products in Other Building & Construction Applications: Polyethylenes

Vycom CPG International

TimberLine™ Woodgrain HDPE

TimberLine™ Woodgrain HDPE offers the most authentic, high-end look and texture of wood…and set your imagination free. TimberLine™ captures the eye with embossed woodgrain and unique coloring sheet to sheet, opening up new potential for cabinetry, kitchens, landscape architecture, marine use and other applications. Delivering the high-end, welcoming atmosphere normally achieved with wood, and retaining its natural color and wood texture. Through technologies that offer the highest level of performance and durability, TimberLine is low maintenance and worry-free. Designed with sustainability in mind, it offers unmatched versatility in exploring design possibilities, and even the flexibility to be heated and shaped for custom projects. Now you can transform any outdoor environment into a beautiful space for a lifetime of enjoyment.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1250

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Trecora Chemical

Trecora Chemical CWP2030

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1150

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1080

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1700

Inhance Fluoro-Seal UH-1700 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Trecora Chemical

Trecora Chemical CWP500

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical

Trecora Chemical CWP400

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Forever Plast

FORLENE® HDPE 1.115

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1750

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Silon

TABOCAB® SXG 011

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Silon

TABOCAB® SXI 005

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Forever Plast

FORLENE® HDPE 8.503

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Hyundai EP

PLASMER® 1025BM/NM

PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Jonam Composites

AtenPly GPE35

AtenPly GPE35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Nytef Plastics

DENSETEC HMW

Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.

Trecora Chemical

Trecora Chemical CWP400E

Trecora Chemical CWP400E is a polyethylene wax. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Silon

TABOCAB® SXI 009

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Forever Plast

FORLENE® HDPE 8.564

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Hyundai EP

PLASMER® 1045BM/NM

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Hyundai EP

PLASTOMER® 1075B/N

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.

Hyundai EP

PLASMER® 1055BM/NM

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1045

Inhance Fluoro-Seal UH-1045 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Diamond Plastics GmbH

Diamond Plastics GmbH DiaPow HDPE HX

Diamond Plastics DiaPow HDPE HX is a polyethylene laser sinter powder black with very high chemical resistance.

Durfoam

DurProx® Physically Crosslinked Polyethylene Foam

DurProx® Physically Crosslinked Polyethylene Foamcan be produced with advanced technology, have superior mechanical properties and an advanced dimensional stability. The product is extruded with the help of additives and lastener's which is followed by the electron beam process. After the electron beam process with hot oven operation the physical characteristic of the product increases by means of dilatation, and a product with a very closed-cell structure and a smooth surface is obtained. It can be produced for different sectors in cut plate, roll, tube, extra-laminated or non-laminated forms.

Trecora Chemical

Trecora Chemical CHU610

Trecora Chemical CHU610 is a polyethylene wax. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CHU610 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Silon

TABOCAB® SXI 007

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Trecora Chemical

Trecora Chemical CHU561

Trecora Chemical CHU561 is a polyethylene wax. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax.

Silon

TABOCAB® SXG 010

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1035

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Trecora Chemical

Trecora Chemical CWP500E

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Inhance Fluoro-Seal

Inhance Fluoro-Seal UH-1900

Inhance Fluoro-Seal UH-1900 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Hyundai EP

PLASMER® 1065BM/NM

PLASMER® 1065BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1065BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Hyundai EP

PLASMER® 2065B/N

PLASMER® 2065B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 2065B/N can be reused without scrap during processing.

Trecora Chemical

Trecora Chemical OX-18

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Hyundai EP

PLASTOMER® 1080B/N

PLASTOMER® 1080B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1080B/N is a fully crosslinked product and can be reused without scrap during processing.