Carpet & Upholstery
585 products found for Carpet & Upholstery in Consumer Goods
Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.
PETOL® Pz 400-5G
Petol PZ 400-5G is a high functional polyether polyol, a general purpose standard polyol for rigid polyurethane foams used in various rigid applications (sandwich panels, appliances, refrigerators, doors) and thermal insulation applied by spray technique.
Huber Engineered Materials
MoldX® P18 is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.
Huber Engineered Materials
MoldX® S45 is engineered to allow higher loadings versus standard alumina trihydrate (ATH) products and offers excellent processing from 180 phr to as high as 240 phr.
Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.
Plasticizer SC DLC-A
Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.
PETOL 48-3 MB is a heteropolymer triol, with nominal molecular weight of 3500 designed for the manufacture of conventional flexible slabstock polyurethane foams. PETOL 48-3 MB can be used with or without auxiliary blowing agent to produce a wide range of foam grades, ranging from low to high density. It is a BHT-free product that can be processed on all new standard slabstock machinery.
The use levels of EVERSTAB-FS042 range between 0.05% and 0.15% are recommended for protection. It depends on the substrate and performance requirements of the final application.
Domamid® 66H1 is polyamide 66, heat stabilized, is used for injection molding.
PETOL® Pz 360-4G
PETOL PZ 360-4G is a medium functional polyether-polyol with low viscosity. PETOL PZ 360-4G is used especially in polyol blends with high water levels for rigid polyurethane foam applications (wood imitation, conventional insulation applications).
ALFACELL® is the perfect film former and water soluble cellulosic polymer. In addition to utilization in adhesion of wall papers, this product is used in carpet underlay, ceramic mortar, filler for wood parquet, and preparing putty for satin paint. Furthermore, it is used as freeze retardant admixture in gypsum and cement mortars. It is also used for wall papers, and leather and wood adhesion because it is thickener, binder and easily dissolves in water.
Polyols and Polymers
POLYTONE™ AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.
PETOL 120-2 is a high purity polyoxypropylene glycol, with a molecular weight of 1000. PETOL 120-2 is a diol homopolymer and the product is not acidified.
Domamid® 66G33H1 is polyamide 66, 33% glass fiber reinforced, heat stabilized, is used for injection molding.
Sunpar 2280 DLC-A
Sunpar 2280 DLC-A is a paraffinic process oil silicon dioxide blend plasticizer for NR, IR, EPDM, and EPR. Excellent incorporation and easy handling.
Domamid® 66I4 is polyamide 66, impact modified, is used for injection molding.
PETOL 56-3 is a homopolymer triol, with nominal 3000 molecular weight, designed to increase the hardness of flexible foams and to produce CME (Combustion Modified Ether) flexible polyurethane foams. PETOL 56-3 is a BHT-free product that can be processed on various foam machines. PETOL 56-3 can also be used in polyol blends for rigid foams production.
Domamid® 66G40H1 is polyamide 66, 40% glass fiber reinforced, heat stabilized, is used for injection molding.
Aegis® MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.
DENCELL DK Series
DENCELL-DK Series are water soluble cellulose based polymers with perfect viscosifier properties. Besides fine film making, binding and viscosity thickening performance, they can also be used as paper adhesives due to celluosic structures. Additionally, utilization in adhesion of wall paper adhesives, they can be use in carpet underlay, ceramic mortar, filler for wood parquet and also preparing putty for satin paints. Furthermore, they are used as freeze retardant admixture in gypsum and cement mortars. They are also used for leather and wood adhesions due to its thickener, binder and viscosifier characteristics.
Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.
BLS 1622 (65447-77-0)is a high molecular weight hindered amine light stabilizer. BLS 1622 has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. Secondary effects as an antioxidant are realized in the long-term heat stability of polyolefin systems. Areas of application include polyethylene, polypropylene, unsaturated polyester, styrenics, acrylics and vinyl polymers.
Domamid® 66IK4UV1 is polyamide 66, low temperature impact modified, UV1 stabilized, is used for injection molding.
PETOL® Pa 500-5D
Petol PA 500-5D is a highly reactive aliphatic amine polyether polyol, used in blending with other polyols for the production of rigid polyurethane foams for thermal insulation applied by spraying technique (roofs, floors, ceilings) or by molding technique (refrigerators, freezers, panels). Petol PA 500-5D has an auto-catalytic activity and thus reduces the catalyst requirements. It has a good compatibility with alkanes (n-pentane, cyclopentane) and also with HCFC.
HOMOPOLYMER POLYPROPYLENE (PP) FY3011E
HOMOPOLYMER POLYPROPYLENE (PP) FY3011E is a polypropylene homopolymer intended for yarn extrusion characterized by ease of processing and low heat shrinkage. Yarn made from this resin exhibit excellent mechanical property.
Domamid® 66M40 is polyamide 66, 40% mineral filler, is used for injection molding.
TATREN HT 25 11
TATREN HT 25 11 is a controlled rheology homopolymer of very narrow molecular weight distribution. Consistent processability, good color and thermal stability, very low volatiles and low smoke make this grade suitable to be used for very demanding fiber applications. This grade contains anti gas fading additive package.
PETOL® Ps 400-4G
Petol PS 400-4G is a medium functional polyether polyol obtained by propoxilation of glycerin -sorbite mixture under catalyst conditions.
Domamid® 66 is polyamide 66, is used for injection molding.
Huber Engineered Materials
MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).
Econamid® FL 66I2
Econamid® FL 66I2 is polyamide 66, impact modified, is used for injection molding.
PETOL 250-2 is a high purity polyoxypropylene glycol, 400 molecular weight. PETOL 250-2 is a diol homopolymer and the product is not acidified.
Petrolatum T DLC-A
Petrolatum T DLC-A is a blend of petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum T DLC-A incorporates rapidly and aids in filler dispersion.
Domamid® 66IK4 is polyamide 66, low temperature impact modified, is used for injection molding.
BLS 234 (70321-86-7)is a low volatile, benzotriazole type, ultraviolet light absorber (UVA), which is highly effective for polymers being processed at high temperatures. BLS 234 is especially suited for polycarbonates and polyesters. It protects the polymers from UV radiation helping to preserve the original appearance and physical integrity.