products in Flooring & Surfaces: Polyamides

AdvanSix

Aegis® MBM

Aegis® MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

BTC Europe GmbH

Efka® FA 4610

Efka® FA 4610 is a low-molecular-weight dispersing agent, reducing dispersing time, increasing pigment load, and improving gloss and flow. Is in a transparent, slightly yellowish liquid form, Efka® FA 4610 enhances the efficiency of dispersing agents.

AdvanSix

Aegis® PIR-H55ZIE

Aegis® PIR-H55ZIE resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZIE, its standard, non-recycled counterpart. Aegis® PIR-H55ZIE is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications, including carpet fiber (natural and SDN) and industrial textiles.

AdvanSix

Aegis® PIR-MBM

Aegis® PIR-MBM resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® MBM, its standard, non-recycled counterpart.Aegis® PIR-MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

AdvanSix

Aegis® H55QP Nylon 6 Homopolymer

Aegis® H55QP is a medium viscosity, lubricated, nylon 6 homopolymer well-suited for general extrusion and extrusion coating.

AdvanSix

Aegis® H55ZIE

Aegis® H55ZIE resin is a 2.7 RV, unterminated, medium viscosity homopolymer for monofilament, multifilament and compounding applications.

Micro Powders, Inc.

NyloTex 200

NyloTex 200 is Micronized Nylon 66 for adding texture and surface durability to high temperature coatings.Features and Benefits Provides a uniform and controlled surface texture Imparts surface toughness and durability High melting point polymer is ideal for use in baking or high temperature curing systems Easy to disperse fine powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Micro Powders, Inc.

NyloTex 100

Micro Powders, Inc.

NyloTex 50

NyloTex 50 is Micronized Nylon 66 for adding texture and surface durability to high temperature coatings.Features and Benefits Provides a uniform and controlled surface texture Imparts surface toughness and durability High melting point polymer is ideal for use in baking or high temperature curing systems Easy to disperse fine powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Micro Powders, Inc.

NyloTex 140

NyloTex 140 is Micronized Nylon 66 for adding texture and surface durability to high temperature coatings.Features and Benefits Provides a uniform and controlled surface texture Imparts surface toughness and durability High melting point polymer is ideal for use in baking or high temperature curing systems Easy to disperse fine powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Micro Powders, Inc.

NyloTex 20

NyloTex 20 is Micronized Nylon 66 for adding texture and surface durability to high temperature coatings.Features and Benefits Provides a uniform and controlled surface texture Imparts surface toughness and durability High melting point polymer is ideal for use in baking or high temperature curing systems Easy to disperse fine powder that can be incorporated with high speed mixing Adds texture in low bake (Low E) powder coatings

Adell Plastics, Inc.

Adell™ Polyamide BR-37

Adell Plastics, Inc. Adell™ Polyamide BR-37 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-37: Flame Rated.Typical application of Adell Polyamide BR-37: Automotive

Nylon Corporation of America (NYCOA)

NYCOBOND XN-187

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Nylon Corporation of America (NYCOA)

NYCOBOND XN-287

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

KREMPEL GmbH

PREGNIT TP-PA

PREGNIT TP-PA has high strength, rigidity and toughness.

BB Resins

BB Resins BB-Amide 5033

BB Resins BB-Amide 5033 is a medium low viscosity reactive polyamide resin.

TrueTime Industrial Corporation

BONTAMIDE 2055

BONTAMIDE 2055 is a resin used for floor primer on wet ground bed

Mepol

MEYTEL E66 F40

MEYTEL E66 F40 is a polyamide 66 with a normal viscosity, it is nucleated and lubricated with 40% glass fibers reinforced. It is suitable for general purpose.

DEHONDT COMPOSITES

Nattex P-Preg PA11 UD 750

Natex P-Preg PA11 UD 750 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polyamide 11 with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 750 g/m2.

KREMPEL GmbH

PREGNIT TP-PA12

PREGNIT TP-PA12 has high strength, rigidity and toughness.

IFG

IFG PA

IFG PA are melt-spun and specially designed for nonwoven floor coverings, but also excel in automotive applications. The main properties of PA-fibers include outstanding abrasion resistance, good resilience, excellent adhesion to latex, good chemical resistance and good dye-ability and printing options. IFG color technicians can provide a wide range of customized colors and shades, including black and white fibers. IFG have an in-house color department which creates shades in close cooperation with our customers.

ERREPIEMME

DWMID PA 66 FV50%

DWMID PA 66 FV50% Polyamide reinforced with 50% glass fiber, with good fluidity for injection molding of manufactured articles require very high stiffness.

Mepol

ECO MEYTEL I66 BK

ECO MEYTEL I66 BK is a Polyamide 6 suitable for general purpose.

DEHONDT COMPOSITES

Nattex P-Preg PA11 P1/1 900

Natex P-Preg PA11 P1/1 900 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polyamide 11 with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.

Mepol

ECO MEYTEL I66 F20 BK

ECO MEYTEL I66 F20 BK is a Polyamide 6 with 20% glass fibers reinforced. It is suitable for general purpose.

Remarkplast compounding a.s.

REMAMID®

REMAMID® is a Primary PA materials that have specifically modified properties.

MACRO POLYMERS

MACRO POLYMERS SP – 115

SP-115 is a 2K EPOXY PUTTY

Mepol

MEYTEL E66 F30

MEYTEL E66 F30 is a polyamide 66 with a normal viscosity, it is nucleated and lubricated with 30% glass fibers reinforced. It is suitable for general purpose.

Remarkplast compounding a.s.

LUKAMID®

LUKAMID® is a Primary PA materials with the addition of recycled material of the same type that have specifically modified properties.

ERREPIEMME

ERREPIEMME PA 66 S9005 R

ERREPIEMME PA 66 S9005 R is a Polyamide esthetic, normal viscosity, good fluidity for injection casting parts require mechanical resistance.

BB Resins

BB Resins BB-Amide 5036

BB Resins BB-Amide 5036 a reactive high viscosity polyamide resin.

BB Resins

BB Resins BB-Amide 5011

BB Resins BB-Amide 5011 is a low viscosity polyamidoimidazoline resin.

ERREPIEMME

DWMID PA 66 A27

DWMID PA 66 A27 has a standard viscosity used for injection molding and added as a reinforced to the application even with very high fill percentages (50-60%).

Unifi INC

REPREVE® Recycled Nylon 6

REPREVE® Recycled Nylon 6 opens up a world of possibilities for companies wanting to use recycled high-quality nylon materials. For every 1 lb, of REPREVE® Nylon, 77,000 BTU'S (British Thermal Units) are conserved, equivalent to 0.6 gallons of gasoline. Pre-consumer fiber waste is collected. Collected waste then enters a unique material conversion process where it is reformulated to produce a first quality REPREVE® Recycled Nylon 6 chip. REPREVE Nylon 6 does not contain post-consumer plastics.