products in Carpet & Upholstery

Wacker Chemie AG

VINNAPAS® CA 55

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

Wacker Chemie AG

VINNAPAS® EP 706

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

Wacker Chemie AG

VINNAPAS® EAF 68

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

Wacker Chemie AG

VINNAPAS® CA 5310

VINNAPAS® CA 5310 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a softer hand is required. The dispersion has a moderately high solid content that also permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5310 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

Wacker Chemie AG

VINNAPAS® EP 705K (ULS)

VINNAPAS® EP 705K (ULS) is a vinyl acetate-ethylene copolymer that is protected with PVOH. It has a moderate viscosity and is produced without the use of formaldehyde donors. The polymer's backbone provides the dried adhesive film with toughness and flexibility, which remain even when exposed to water immersion and temperature fluctuations.

Wacker Chemie AG

VINNAPAS® CA 5566

VINNAPAS® CA 5566 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. VINNAPAS® CA 5566 combines a very high solids content with a low viscosity—a combination that permits the addition of very high filler loadings, such as calcium carbonate, aluminum trihydrate (ATH), or other fillers. This results in adhesive formulations with high solid contents of 80 percent or even greater.

Wacker Chemie AG

VINNAPAS® EP 701K

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

Wacker Chemie AG

VINNAPAS® CA 5544

VINNAPAS® CA 5544 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines a very high solid content with a low viscosity, allowing the addition of very high filler loadings, resulting in adhesive formulations with solid contents of 80 percent or even greater. VINNAPAS® CA 5544 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

Wacker Chemie AG

VINNAPAS® 418

VINNAPAS® 418 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a soft hand is required. The dispersion combines moderately high solid content with a low viscosity, a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents.

Wacker Chemie AG

VINNAPAS® EAF 67

VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 67 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 67 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 67 may additionally be used as an adhesion promoter in adhesive formulations.

Wacker Chemie AG

VINNAPAS® EP 758

VINNAPAS® EP 758 is a high-viscosity, high-solid vinyl acetate-ethylene copolymer dispersion with low levels of formaldehyde and free VAM residue. It offers excellent machinability and strong wet tack. VINNAPAS® EP 758 demonstrates chemical stability at both high and low pH levels. It is also compatible with various resins, solvents, plasticizers, and other modifiers, as well as other VINNAPAS® EP dispersions.

Wacker Chemie AG

VINNAPAS® EP 706K (NJG)

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

AdvanSix

Aegis® PIR-H55ZIE

Aegis® PIR-H55ZIE resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZIE, its standard, non-recycled counterpart. Aegis® PIR-H55ZIE is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications, including carpet fiber (natural and SDN) and industrial textiles.

AdvanSix

Aegis® PIR-H55ZI

Aegis® PIR-H55ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZI, its standard, non-recycled counterpart. Aegis® PIR-H55ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monfilament and multifilament applications as well as carpet fiber.

AdvanSix

Aegis® PIR-MBM

Aegis® PIR-MBM resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® MBM, its standard, non-recycled counterpart.Aegis® PIR-MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

AdvanSix

Aegis® H55ZP

Aegis® H55ZP is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications as well as carpet fiber.

AdvanSix

Aegis® H55QP Nylon 6 Homopolymer

Aegis® H55QP is a medium viscosity, lubricated, nylon 6 homopolymer well-suited for general extrusion and extrusion coating.

AdvanSix

Aegis® PIR-H55ZP

Aegis® PIR-H55ZP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZP, its standard, non-recycled counterpart. Aegis® PIR-H55ZP is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monofilament and multifilament applications as well as carpet fiber.

AdvanSix

Aegis® H55ZIE

Aegis® H55ZIE resin is a 2.7 RV, unterminated, medium viscosity homopolymer for monofilament, multifilament and compounding applications.

Wacker Chemie AG

VINNAPAS® EP 706K (ULS)

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

Gelest Inc.

Biosafe® HM4001

Biosafe® HM4001 is a silicon-based antimicrobial available as a 0.75% aqueous solution. It is specifically formulated for use in water-based surface treatments and coatings. This product effectively acts as an antimicrobial agent and is registered with the EPA under the number 83019-2

Scott Bader

Texipol 63-201

Texipol 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer. It is a high efficiency thickener used for carpet backing compounds with long flow character.

Dar-Tech Inc.

Portaflame® SG 10

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 100

Portaflame® SG 100 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 30 LV

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Dar-Tech Inc.

Portaflame® SG10 LV-01

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 100 LV

Portaflame® SG 100 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). This range of Portaflame® SG -LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels in different polymer systems. It is used in aluminum sandwich panels to make them flame retardant.

Dar-Tech Inc.

Portaflame® SG 200

Portaflame® SG 200 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 63

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 35

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 55

Portaflame® SG 55 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG10 LV-02

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 50

Portaflame® SG 50 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 20

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

DeCAL 1015

DeCAL 1015 is an acrylic copolymer emulsion in water. The polymer provides effective rheology modification, particularly suitable for the application of machine-coated adhesives and latex compounds. DeCAL 1015 offers easy viscosity control, enhanced stability with filled systems, and excellent machine runnability properties.

Dar-Tech Inc.

Portaflame® SG 10 LV

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.