products in Building & Construction: Polyethylenes

Trecora Chemical

Trecora Chemical CWP2030

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

QAPCO

Lotrène® FE 3000

Lotrène® FE 3000 is an additive free grade produced by a tubular high pressure process mainly recommended for heavy duty film applications,.

Molgroup Chemicals

BRALEN RB 03-23

BRALEN RB 03-23 is a general purpose grade of low density polyethylene. It is characterized by high environmental stress cracking resistance and very good mechanical properties. This grade is additives free.

Sundow Polymers

WELLPREN® IM868

WELLPREN® IM868 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Prime Polymers

Evolue® SP2020H

Prime Polymers Evolue® SP2020H is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP2020H include film, coating applications and industrial applications.

Ingenia Polymers

Superlink™ 110

Superlink™ 110 is developed by Ingenia for the manufacture of parts to offer a unique combination of high stiffness, low temperature impact properties and excellent ESCR performance. Superlink 110 is UV stabilized for extended outdoor service and is available in natural, black and customer-specified colors. Superlink 110 in various colors will retain at least 80% of each nominal property given below for the natural compound.

Prime Polymers

Evolue® SP1540

Prime Polymers Evolue® SP1540 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP1540 include film, coating applications and wrap.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1150

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

KW Plastics

KW Plastics KWR105M2

KWR 105M2 is a Copolymer, high Density Polyethylene Post-Consumer Resin

R&P POLYPLASTIC

Torlen PE 2K-901 black

Composite polymer material based on high density polyethylene with the addition of carbon black and stabilizing additives. It is used for the manufacture of protective anti-corrosion coating of steel pipes by extrusion as an outer layer.

Braskem America

UTEC® 5541

Braskem America UTEC® 5541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Braskem America

UTEC® 4041

Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Tasnee

Tasnee HDPE 100 Black

Tasnee HD 100 Black is a High Density Polyethylene, black colored resin. The product is classified as PE 100. Tasnee HD 100 Black provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

Polygroup

FloorGrain™ Fine SHP8015-1

FloorGrain™ Fine SHP8015-1 is a thermoplastic high molecular weight polymer in fine particle powder form. These unique materials exhibit very high toughness. FloorGrain™ powders are well suited for use in structural paints and coating applications that require anti- slip characteristic, structural performance, or satin and matt finish effects.

SCG Chemicals

SCG Chemicals LP1060P

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Prime Polymers

Hi-Zex® 7800M

HI-ZEX™ 7800M is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water.Characteristics include: Good ESCR (Stress Crack Resistant) Impact Resistant

Sundow Polymers

WELLPREN® IM888

WELLPREN® IM888 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Prime Polymers

Hi-Zex® 6300M

Prime Polymers HI-ZEX® 6300M is a high Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Applications of HI-ZEX® 6300M include electrical/electronic applications and plumbing/piping/potable water.

KW Plastics

KW Plastics KWR102-8812

KWR 102-8812 BLK is a Copolymer, high Density Polyethylene Post-Consumer Resin, pre-colored black.

Nytef Plastics

ULTRAPOLY LUNS

Ultra Non-Skid® technology initially developed for the United States Navy has been scaled down for commercial use. New to the Ultra Non-Skid® family is Luns permanent non-skid sheet. These non-skid technologies are a direct replacement for non-skid tapes and paints for industrial applications. The product has a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE). The surface of the sheet is covered with anti-skid material comprised of slag.

Petkim

Petkim PETILEN H2-21T

PETILEN H2-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H2-21T contains no additives.

kazanorgsintez

kazanorgsintez HDPE TYPE PE 100 GRADE PE2NT11-9

kazanorgsintez HDPE TYPE PE 100 GRADE PE2NT11-9 is High Density Polyethylene grade used for various applications.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1700

Inhance Fluoro-Seal UH-1700 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Sundow Polymers

WELLPREN® IM898

WELLPREN® IM898 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Michelman

Michem® Emulsion 93235

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

Birch Plastics

Birch Plastics Low-Density Polyethylene (LDPE)

Birch Plastics Low-density polyethylene (LDPE) has a highly diverse chain structure with a combination of both small and large side chains. The density of LDPE ranges between .910-.940 kg/ m3. LDPE exhibits high flexibility and retention of properties at low temperatures. Low-density polyethylene (LDPE) offers excellent corrosion resistance and low moisture permeability. LDPE can be used in applications in which corrosion resistance is of utmost importance while stiffness, high temperatures and structural strength are not. LDPE is a highly flexible type of polyethylene. It is used for strong, flexible consumer items such as screw caps and lids for bottles. LDPE is also commonly found in consumer packing, bags, bottles and liners.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1080

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Nytef Plastics

DENSETEC SIGN

The material is manufactured by extruding one color on the inside and a contrasting color on the outside. The layers are combined while the material is still molten. The result is a homogeneous sheet that is guaranteed not to delaminate, crack or chip. It is superior to other sign materials, which are separate layers of material laminated together. Densetec® Sign Board is easily routed or engraved using current CNC router technology. As the skin of the material is removed by the router, the inside color shows through and, voila, a sign is easily fabricated with minimum finishing requirements. The material does not have to be painted because the color is embedded into the sheet. The durable textured finish resists scratches and marring. The product is UV stabilized to resist deterioration in harsh outdoor environments, making it the perfect signage material.

Daelim Industrial

Daelim Industrial XP9000

Daelim Po1y® XP9000 has a Excellent long-term physical property and impact strength,Excellent environment stress crack resistance (ESCR), water resistance and impact strength by applying hexene comonomer.

Lucobit AG

Lucofin® 1413-t2

SCG Chemicals

SCG Chemicals LP1040T

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

Prime Polymers

Evolue® SP4030

Prime Polymers Evolue® SP4030 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP4030 include film, coating applications and tanks.

Trecora Chemical

Trecora Chemical CWP500

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Prime Polymers

Ultzex™ 1020L

Prime Polymers Ultzex™ 1020L is a Linear Low Density Polyethylene product. It can be processed by film extrusion and is available in Asia Pacific, Europe, or North America. Applications of Ultzex™ 1020L include coating applications and film. Primary characteristic: good sealability.

KW Plastics

KW Plastics KWR105-7525

KW Plastics KWR105-7525 is a Copolymer, high Density Polyethylene Post-Consumer Resin.

Prime Polymers

Evolue® SP2120

Prime Polymers Evolue® SP2120 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP2120 include film, bags/liners and coating applications.