products in Flooring & Surfaces

Georgia-Pacific Chemicals

GP 2056

GP® 2056 epoxy hardener is a flake phenolic novolac resin developed by Georgia-Pacific Chemicals as a curing agent for epoxy resins in oilfield, molding compounds, coatings, copper clad laminates, and electrical applications.

VYNOVA

VYNOVA™ S5702

VYNOVA™ S5702 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering and injection blow molding of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, foam core pipes and pipe fittings, injection moldings, including housing, and bottles.

Bomar Specialties LLC

Bomar Oligomers® BR-941

Bomar™ BR-941, a hexafunctional, aliphatic polyether urethane acrylate, isusedin applications that require a hard, chemicallyresistant, non-yellowing coating or adhesive with very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers

Georgia-Pacific Chemicals

GP CL-7003

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Borchers: A Milliken Brand

Borchi® Gol 0011

Modified polysiloxane flow and air release agent for solvent-based and solvent-free coatings systems, 100 % active.

Reichhold

EPOTUF® 37-618

EPOTUF® 37-618 is a solution of 37-615, a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® solid epoxy resins.

Kolon Industries

HIKOREZ® T-3095

Kolon Industries HIKOREZ® T-3095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .

Altropol Kunststoff

AltroColor PU 5023

AltroColor PU 5000 Color Pastes are based on a hydrocarbon resin and have been developed particularly for the coloring of polyurethane ester and 1-C systems. Although our AltroColor Color Pastes of series PU 5000 are based on a non-reactive binder, a complete integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor PU 5023 is flame red colored.

Kraton

SYLVATAC™ RE 5S

SYLVATAC RE 5S liquid rosin ester has broad compatibility with polymers used in flooring and construction applications. With an optimized mixture of resins and plasticizers, SYLVATAC RE 5S can be used as a self-emulsifying blend for water-based acrylic polymers.

Munzing

TAFIGEL® PUR 54

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

Accurate Plastics, Inc.

Acculam™ Epoxyglas Cowskin

Acculam™ Epoxyglas Cowskin comprised of an epoxy resin binder, woven glass substrate and tough outer skins for improved surface wear resistance.This material has high mechanical strength in both dry and wet conditions. It is engineered as a carrier material in the polishing of hard disk drives and silicone chips. Its tough outer skins protect against exposing abrasive glass fibers and extend normal carrier life by more than five times.

Pergan

PEROXAN DC-40 GS

PEROXAN DC-40 GS is Dicumyl peroxide 40%, Granules with chalk.PEROXAN DC-40 GS is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Munzing

AGITAN® P 803

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Petkim

Petkim PETOPLEN EH341

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

Maflon

HEXAFOR™ 6211

HEXAFOR™ 6211 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

Munzing

CERETAN® MX 9820

CERETAN® MX 9820 is a spherical, micronized Polyolefin wax. This product have applications in Printing inks, especially for gravure- and flexo inks, Paints and coatings, especially for powder-, furniture-, parquet- and industrial coatings and Masterbatch.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Munzing

METOLAT® P 590

METOLAT® P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

Reichhold

KELSOL® 580-W-42

KELSOL® 580-W-42 is a water dispersion alkyd resin which cures rapidly whether air dried or baked, with or without melamine or urea crosslinkers. It offers excellent dip and spray properties and rapid air dry. *This product contains less than 2% HAP solvent.

Dynasol Elastomers

Emulprene™ 1012CR

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

QAPCO

Lotrène® FD 0274

Lotrène® FD 0274 is mainly recommended for the extrusion of thin film for light and medium duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.

Valpac

Valpac V-TAC 5951

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

Argon Kimya

ARAKRIL ADC 150 S

Designed for the formulation of interior and exterior coating systems such as paints and resin-bound plasters for high medium and high PVC systems. Due to its chemical composition, it has outstanding water & alkali resistance

Kraton

SYLVARES™ 540

SYLVARES 540 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. The phenolic component improves compatibility with high polarity polymers. The low Tg of SYLVARES 540 resin improves elasticity at low temperature.

Vikram Resins and Polymers

Vikram Resins and Polymers VRP 2121

Vikram Resins and Polymers VRP 2121 is a medium reactive Orthophthalic Acid based Unsaturated Polyester Resin designed for lamination purposes. It has a low viscosity, good wetting, good mechanical properties, and is fast curing. VRP 2121 is suitable for hand lay-up, RTM, and other molding techniques and can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.

Arlon Electronic Materials

Arlon® 55NT

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

QAPCO

Lotrène® FE 8004

Lotrène® FE 8004 is produced by a high pressure tubular process and is mainly recommended for light and medium duty film applications with good optical properties. It contains slip agent (target: 300 ppm erucamide).

Kraton

Kraton™ D1155 J

Kraton D1155 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Japan in the physical form(s) outlined in the grade nomenclature below. D1155 JOP - supplied as dusted dense pellets D1155 JO - supplied as dusted crumb Kraton D1155 J is used as a modifier of polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Petkim

Petkim PETILEN F2-12

PETILEN F2-12 is a low density polyethylene resin produced by high pressure autoclave process. The product is developed for general purpose blown film applications used in packaging industry.

Kraton

Kraton™ D1183 P

Kraton D1183 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1183 P T - supplied as a dusted dense pellet Kraton D1183 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Scott Bader

Texicryl® 13-074

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

C. L. Hauthaway & Sons Inc.

Hauthane L-3415

Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion.Features:VOC-free, APEO surfactant free.Excellent chemical and stain resistance.Forms durable, films under ambient or force-dried conditions.Superior abrasion resistance.Fast water-release properties.

Bomar Specialties LLC

Bomar Oligomers® BR-742S

Bomar™ BR-742S is a difunctional, polyester Urethane Acrylate Oligomer that offers good weatherability. High-impact-strength coatings and inks can be formulated that are non-yellowing and have high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications.

US Polymers - Accurez LLC

US Polymers - Accurez LLC W2K 2002

US Polymers - Accurez LLC W2K 2002 is water reducible polyester polyol for 2K urethane applications to replace solvent based polyols (crosslinks with conventional isocyanates) or 100% solids isocyanate for pure solvent type performance which is mainly used in transportation/flooring/ maintenance.

GRP

GRP ULTRA HIGH & HIGH TENSILE RECLAIM GRP NRF75

GRP Ultra High & High Tensile Reclaim GRP NRF75 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

Maflon

HEXAFOR™ 6242

HEXAFOR™ 6242 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, Bricks and (especially) marble. It can be used also for paper trea™ent.

Prime Polymers

Evolue® SP1540

Prime Polymers Evolue® SP1540 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP1540 include film, coating applications and wrap.