products in Cold-Chain & Insulation

SABIC's Specialties Business

LEXAN™ Copolymer EXL9330

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business

NORYL™ Resin N1150

SABIC's Specialties Business NORYL™ N1150 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm. NORYL™ N1150 resin offers heat resistance, good impact resistance, low specific gravity, and dimensional stability. It is an excellent candidate for a variety of automotive instrument panel applications.

SABIC's Specialties Business

NORYL™ Resin SE1GFN1

SABIC's Specialties Business NORYL™ SE1GFN1 resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI 110C. NORYL™ SE1GFN1 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for appliance internals, indoor and outdoor electrical enclosures / housings / connectors.

Sasol

MARLOWET M 68 VG

MARLOWET M 68 VG is a Oil Soluble PAG with low pour point, high VI, excellent thermal oxidative stability. It has good elastomer compatibility and can be mixed with mineral and synthetic base oil.

Sasol

MARLOWET M 46 VG

MARLOWET M 46 VG is an oil soluble PAG with a low pour point, high VI, and excellent thermal oxidative stability. It can be mixed with mineral and synthetic base oil.

Sasol

MARLOWET M 32 VG

MARLOWET M 32 VG is a Oil Soluble PAG with low pour point, high VI, excellent thermal oxidative stability. It has good elastomer compatibility and can be mixed with mineral and synthetic base oil.

Sasol

MARLOWET M 320 VG

MARLOWET M 320 VG is a Oil Soluble PAG with low pour point, high VI, excellent thermal oxidative stability. It has good elastomer compatibility and can be mixed with mineral and synthetic base oil.

Cepsa Chemicals

DetALP® 360

DetALP® 360 is a heavy alkylate (HAB) primarily composed of aromatic oils derived from dialkylbenzenes, resulting as a by-product of linear alkylbenzene (LAB) production. This versatile substance finds utility as a lubricant for air conditioning compressors, heat transfer oil, dielectric fluids for transformer cooling, lubricating greases, an additive in diesel engine oils, a sulfonated additive with surfactant properties for enhancing oil recovery, and as a base for synthetic lubricants suitable for industrial use at lower temperatures. It also serves as a solvent for various applications, including tar, inks, metal surface treatment products, and plastic materials.

SABIC's Specialties Business

ULTEM™ Resin 2220

SABIC's Specialties Business ULTEM™ Resin 2220 is a high-flow resin with a 20% glass fiber reinforcement made from polyetherimide. This material is RoHS compliant and inherently flame retardant, without the need for any flame retardant additives, and offers a UL94 V0 rating at over 0.5 mm. It provides excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This opaque material can be custom colored, and SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which can be identified by differentiated color nomenclature.

Interspersal, Inc

SperseStab™ 1081

SperseStab™ 1081 is a highly effective and low-volatility solid amine-class antioxidant ideal for a variety of rubber polymers, olefins, α-olefins, and lubricant applications. SperseStab-1081 is well-suited for neoprene, EPDM, and nitrile rubbers. It is also used in lubricants, including greases, compressor oils, turbine oils, and hydraulic fluids. SperseStab™ 1081 may be used alone or in combination with other antioxidants, including phenolics and phosphites.

Sanyo Chemical America Incorporated

NEWPOL 50HB-660

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

King Industries

NA-LUBE® KR-023

NA-LUBE® KR-023 is a unique additive & base oil modifier offering excellent hydrolytic and thermo-oxidative stability. It is recommended for high temperature and extreme low volatility applications.

King Industries

NA-LUBE® KR-019

NA-LUBE® KR-019 is a unique additive & base oil modifier offering excellent hydrolytic and thermo-oxidative stability. It is recommended for higher temperature applications where low volatility is critical.

