products in Infrastructure, Roads & Paving: Glass Beads & Fibers

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 9114

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 9132

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 6616

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7280

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3032

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3080

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3082

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 6608

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 9007D

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Carolina Technical Fabrics

Style 1510L

Style 1510L is 4.78 oz. per square yard (162 gsm) plain weave finished fiberglass fabric.

Superior Composites

Conformat® N758XS

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

Texonic

Texonic TG-18-P

TG-18-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Jiangsu Changhai Composite Materials

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Chomarat

C-TAPE™ U300P 12K HS

C-TAPE™ U300P 12K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 318 gsm. It is made using 12K HS carbon fiber. This carbon tape is used primarily for local reinforcement with epoxy resin. *FOE fiber available upon request

Jiangsu Changhai Composite Materials

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC450

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC450 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

SKAPS

SKAPS M 0010

SKAPS M 0010 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Vectorply

Vectorply E-QX 4800

E-QX 4800 is a E-Glass fiber type.

Taishan Fiberglass

Taishan Fiberglass EWR580

Taishan Fiberglass EWR580, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

Carbon-Core

Carbon-Core M110P120H

Carbon-Core M110P120H is Chopped Strand Mat.

3B Fibreglass

3B Fibreglass CR 2080

3B Fiberglass CR 2080 consists of multiple continuous strands of smaller tex made from 3B E-CR glass wound onto a bobbin shape without mechanical twist and is free from static electricity generation.Choppable Roving CR2080 is silane sized and specifically designed for Sheet Molding Coumpound (SMC) application. SMC Rovings find appli-cations in automotive parts, sectional panel tanks, electrical items.2080 conforms to BS 14020 and IS 11320.

Texonic

Texonic TG-24-P

TG-24-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Carbon-Core

Carbon-Core M110E100-1T

Carbon-Core M110E100-1T is Chopped Strand Mat.

Saint-Gobain

Saint-Gobain EC6 12 mm

Saint-Gobain Vetrotex America EC6 12 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

Vectorply

Vectorply E-LT 1800

E-LT 1800 is a E-Glass fiber type.

Carbon-Core

Carbon-Core M111P150H

Carbon-Core M111P150H is Chopped Strand Mat.

Saint-Gobain

Staple Fiber CD 11.5 2000 AT

Staple Fiber CD 11.5 2000 AT is a staple fiber, high tex yarns have a higher surface area that is ideal as a filtration medium for gas, dust and aerosols. Vetrotex manufactures a wide range of staple fibers ranging from 7 µm to 25 µm, perfect for use as filtration medium for mist elimination process.

Saint-Gobain

Saint-Gobain EC6 24 mm

Saint-Gobain Vetrotex America EC6 24 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

PROMAX Industries

PROTEC BRIGHT REFLEX HIGH B2100

PROTEC BRIGHT REFLEX HIGH B2100 is a high quality glass beads for road marking and blasting. PROTEC light reflecting glass beads is an integral part of road safety, by keeping the marking visible day and night.

Vectorply

Vectorply E-QX 3500

E-QX 3500 is a E-Glass fiber type.

Microfill K. Zafranas

Microblanc X-Treme

Microblanc X-treme is a extremely white and fine crystalline CaCO3 with pigmentary properties. Due to its particle size distribution, formulators are able to reduce TiO2 significantly, retaining the whiteness, gloss and opacity levels. In colored systems the shades of colors are brilliant due to the very low yellowness value.