products in Repair & Rehabilitation

L & L Coatings Corporation

L & L Coatings Corporation L&L #300 Mastic UL Classified

L&L #300 Mastic UL Classified is a high-build, waterborne, elastomeric barrier coating. Its unique blend of premium acrylic resins and pigments combine to form a durable, mildew-resistant film with exceptional adhesion and flexibility. L&L 300 is a breathing mastic which allows damaging substrate moisture to escape, while protecting against ultra-violet, water and air-flow intrusion.

AQUAFIN

AQUAFIN® InjectProECO-SEAL

AQUAFIN® InjectProECO-SEAL is a water activated, flexible, hydrophilic polyurethane injection grout with high tensile and bonding strengths. InjectProECO-SEAL is designed for sealing leaking cracks or joints in below grade concrete structures with continuous moisture exposure. InjectProECO grouts are formulated with the newest phthalate free technology to be enviornmentally friendly and contain zero VOC’s.

Epoxytec

CPP™ Sprayliner™

CPP™ Sprayliner™ is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength and reinforced epoxy. Equal to “standard” CPP once cured, this version is packaged more conveniently for spray applicators seeking to utilize plural-component heated spray application. The material can be sprayed ultra-high build, between 1/16” - 1/4” (62.5 - 250 miles) per pass. Blended with reinforcing agents and various fibers, the Epoxytec CPP™ Sprayliner™ when cured creates reinforcement lining as a fiber-reinforced-polymer (FRP), with high strength and flexural properties for partially or fully deteriorated structures.

US SPEC

US SPEC Aquacoat

US SPEC Aquacoat is a one-component, dry polymer-modified blend of portland cement, admixtures and proprietary aggregates. Aquacoat is designed to withstand hydrostatic pressure and waterproof concrete and masonry surfaces. Aquacoat is a vapor transmissive product that prevents vapor build-up that leads to blistering, flaking and peeling. Aquacoat can eliminate the need for tuckpointing old masonry structures. Aquacoat will fill small holes and voids as an ideal cosmetic treatment for interior and exterior surfaces.

Epoxytec

CPP™ Gel™

CPP™ Gel™ is a two-component, high strength, extremely forgiving/tolerant, vertical and overhead, non-sag. fast set epoxy paste, packaged in a convenient 1-to-1 mix ratio to use as needed and restock. The Epoxytec CPP Gel provides a point-of-use application to save time and material. The material has a wide variety of applications and is often sought for concrete, steel, and other substrate repairs, filling, patching and as an adhesive. Epoxy-based material is a sealed and protective solution to combat corrosion.

Alchemo

CretePro® UltraPLUS Waterproofing Agent

CretePro® UltraPLUS Waterproofing Agent is a modified silicate solution that provides long-term waterproofing and durability benefits to concrete. It penetrates into concrete and reacts with free calcium and water to form a calcium silicate gel complex in cracks, pores and capillaries. This gel creates a sub-surface barrier against the ingress of water and contaminants such as chloride ions. CretePro® UltraPLUS Waterproofing Agent will seal stable cracks up to 5/64” in width and will seal future, non-structural cracks, up to 1/64”. In the matrix, the product remains reactive when in contact with water, to provide autogenous healing properties to future hairline cracks that increase in size.

Ever Performance Polymers

Ever-Thane® Base Gray

Ever-Thane® Base Gray is a versatile, multi-purpose aromatic single-component, fire retardant, moisture cured, liquid polyurea-urethane coating designed for use as a base coat or for repair work on a variety of mature roof systems: spray polyurethane foam, single-ply, metal, built-up roofs, modified bitumen, and concrete.

Applied Technologies

Applied Technologies 5978-14 Silver Epoxy

Applied Technologies 5978-14 Silver Epoxy is a high solids, one-component, silver filled epoxy designed for screen printing. Applications include printed circuit board repairs, electrical solder replacement, chip bonding, die attachment, static discharge/grounding, windshield bus bars and use as a general conductive cement for heat sensitive components. This material exhibits outstanding adhesion to a variety of substrates including ceramic, glass, metal, and plastic.

Anchor Seal

Anchor Seal SY5822D* Clear

Anchor Seal SY5822D* Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is rapid cure, low color, mercaptan (sulfur) odor and is not recommended for underwater use..

Alchemy Spetec

Alchemy Spetec AP NS950 Epoxy

Alchemy Spetec AP NS950 EPOXY is a two component, non-sag structural epoxy designed to offer exceptional mechanical strength in anchoring/ bonding applications. Due to its high bond strength to concrete, it is ideal to use for anchoring threaded rod or rebar dowels. The consistency of AP NS950 EPOXY is good for capping for crack injection or general surface repairs. AP NS950 EPOXY is 100% solids, VOC free and Butyl Glycidyl Ether (BGE)* free.

Polygem

Polygem Sinmast 4 Rapid

Polygem Sinmast 4 Rapid is a fast-setting, fast-curing industrial epoxy formulated for concrete patching and repair. Mix Polygem Sinmast 4 Rapid with sand or aggregates to make epoxy grouts. Polygem Sinmast 4 Rapid is also an excellent choice for fiberglass lay up and laminating applications. Polygem Sinmast 4 Rapid does not contain solvents or toxic styrenes.

United Asphalt

DEL-VAL 240 HYLASTOSEAL (HLS)

DEL-VAL 240 HYLASTOSEAL (HLS) is a gray single component hybrid elastomeric sealant. HLS is the ultimate repair product, designed for the challenges often associated with roof repair.

Tennant Coatings

ReVue™ CRM

ReVue™ CRM is a high-quality repair mortar. It is simple to work with and can be used for both interior and exterior applications.

Ever Performance Polymers

Ever-Thane® Base Plus

Ever-Thane® Base Plus is a versatile, multi purpose, aromatic, single component, fire retardant, moisture cured, liquidurethane coating designed for use as a base coat or for repair work on a variety of mature roof systems, including, spray polyurethane foam, single-ply, metal, built-up roofs, modified bitumen, and concrete roofs.

Crafco

Crafco PAVEMENT JOINT ADHESIVE

Crafco Pavement Joint Adhesive is a hot-applied modified asphalt composition used to adhere and tack longitudinal cold construction joints in asphalt concrete pavements. Pavement Joint Adhesive increases durability and life of joints through improved bonding and sealing. Long-term research in several studies has proven that Crafco Pavement Joint Adhesive provides the best joint performance of all methods available.