Sanyo Chemical America Incorporated

NEWPOL LB-385

NEWPOL LB-385 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

Sanyo Chemical America Incorporated

NEWPOL LB-3000

NEWPOL LB-3000 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

Sanyo Chemical America Incorporated

NEWPOL LB-285

NEWPOL LB-285 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

Sanyo Chemical America Incorporated

NEWPOL LB-625

NEWPOL LB-625 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

Sanyo Chemical America Incorporated

NEWPOL 50HB-260

NEWPOL 50HB-260 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

Sanyo Chemical America Incorporated

NEWPOL LB-400XY

NEWPOL LB-400XY is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

Sanyo Chemical America Incorporated

NEWPOL LB-1800X

NEWPOL LB-1800X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

Sanyo Chemical America Incorporated

NEWPOL LB-650X

NEWPOL LB-650X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

Premier Building Solutions

XtraBond® 1500NS - Non Skinning Premium Grade Butyl Sealant

Calumet

CalEster™ TS

CalEster™ TS is suitable for a broad range of lubricant applications where a wide operating temperature capability is desired including turbine oils, gear oils, engine oils, air compressor oils, and hydraulic fluids. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

Pluss Advanced Technologies Pvt Ltd

savE® OM42

savE® OM42 is an inorganic phase change material.

Pluss Advanced Technologies Pvt Ltd

savE® HS36

savE® HS36 is an inorganic phase change material.

Calumet

CalEster™ HT 68

CalEster™ HT 68 is suitable for a broad range of lubricant applications where a combination of higher viscosity and a higher temperature capability are desired including high temperature chain lubricants, high temperature grease, refrigeration lubricants, gear oils, and air compressor oils. Exceptional high temperature stability and cleanliness can be achieved when utilizing the CalEster™ HT line of products and viscosity grades. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

King Industries

NA-SUL® DTA

NA-SUL® DTA is a stable, ashless, oil soluble, water insoluble rust and corrosion inhibitor displaying good demulsibility.

Calumet

CalEster™ A

CalEster™ A is a low viscosity, highly stable polyol ester made from pentaerythritol and saturated fatty acids. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

Ele Corporation

PEL-RIG™ 1360

PEL-RIG™ 1360 phosphate polyol halogen free fire retardant is a phosphoric acid propylene oxide reaction product. PEL-RIG™ 1360 is used in polyisocyanurate (PIR) and other rigid and semi-rigid foams as a replacement for tris(1-chloro-2-propyl) phosphate (TCPP) and other halogenated fire retardants. PEL-RIG™ 1360 is a trifunctional crosslinker in polyurethane foam.

Calumet

CalEster™ HV

CalEster™ HV is suitable for a broad range of lubricant applications where a combination of higher viscosity and a wide operating temperature capability are desired including grease, chain lubricants, gear oils, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

Ele Corporation

PEL-CAT™ 9648

PEL-CAT™ 9648 is Effective trimerization catalysts for rigid and semi-flex foams; high rate of trimer formation improves flammability properties and compressive strength. PEL-CAT 9648 has a high level of potassium in ethylene glycol solvent and is the most water compatible.

Ele Corporation

PEL-SIL™ 9868

PEL-SIL™ 9868 is a silicone surfactant that is polyol compatible and especially designed for compatibility with pentane. It is useful in appliance insulation formulations and laminated continuous rigid board foam. PEL-SIL™ 9868 is designed to maximize the k-factor in initial and long term aging in pentane blown foam. With the above blowing agent it will produce foam with excellent flow characteristics, a high percent of closed cells and improved compressive properties.

King Industries

NA-LUBE® AO-242

NA-LUBE® AO-242 is an ashless liquid phenolic high temperature antioxidant for petroleum and synthetic based automotive and industrial lubricants and greases.

Pluss Advanced Technologies Pvt Ltd

savE® HS30N

savE® HS30N is an inorganic phase change material.

Ele Corporation

PEL-CAT™ 9715

PEL-CAT™ 9715 Slightly delayed action catalyst for better flowability in rigid foam applications; moderately high trimer formation rate minimzes knit lines and improves foam strength and uniformity without sacrificing processing time.

Ele Corporation

PEL-SIL™ 1315

PEL-SIL™ 1315 is an efficient isocyanate or polyol compatible, liquid surfactant especially designed for isocyanurate applications. In isocyanurate formulations, it will produce foam with excellent flowability under a variety of foaming conditions. Other applications include foam for low density appliances. Flame retardant transportation and construction foams, and high density water blown formulations. A good starting point would be 0.5 to 0.9% of PEL-SIL™ 1315 on the total weight of the reactants.