products in Appliances & Electronics

Grupa Azoty S.A

Tarnoform® 300 GF4

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

BARLOG plastics GmbH

Keballoy® EP 23

BARLOG plastics GmbH Keballoy® EP 23 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window.

Kraton

Kraton™ D1119 P

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Precision Polymer Engineering

Perlast® G70H

Description Perlast® G70H provides optimal performance in high-temperature, chemically and mechanically demanding environments. This highly reinforced material offers extended seal life, offering low plasma etch rates in flat panel and thin-film solar CVD processes and the high mechanical strength needed to cope with the high forces repeatedly applied in these large scale applications.Perlast® G70H is available as fully molded O-rings (any size up to 2m/6.5ft internal diameter) and fully molded formed slit valve door seals up to 3m in length for generation 10 and above.Key Attributes Excellent plasma resistance High temperature performance High mechanical strength High abrasion resistance Extremely low out-gassing properties Typical Applications Slit valve door seals ISO valve seals Load lock seals NW / KF / ISO O-rings

Kraton

UNI-REZ™ 2215

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Grupa Azoty S.A

Tarnoform® 300 GF3

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Polyplastics Group

Topas® 5013L-10

Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer

LOTTE Advanced Materials

Starex TX-0510T

Toray

Amilan® CM3001-N

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

NuSil Technology

NuSil™ FS-3730-2

NuSil™ FS-3730-2 is a fluorosilicone adhesive/sealant.

Kraton

UNI-REZ™ 2218

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Precision Polymer Engineering

Precision Polymer™ V70SW

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Toray

Toraycon® 1101G30

Toray Toraycon® 1101G30 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application Automotive. Primary characteristic includes flame rated.

Chi Mei Corporation

Wonderloy® PC-345

WONDERLOY® PC-345 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

Greene Tweed

Chemraz™ XPE

Protection against oxygen-infused plasma is key in many etch chamber environments. These harsh environments often breakdown non-resistant materials, causing harmful particulation and, ultimately, defective chips.Greene, Tweed's Chemraz® XPE is highly resistant to O2 plasma and can be used in a wide range of applications, such as slit valve doors, reaction chamber lid seals, and gate valve seals. This advanced elastomeric material offers the semiconductor and solar industry an alternative to legacy products that quickly erode in the oxygen environment. With excellent resistance to both 02 and CF4 plasmas, this material affords an increased chip yield and maximized production. In addition, XPE seals provide customers with an increased MTBR (mean time between repair) to reduce downtime and maintenance costs.

NuSil Technology

NuSil™ R2-6755

NuSil™ R2-6755 is a clear silicone elastomer.

NuSil Technology

NuSil™ R-2160

NuSil™ R-2160 is a red, high temperature silicone elastomer.

LOTTE Advanced Materials

INFINO GC-1036

LOTTE Advanced Materials

Starex SD-0150 U

Idemitsu Chemicals

Xarec® S 105

Chi Mei Corporation

Polyrex® PH-88S

POLYREX® PH-88S is a High Impact Polystyrene product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

National Petrochemical Industrial Company (NATPET)

Teldene® H03ML

Teldene® H03ML is used as injection molding for house wares, toys, small appliance parts, Raffia and automotive compounding.

Teijin Limited

Panlite® LV-2225Y

Teijin Limited Panlite® LV-2225Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® LV-2225Y are: Flame Rated Good Mold Release Low Viscosity

Pan Technology Inc.

PanTINT® 12R1659

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Samyang Corporation

TRIREX® 3030PJ

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3030PJ is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Granule Type Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3030PJ resin grade is designed for Compounding. High viscosity. Transparent colors only.

Kraton

Kraton™ A1536 H

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton

UNI-REZ™ 2521

UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.

Kraton

Kraton™ D4271 J

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton

Kraton™ D1102 E

Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1102 ET - supplied as a dusted porous pellet Kraton D1102 EU - supplied as an undusted porous pellet Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Arlon Electronic Materials

Arlon® AD270

Arlon's AD Series is a group of woven fiberglass-reinforced PTFE composite materials designed for use as printed circuit board substrates. These materials combine the excellent low loss electrical properties of PTFE resin with the enhanced value of costeffective heavier fiberglass styles to provide low cost laminate materials suitable for high volume commercial wireless communication applications.The AD Series is currently available in a limited combination of dielectric thickness (0.015" - 0.062") and dielectric constant (2.5 - 3.5). Thicker dielectrics can be developed to meet customer requirements. The higher weight ratio of fiberglass to PTFE resin yields laminates with greater dimensional stability than is normally expected of PTFE-based substrates.Stability of PTFE over a wide frequency range and low loss makes AD Series materials ideal for a variety of microwave and R/F applications in telecom industry. AD Series laminate materials may be processed with standard PTFE materials. Because there is a relatively higher percentage of fiberglass, thermal expansion is reduced in all directions, improving plated through hole reliability.

Kolon Industries

Kopa® KN333G30

Kolon Industries Kopa® KN333G30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America. Applications of Kopa® KN333G30 include automotive, electrical/electronic applications and engineering/industrial parts. Characteristics includes flame rated, RoHS compliant, chemical resistant and high strength lubricated.

DIC Corporation

DIC.PPS® Z-650

Outline: Z-650 is a glass fiber and mineral filled super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance with improved dimensional stability. Color: Black

Kraton

Kraton™ D1118 E

Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Samyang Corporation

TRIREX® 3025PJ

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025PJ is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Granule type Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025PJ resin grade is designed for compounding Medium viscosity. Transparent colors only.

Kraton

UNI-REZ™ 2633

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

Momentive Performance Materials

Silopren™ LSR 7090