products in Building & Construction: Vinyls, Vinylics & Vinyl Derivatives

Kuraray

Kuraray Poval™ L-508W

KURARAY POVAL™ L-508W by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ L-508W is recommended for adhesive and suspending agent for PVC suspension polymerization.

Fainplast Compounds

Fainplast™ PVC PH 70/A

Fainplast Compounds Fainplast™ PVC PH 70/A is a Flexible Polyvinyl Chloride product. It can be processed by extrusion, pipe extrusion, or profile extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical Applications include Plumbing/Piping/Potable Water.

Diab

Divinycell® H80

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Kuraray

Kuraray Poval™ L-9-78

KURARAY POVAL™ L-9-78 by Kuraray is a porous, specialty polyvinyl alcohol (PVA) grade. Exhibits excellent water solubility, strong film-forming properties and oil & grease resistance. Provides wetting properties on polar substances, good pigmentability, adhesiveness, low ash & VOC content and emulsifying property. KURARAY POVAL™ L-9-78 possible applications include adhesives, specialty papers, building materials and polymerization (emulsion/suspension). Meets SVHC.

Versalis - A subsidiary of Eni S.p.A

Greenflex® FL 55

Greenflex® FL 55 is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FL 55 show a low fish eyes content, high elasticity, good optical properties, good sealability at low temperatures.

Imperial Water-proofing Industries Pvt Ltd.

Rubaloy RA - 7360

Rubaloy RA - 7360 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Swelling and Processability.

AB Specialty Silicones

Andisil® VS 200

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

CoreLite

CoreLite PVC 80

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

AB Specialty Silicones

Andisil® VS 4,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 6

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 2,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 20

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 20,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 100,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

CoreLite

CoreLite PVC 130

CoreLite PVC is a closed-cell, cross-linked polymer PVC foam formulated for durability, strength, and high processing temperatures. It is compatible with multiple resins and adhesives. It has a very low water absorption rate and excellent chemical resistance. Ideal for many lightweight composite applications.

AB Specialty Silicones

Andisil® VS 10,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 5,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 50

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 250

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

AB Specialty Silicones

Andisil® VS 1,000

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Aliancys

Atlac® 580

Saint-Gobain

Korton™ PVDF

Korton PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Korton PVDF include automotive, electrical/electronic applications, aerospace, bags/liners and coating applications.Characteristics include: Flame Rated Chemical Resistant Corrosion Resistant Fatigue Resistant Heat Resistant

Imperial Water-proofing Industries Pvt Ltd.

Rubaloy RA - 70

Rubaloy RA - 70 is the most popular and widely used grade of fluxed NBR / PVC in the polymer ratio of 70-30. It is a non-staining, oil, Ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber with Poly Vinyl Chloride Resin.

AOC, LLC

Vipel® F010-BNT-00

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Petkim

Petkim PETVINIL S23/59

PETVINIL S23/59 is a polyvinyl chloride resin produced by suspension polymerization. PETVINIL S23/59 is a white powder characterized by low average molecular weight and narrow range of particle size distribution. It is suitable for production of rigid and semi-rigid PVC parts.

Kureha Corporation

Kureha Corporation KF 850

Kureha Corporation KF 850 PVDF homopolymer is a low-viscosity PVDF resin typically processed by injection molding. This material offers excellent chemical resistance at ambient and elevated temperatures. PVDF is also inherently UV stable, mechanically tough, abrasion.

AOC, LLC

Vipel® F010-INL-00

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Polynt Group

STYPOL® APVU4000

Stypol® APVU4000 - polyvinyl acetate low profile additive. Class A surface and dimensional stability. Acid modified for thickening in compounding applications. Main applications areas are automotive, building and construction, home and domestic applications, industrial sector etc.

Spolana (Unipetrol Group)

Neralit® 581.0

Neralit® 581.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 581 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.

Engro Polymer and Chemicals

Engro Polymer and Chemicals sabz pvc au-67s

Engro Polymer and Chemicals sabz pvc au-67s is a medium molecular weight suspension resin. It has a porous particle structure and large interior surface. It has high plasticiser take up and absorption rate. On mixing, it results in free-flowing powder with dry feel. It is very low in fish-eyes and foreign matter.

Sylvin Technologies

Sylvin™ 8250-70 Brown 7460

Sylvin™ 8250-70 Brown 7460 is a vinyl compound formulated for extruded garage door seals.

Sylvin Technologies

Sylvin™ 9302-65 FU WHITE 1240

Sylvin™ 9302-65 FU White 1240 is a vinyl compound for outdoor coextrusion applications. This compound contains a antimicrobial.

Kuraray

Kuraray Poval™ L-8

KURARAY POVAL™ L-8 by Kuraray is a porous, specialty polyvinyl alcohol (PVA) grade. Exhibits excellent water solubility, strong film-forming properties and oil & grease resistance. Provides wetting properties on polar substances, good pigmentability, adhesiveness, low ash & VOC content and emulsifying property. KURARAY POVAL™ L-8 possible applications include adhesives, specialty papers, building materials and polymerization (emulsion/suspension). Meets SVHC.

Organik Kimya

Orgal® P 6820

Orgal® P 6820 is Vinyl Acetate-Acrylic Copolymer.

Kuraray

Kuraray Poval™ L-508

Kuraray Poval™ L-508 by Kuraray is a water-soluble polyvinyl alcohol (PVOH) specialty grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ L 508 is recommended for adhesive and suspending agent for PVC suspension polymerization.

Kuraray

Kuraray Poval™ 6-88

KURARAY POVAL™ 6-88 by Kuraray is a polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is notable for its good bonding strength and pigment binding capacity because PVAs have such good cohesion and good adhesion to fibers, fillers as well as pigments. KURARAY POVAL™ 6-88 is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material for the production of aqueous adhesive solution. In comparison to dextrin and casein it has the advantage of a more uniform chemical structure and greater adhesion, being obtained with minimum raw material requirements. It features water-solubility, excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. It is biodegradable and recyclable. KURARAY POVAL™ 6-88 is used in producing silicon base paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.