products in Appliances & Electronics

Teijin Limited

Panlite® G-3320M

Glass fiber reinforced grades-20% Glass fiber, Isotropy grade

Mitsubishi Chemical Group Corporation

METABLEN™ SX-006

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Shamrock Technologies Inc.

HYDROCER 257

Hydrocer 257 is a stable, non-ionic aqueous synthetic wax dispersion.

King Industries

NA-SUL® CA-770FG

NA-SUL® CA-770FG is a premium rust inhibitor for petroleum and synthetic lubricants, greases, and rust preventive fluids. It provides excellent demulsibility and filterability and is compatible with a wide range of additives and base stocks.

King Industries

NA-LUBE® AW-6400FG

NA-LUBE® AW-6400FG is an ashless rust and corrosion inhibitor and antiwear additive.

NuSil Technology

NuSil™ FS-3730-2

NuSil™ FS-3730-2 is a fluorosilicone adhesive/sealant.

Kraton

UNI-REZ™ 2218

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Sika

Biresin® CR131

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

LOTTE Advanced Materials

Starex TX-0510T

Toray

Amilan® CM3001-N

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Arlon Electronic Materials

Arlon® AD300

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Nylene

Nylene® 323 HS

Nylene Heat stabilized nylon 6 copolymer for both extrusion and injection molding Exhibits excellent flexibility and impact resistance in addition to the heat and chemical resistance of nylon 6 resins Suitable for flexible tubing and overmolding extrusions as well as molding applications that require maximum flexibility from a nylon type resin

Precision Polymer Engineering

Perlast® G70H

Description Perlast® G70H provides optimal performance in high-temperature, chemically and mechanically demanding environments. This highly reinforced material offers extended seal life, offering low plasma etch rates in flat panel and thin-film solar CVD processes and the high mechanical strength needed to cope with the high forces repeatedly applied in these large scale applications.Perlast® G70H is available as fully molded O-rings (any size up to 2m/6.5ft internal diameter) and fully molded formed slit valve door seals up to 3m in length for generation 10 and above.Key Attributes Excellent plasma resistance High temperature performance High mechanical strength High abrasion resistance Extremely low out-gassing properties Typical Applications Slit valve door seals ISO valve seals Load lock seals NW / KF / ISO O-rings

Kraton

Kraton™ D1119 P

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

BARLOG plastics GmbH

Keballoy® EP 23

BARLOG plastics GmbH Keballoy® EP 23 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window.

Grupa Azoty S.A

Tarnoform® 300 GF4

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Key Polymer

Tough-Seal 21 A

Tough-Seal 21 A is a tough and durable two component, fast gelling, hybrid epoxy elastomer electrical potting compound with excellent thermal cycling performance. KEY Tough-Sealhas the flexibility of a urethane and the service temperature of an epoxy.

NuSil Technology

NuSil™ CV-2942

NuSil™ CV-2942 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 1.0 W/m-K, Primed Lap Shear 375 psi (2.6 MPa).

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Grupa Azoty S.A

Tarnoform® 300 GF3

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Kraton

UNI-REZ™ 2215

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Polyplastics Group

Topas® 5013L-10

Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer

Precision Polymer Engineering

Precision Polymer™ V70SW

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Toray

Toraycon® 1101G30

Toray Toraycon® 1101G30 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application Automotive. Primary characteristic includes flame rated.

Chi Mei Corporation

Wonderloy® PC-345

WONDERLOY® PC-345 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

Polynt Group

Polynt Group SMC LS 3800 R25 RF C NERO

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Precision Polymer Engineering

Perlast® G75TX

Description Perlast® G75TX is the ultimate ‘next generation' perfluoroelastomer, offering a combination of excellent chemical resistance and ultra-high temperature stability, simultaneously extending the operating limits in all aspects.Perlast® G75TX has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in- service performance in, for example, valves, pumps and mechanical seals.Perlast® G75TX is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft external diameter) and custom shapes.Key Attributes Very high temperature resistance Ultra low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperatures Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

Kotec

Kotex KG-10MRA Polycarbonate

Kotex KG-10MRA Polycarbonate is a glass fiber 15%, carbon fiber 15% conductive, mold release.

Han Nanotech

POLYB® AM-07

POLYB® AM-07 is an additive added to attain a matte finish and/or to lower the gloss of a plastic part. Effective in lowering gloss of ABS, PC/ABS alloy, ASA and keep the physical properties of resin.

Osterman & Company Inc.

Osterlene® HD0860

Osterman & Company Inc. Osterlene® HD0860 is a narrow molecular weight distribution homopolymer that exhibits enhanced flow characteristics and a good balance of stiffness and impact resistance.Osterlene HD0860 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Precision Polymer Engineering

Precision Polymer™ V71C

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications.V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance.V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold (Arctic) operating environments Mechanical seals Flow meters & sensors Seal applications that are exposed to cold situations or high temperature variations.

Toray

Ecodear® V554X51

Toray Ecodear® V554X51 is a Polylactic Acid (PLA) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, flame retardant, eco-friendly/green and halogen free.

Saint-Gobain

Exac™ ECTFE

Exac ECTFE is an Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) product. It is available in North America. Applications of Exac ECTFE include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Ergon, Inc.

HyPrene 100

This severely hydrotreated naphthenic process oil provides good solvency for the rubber and chemical processing industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

Precision Polymer Engineering

Perlast® G76W

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

IGM Resins

Omnirad 2100

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.