer® PE 55 F is a liquid radiation-curable binder and resin designed for compatibility with wood surfaces. Tailored for Building and Construction, Consumer Goods, and Paints and Coatings markets, it excels in applications such as Floor Coatings, Wood Coatings and Finishes, and Furniture. Laromer® PE 55 F provides the benefits of radiation curability and abrasion resistance in a handy liquid form.

BTC Europe GmbH

Laromer® PE 9074

Laromer® PE 9074, featuring radiation-curable and abrasion-resistant properties, is a liquid product for the paints and coatings industry. It finds application in building and construction for floor coatings, wood coatings, and finishes.