Brands in Repair & Rehabilitation

Transpatch is a rapid setting, rapid hardening concrete patching material that exhibits excellent flexural properties, shear bond strength and compressive strength. Transpatch offers superior resistance to de-icing salts, petroleum products and other chemicals prevalent on concrete roadways. In addition, Transpatch will not rust or corrode reinforcing steel under moist, humid conditions.

QuakeWrap solutions represent an extraordinary improvement over traditional infrastructure repair methods. We strive on creating new innovative products that result in higher quality, faster construction time and at a lower cost. This is evident by the numerous patented technologies we have developed, such as PileMedic® for repair of deteriorated steel, timber and concrete columns and submerged piles, SuperLaminate® for spot repair of pressure pipes, StifPipe® for repair of gravity or pressure pipes subjected to external gravity loads, and InfinitPipe® a revolutionary onsite manufactured pipe of virtually any size and length.

Alchemco’s Duratite presents you with professional quality waterproofing and surface protection products. Whether you need to plug an existing construction leak or need to lay new concrete, DuraTite will ensure you are covered with its unique formulation for efficient waterproofing. Protect your buildings from the harsh reality of Mother Nature with our complete line of Admixes, Plugs. Utilizing it as a part of our TechCrete, CretePro, or BridgeDECK waterproofing systems will enhance your structure and ensure its longevity against the elements.

Mortartec Silicate™ is an industrial-grade blend of Portland cement, graded silica sand, fibers and silica fume. The mortar may be hand or spray applied, typically from ½” to 2” in depth. Uses include repairing concrete walls, ceilings, lining brick or concrete infrastructure, etc. Mortartec Silicate provides an extremely dense matrix and will accept coatings at earlier ages than typical Portland cement repair products.

ClearPatch™ is a clear rubberized waterproof sealant designed for general use in roof repairs. ClearPatch™ can be applied to dry or wet surfaces and under inclement weather conditions. Its consistency permits easy application even in cold weather.

PMA-2000 is a cold-applied, trowel-grade mastic with excellent low temperature flexibility used for patching and repairing leaks on asphalt roofs. It can also be used for new flashing installations.

Seal Bond manufactures an extensive selection of adhesive and sealant formulas for product assembly and manufacturing applications. Our unique chemistry provides the ability to bond to a wide range of substrates making it an excellent choice for marrying dissimilar materials. Our sealants and adhesives do not require heat for application or cure which reduces overhead and maintenance costs.

Mortartec Cermaico is a next-generation, epoxy-modified mortar. A highly advanced, formulated epoxy blend incorporating cutting-edge waterborne epoxide technology with proprietary engineered curing; combined with a specific balance of Portland cement, hardened ceramics, graded silica aggregate, synthetic fibers and silica fume to produce one of the most coveted mortars in the industrial market today. This results in a smooth mortar application with one of the hardest mortar surfaces in the industry once cured. The Mortartec Ceramico is industrial-grade and exhibits excellent performance properties unlike any mortar technology before it, with incredible adhesive properties, enhanced barrier sealing capabilities assisting with minimizing out-gassing and moisture vapor transmission (MVT).

Alchemco’s ACR product lines feature a full array of products to restore your surfaces to a beautiful look that is ready for whatever use it was originally intended. ACR’s products are specifically and intentionally designed to be environmentally conscious to keep our world safe for generations.

TIQUE Stucco products are proudly made in the U.S.A.TIQUE colors and textures are made from the finest raw materials in the industry. All TIQUE finishes are 100% acrylic based which is both decorative and weather resistant. TIQUE is the superior choice for style, durability, low maintenance, and lasting color. TIQUE offers 64 premium colors covering a broad range on the color spectrum. We can also formulate nearly unlimited custom colors to meet your creative need. TIQUE Stucco products are proudly made in the U.S.A.

Ever-Silic is a silicone system available in high solids and spray grade. Superior resistance to long- term weathering and ponding as well as algae and biologic growth.

Ever-Thane is a polyurethane base and top coat system. Superior resistance to impact and abrasion, chemical exposure, and dirt pickup.

Alchemco’s CretePro presents you with professional quality waterproofing and surface protection products. Using the same base technology, CretePro produces a competitive line of products that can be installed quickly and easily by professional contractors. Protect your buildings from the harsh reality of Mother Nature with our complete line of Ultra Waterproofings! You can rely on CretePro for quality long-lasting performance. CretePro has been evaluated by Underwriters Laboratory and has been NSF61 certified for water quality. This means CretePro perfectly is safe for use on surfaces that contact drinking water.

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

The SILRES® brand comprises a wide range of silicones for coatings, paints and construction applications. The portfolio has been developed and continuously improved since the 1950's when the first silicone resins for building protection originated in WACKER laboratories. It features not only time-tested and innovative products, but also tailored solutions for a host of applications, climates and substrates. And it is supported by a range of extensive services available from our technical centers worldwide which provide further customization and customer-specific options.

When you need top-performing mortars for concrete repairs, bonding/coating agents and the most reliable structural crack injection systems, CRACKBOND® concrete adhesives get the job done with industry-leading formulations engineered by Adhesives Technology Corp.

Uroseal™ 45V polyurethane joint sealant is a two-components, aliphatic, chemically curing, 100% solid urethane sealant formulated as a high build coating / joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality elastomeric sealant. Uroseal™ 45V is ideally suited for indoors or outdoors with use on concrete, wood, and most construction materials. Uroseal™ 45V produces a flexible, long‐lasting sealant with extraordinary adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and many chemicals. Provides corrosion protection and chemical resistance; and because of its mixed gel‐state, it is specially designed for use on vertical and overhead applications.

VINNAPAS® is WACKER’s brand name for a versatile range of polymer-based dispersions, powders and resins that are used to improve the properties and performance of products in a wide range of industries. The portfolio has been continuously improved and optimized since the 1950s. Thus, VINNAPAS® products set the standard and are leading in many applications.