products in Floor Coatings

Lawter

Filtrez™ 530A

Filtrez™ 530 A is an alcohol soluble fumaric acid modified rosin ester with a high softening point and high acid value. Filtrez 530 A has good solubility and low viscosity in alcohol and aqueous ammonia solutions, which contributes to high gloss in overprint varnishes. This resin is commonly used in solvent and water-based gravure and flexographic inks. Filtrez 530 A also be used as a leveling and gloss-promoting agent in floor polishes.

Polynt Group

Carbamac® 43-4355

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

AFCONA Additives

Afcona 4201

High molecular weight polymeric dispersant for deflocculation of all type of pigments

Kane International

STYSOLAC AW

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

AFCONA Additives

Afcona 4010

Kraton

Kraton™ D4270 J

Kraton D4270 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied from Japan in the physical forms below. Kraton D4270 JSP - supplied as dusted dense pellets Kraton D4270 JS - supplied as dusted crumb Kraton D4270 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Sapici Spa

POLURENE AD

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

AFCONA Additives

Afcona 2020

This is a very strong defoamer for all solvent-based coatings, not suitable for transparent high gloss clear topcoat

Munzing

AGITAN® P 801

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Kraton

Kraton™ D1184 K

Kraton D1184 K is a clear, branched triblock copolymer based on styrene and butadiene, with a polystyrene content of 31%. It is supplied from North America in the physical form indentified below. Kraton D1184 KT - supplied as a dusted dense pellet Kraton D1184 KU - supplied as an undusted dense pellet Kraton D1184 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Reichhold

UROTUF® F90-E3M-55

UROTUF F90-E3M-55 is a soybean oil modified urethane resin provided at 55% solids in a blend of low aromaticMineral Spirits and volatile methyl siloxane (exempt).solvent

Kraton

Kraton™ D1162 P

Kraton D1162 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from North America in the physical form identified below. Kraton D1162 PT - supplied as a dusted dense pellet Kraton D1162 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Reichhold

EPOTUF® 38-406

EPOTUF® 38-406 is an epoxy ester resin supplied at 60% solids in mineral spirits.

Boud Minerals

Boud Minerals Brown Aluminium Oxide

Boud Minerals Brown Aluminum Oxide is one of the hardest minerals after diamond. It is a synthetic mineral.

Polynt Group

Duramac® 204-1829

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Reichhold

EPOTUF® 37-601

EPOTUF® 37-601 is a modified cycloaliphatic amine adduct based on isophorone diamine intended for room temperature curing of EPOTUF epoxy resins.

Kraton

Kraton™ D0243 E

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

ADDAPT Chemicals BV

ADDAPTOL™ DB

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

Kraton

Kraton™ D1161 P

Kraton D1161 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 PT - supplied as a dusted dense pellet Kraton D1161 PTM - supplied as a dusted powder Kraton D1161 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

AdvanSix

AdvanSix Acetone ACS Grade

With low impurities, low benzene, and low water content, AdvanSix High Purity Acetone ACS grade is produced to the highest purity product requirements for the Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare industries. It meets or exceeds purity standards set by the American Chemical Society (ACS) for food, drug, or medicinal use and can be used for ACS applications or for general procedures that require stringent quality specifications and a purity of ≥95%, including:   Building & Construction Construction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.   Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products.   Automotive & Transportation Aftermarket parts, exterior and body parts, interior parts and lighting.   Adhesives & Sealants Packaging and assembly adhesives and sealants,   Paints & Coatings Aerospace, automotive OEM, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.   Electrical & Electronics Devices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.   Packaging Film and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.   Personal Care Nail care applications.   Pharmaceuticals & Healthcare Oral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

Scott Bader

Texicryl® 13-013

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Polygroup

FloorGrain™ Fine SHP8015-1

FloorGrain™ Fine SHP8015-1 is a thermoplastic high molecular weight polymer in fine particle powder form. These unique materials exhibit very high toughness. FloorGrain™ powders are well suited for use in structural paints and coating applications that require anti- slip characteristic, structural performance, or satin and matt finish effects.

Bomar Specialties LLC

Bomar Oligomers® BR-930D

Bomar®BR-930D is a trifunctional, urethane acrylate oligomer which offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance,and durability. BR-930D is perfect for 3D printing applications usingSLA, 3D inkjet,and DLP printers.

Kraton

Kraton D1124K

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Munzing

AGITAN® P 841

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Munzing

AGITAN® E 255

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Munzing

AGITAN® 299

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

Kraton

Kraton RP6670

Kraton™ G SEBS polymers provide outstanding adhesion to metals and non-polar materials like plastics and composites. Coatings with functionalized Kraton™ RP6670 SEBS deliver exceptional substrate adhesion, durability and corrosion-resistance. These coatings are ideal for the protection of piping, concrete, architectural structures and vehicle undercarriages. It can also be used in building envelope applications such as waterproofing foundations and other structure sections.

Munzing

AGITAN® P 840

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

Huber Engineered Materials

Geotex® FXZ

Geotex® FXZ is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. FXZ can be used as a texturizing agent in coatings, plaster, EIFS, as an abrasive in many applications and as a filler in PVC flooring. The marble crystal structure is useful in recirculation drilling fluids.

Reichhold

EPOTUF® 37-140

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

Michelman

Michem® Lube 160RPH

Michem® Lube 160RPH is APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

PCC Chemax

SULFOROKAnol L327 (Sodium C12-15 Pareth Sulfate)

SULFOROKAnol L327 (Sodium C12-15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Pareth Sulfate), based on synthetic alcohol. The product comes in the form of a 27% water solution, from colorless to light yellow. SULFOROKAnol L327 is preserved with the MIT / CIT derivative, which ensures its microbiological purity.

Munzing

FOAMTROL 10L

FOAMTROL 10L is a versatile, low viscosity and stable silicone emulsion effective in floor care products, wood coatings, lens polishes and in tank-side, non-FDA applications.

ADDAPT Chemicals BV

WaxMul™ C 325

ADDAPT WaxMul C 325 is a wax emulsion based on refined Type 3-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti-Block. It is an emulsion based on T3-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

Pan Technology Inc.

PanTINT® 73K172

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.