Pavement, Highways, Roads & Bridges

INVISTA

Dytek® BHMT

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Kraton

Kraton™ FG1901 G

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Dynasol Elastomers

Solprene® 1205

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Kraton

Kraton™ G1726 M

Kraton G1726 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1726 MS - is supplied as a dusted, dense pellet. Kraton G1726 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton

Kraton™ G1701 M

Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU - supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

INVISTA

Dytek® BHMT-HP

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

Kraton

Kraton™ G1651 H

Kraton G1651 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1651 H in applications that must withstand weathering and high processing temperatures. Kraton G1651 HU - supplied as an undusted powder/fluffy crumb Kraton G1651 HS - supplied as a dusted powder/fluffy crumb Kraton G1651 HF - supplied as a dusted powder Kraton G1651 H is a clear, linear copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.

Kraton

Kraton™ G4609 H

Kraton G4609 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 45.5%w (90 parts/100 parts rubber (phr)). It is supplied from North America iin the physical form identified below. Kraton G4609 HI - supplied as a dusted powder Kraton G4609 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4609 H in applications that must withstand weathering and high processing temperatures.

Kraton

Kraton™ G1702 H

Kraton G1702 H is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. Kraton G1702 HU - supplied as an undusted powder Kraton G1702 HF - supplied as a dusted powder Kraton G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.

Kraton

Kraton™ D4150 K

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

Kraton

Kraton™ D1193 P

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton

Kraton™ G1650 M

Kraton G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1650 MU - supplied as a powder Kraton G1650 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Diab

Divinycell® H100

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Kraton

Kraton™ G1652 M

Kraton G1652 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 MU - supplied as an undusted powder Kraton G1652 MF - supplied as a dusted powder Kraton G1652 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Sasol

SASOBIT

Sasol is a leading supplier of SASOBIT, which is a versatile additive for asphalt mixes. It is a synthetic hard wax used globally in asphalt road construction. SASOBIT is suited for all asphalt applications, including challenging asphalt applications such as heavy-duty asphalt mixes for airports/container terminals. It ensures highly durable asphalt pavements and process reliability, even under adverse conditions.

Polynt Group

NORSODYNE® C 55377 AL

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

Sika

Epolam 2020

EPOLAM 2020 is a Variable reactivity by addition of an accelerator Tg ~80°C

Polynt Group

POLYCOR® ISO BR WHITE 9199

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Kraton

Kraton™ D1165 P

Kraton D1165 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1165 PT - supplied as a dusted dense pellet Kraton D1165 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Composites Evolution Ltd

Evopreg® PFC502

Evopreg® PFC502 prepregs are a range of fire-retardant, pre-impregnated composite materialsbased on a PFA (Polyfurfuryl Alcohol) bioresin. PFA is a thermosetting bioresin derived from crop waste and is similar to phenolic resin but withlower toxicity and VOC emissions. In addition to its environmental credentials, PFA hasoutstanding fire retardant properties, plus excellent temperature and chemical resistance. The prepregs can be supplied with a range of reinforcement fibers and fabric constructions,including woven and unidirectional E-glass fiber and carbon fiber. They can be consolidated byvacuum bagging, autoclave or press molding and are designed for applications includingaircraft interiors, rail interiors, marine, offshore and construction.

Kraton

Kraton™ D1192 E

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton

Kraton™ G4610 H

Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr). It is supplied from North America in the physical form identified below. G4610 HU - supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610 H in applications that must withstand weathering and high processing temperatures.

Kraton

Kraton™ D1161 J

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP - supplied as dusted dense pellets Kraton D1161 JS - supplied as dusted crumb Kraton D1161 JU - supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Polynt Group

ENYDYNE® H 68377 TAE

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Dynasol Elastomers

Solprene® 9618

Solprene 9618 is a 69/31 Butadiene-Styrene multi arm copolymer, polymerized in solution process.It is stabilized with non-staining antioxidant system.This product is presented as a free flowing porous pellet for easy handling and dissolution.Solprene 9618 is designed to be used in high performance adhesive formulations.

Polynt Group

Polynt Group HUP 16/23 RB-7035-V

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Kraton

Kraton™ G1654 H

Kraton G1654 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton G1654 HU - supplied as an undusted powder Kraton G1654 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 H in applications that must withstand weathering and high processing temperatures.

Polynt Group

ARMORFLEX® 953

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Diab

Divinycell® P150

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.

Dynasol Elastomers

Solprene® 1217

Solprene 1217 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system. Is BHT/TNPP free; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1217 is used as compounding ingredient for adhesives, as modifier for thermoplastic resins. It is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles, and heels.

Dynasol Elastomers

Calprene® 401

Calprene 401 is an 80/20 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a radial struc-ture. This product is available in: - Calprene 401 porous crumb. - Calprene 401M powder form dusted with amorphous silica.

Kraton

Kraton™ D1152 E

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Scott Bader

Crystic® Vinyl Ester Resin VE679-03PA

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

General Industrial Polymers

General Industrial Polymers SBS-GP 1000

General Industrial Polymers SBS-GP 1000 is a styrene - Butadiene block copolymer specially designed for asphalt modification, compounding and for solvent based adhesive applications.

Polynt Group

EPOVIA OPTIMUM® KRF 1001 TAS

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.