products in Building & Construction: Binder

Kane International

TIGERLAC 5056

Tigerlac 5056 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5056 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Lone Star Specialty Products

Lone Star Specialties Coal Tar Pitch Liquid

Coal Tar Pitch Liquid is the primary material produced by distilling coal tar and petroleum feedstocks, and it is used as a binder and for impregnation applications in a variety of industries. Lone Star's distillation technology enables us to meet a wide range of customer requirements, and our extensive equipment capabilities allow us to ship liquid and solid pitch via railcar, tank truck, and specialty packaging.

Jubail Chemical Industries

Razeen® LR 2350

Razeen® LR 2350 is a general purpose modified epoxy resin based on Bisphenol A & Bisphenol F. Razeen® LR 2350 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 2350 meets the relevant requirements of the FDA listing.

Mikro Technik GmbH

Mikro Technik GmbH 8036 R/U

Mikro Technik 8036 R/U contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Jubail Chemical Industries

Razeen® LR 2352

Razeen® LR 2352 is a general purpose modified epoxy resin based on Bisphenol A & Bisphenol F. Razeen® LR 2352 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 2352 meets the relevant requirements of the FDA listing.

Novotrade Invest AS

Novotrade Invest AS HCR-115AN

Novotrade Invest AS HCR-115AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Novotrade Invest AS

Novotrade Invest AS HCR-135AN

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Jubail Chemical Industries

Razeen® LR 1166

Razeen® LR 1166 is a general purpose unmodified medium to low viscosity epoxy resin based on Bisphenol A. Razeen® LR 1166 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1166 is meets the relevant requirements of the FDA listing.

Kamsons Chemicals

Kamicryl 76

Kamicryl 76 is an aqueous polymer emulsion specially designed for cementitious compositions. Cement mortars modified with Kamicryl-76 are hard, tough and durable. Compared with unmodified mortars, Kamicryl-76 modified mortars have superior flexural, compressive, adhesive and impact strength, as well as excellent abrasion resistance. They are especially useful where thin sections are desirable and where excessive vibration and heavy traffic are encountered.

Mikro Technik GmbH

Mikro Technik GmbH 8036 R

Mikro Technik 8036 R contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Woellner

Betol 39 T 3

Betol 39 T 3 is an inorganic binder based on modified sodium silicate with special additives.

Jubail Chemical Industries

Razeen® LR 2351

Razeen® LR 2351 is a general purpose modified epoxy resin based on Bisphenol A & Bisphenol F. Razeen® LR 2351 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 2351 is meets the relevant requirements of the FDA listing.

Novotrade Invest AS

Novotrade Invest AS HCR-105AN

Novotrade Invest AS HCR-105AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Lone Star Specialty Products

Lone Star Specialties Creosote Oil

Creosote Oil is created through the distillation of coal tar and petroleum feedstocks. Lone Star's distillation technology enables us to provide distillate oils that meet the standards of the American Wood Protection Association for P1, P2, and P3 creosote, as well as those that meet the specifications for carbon black feedstock. We can ship distillate oils via railcar, tank truck, or ISO container due to our equipment capabilities.

Kane International

TIGERLAC 5058

Tigerlac 5058 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5058 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Melos

Melos PC 31-300

Melos PC 31-300 is a UV and color-stable, transpartent, low emission, one-component PU binder for color quartz mortars. It has a glossy finish. This product shows good chemical resistance against diluted acids and alkalis, salt and waste water and lubricant and oils.

Lesco Chemical Limited

LESTAC P140

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Fiber Partner

Fipatec Low Melt Bico (Recycled Fibers)

Fipatec Low Melt Bico (Recycled Fibers) combine the best qualities of two different polymers to enable innovative new uses. This fiber is normally blended with solid polyester fibers or recycled materials. It is also available also as a flame retardant (FR) edition for automotive.

Lesco Chemical Limited

LESTAC DP110

LESTAC DP110 is brown to dark brown color thermoplastic granule or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Woellner

Betol 39 T

Betol 39 T is an inorganic binder based on especially modified sodium silicate without any volatile organic additives.

Zeocem

Zeocem ZeoSlag

Zeocem ZeoSlag is an admixture for concrete production. The product is made by very fine grinding of granulated blast furnace slag with the addition of natural zeolite (pozzolan).

OPTICHEM

OPTICRYL 2960

OPTICRYL 2960 by OPTICHEM is a Acrylic Polymer Base. It has been Alkaline and Effloresence resistance Acrylic Binder.

Mikro Technik GmbH

Mikro Technik GmbH 339

Mikro Technik 339 contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Kuraray

Kuraray Poval™ 28-99 LA

KURARAY POVAL™ 28-99 LA by Kuraray is a water-soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion and low ash (sodium acetate) content. It possesses good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 28-99 LA is recommended for adhesive for flooring webs, PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry and films applications.

Jubail Chemical Industries

Razeen® LR 2783

Razeen® LR 2783 is a low viscosity epoxy resin based on Bisphenol A\F modified with aliphatic glycidyl ether.

Lone Star Specialty Products

Lone Star Specialties Petroleum Pitch

Petroleum Pitch is the primary material produced by distilling coal tar and petroleum feedstocks, and it is used as a binder and for impregnation applications in a variety of industries. Lone Star's distillation technology enables us to meet a wide range of customer requirements, and our extensive equipment capabilities allow us to ship liquid and solid pitch via railcar, tank truck, and specialty packaging.

Mikro Technik GmbH

Mikro Technik GmbH DT R

Mikro Technik DT R contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Yillong Chemical

CELOCELL™ HEC 350 L(B)

CELOCELL™ HEC 350 L(B) is a nonionic cellulose derivative that dissolves readily in water, either cold or hot. It is used to produce solutions having a wide range of viscosity. Such solutions are pseudoplastic, that is, they vary in viscosity depending upon the amount of stress applied. CELOCELL™ HEC as a thickener, protective colloid, binder, stabilizer and suspending agent in a variety of industrial applications, such as water-based paints, adhesives, emulsion polymers, toothpaste, cosmetics and building products.

Lesco Chemical Limited

LESTAC P130

LESTAC P130 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Darcole Products

Darcole Products DRB 435

DRB 435 is a purified CL-based product used in a wide variety of organic and inorganic industrial binding applications including the agglomeration of limestone, coal, ceramics, and fertilizer, dust control of unpaved roads and stockpiles, and as a low-cost dispersant of various substrates including gypsum and concrete.

Lone Star Specialty Products

Lone Star Specialties Creosote Solution

Creosote Solution is created through the distillation of coal tar and petroleum feedstocks. Lone Star's distillation technology enables us to provide distillate oils that meet the standards of the American Wood Protection Association for P1, P2, and P3 creosote, as well as those that meet the specifications for carbon black feedstock. We can ship distillate oils via railcar, tank truck, or ISO container due to our equipment capabilities.

Novotrade Invest AS

Novotrade Invest AS HCR- 95AN

Novotrade Invest AS HCR- 95AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Lesco Chemical Limited

LESTAC DCPD100

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Mikro Technik GmbH

Mikro Technik GmbH 75aH

Mikro Technik 75aH contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Mikro Technik GmbH

Mikro Technik GmbH DT

Mikro Technik DT contains features such as Protective colloid, Film maker, Thickener, Suspending agent, Water retention agents.

Nyacol

NexSil™ 20

NexSil 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required.