Products in Consumer Goods: Good Thermal Stability

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

ELASTOSIL® R Plus 4050/55 MH 9005 is an addition-cure, one-component high consistency silicone rubber specifically designed for the manufacture of molded articles. The vulcanizates of this silicone rubber exhibit excellent heat stability. ELASTOSIL® R Plus 4050/55 MH 9005 is suitable for various household applications.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

ELASTOSIL® R Plus 4050/55 is a two-component high consistency silicone rubber for the manufacture of molded articles. It is an addition cure system that offers excellent heat stability. This product finds applications in various household applications, including addition curing, food-contact, heat resistance, high rebound resilience, and ultra-low compression set.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

Flyadd® AY3 is a liquid-type blend anti-yellowing agent that can inhibit the yellowing of the polyurethane caused by high-temperature processing. It has excellent ultraviolet absorption performance, which can effectively improve the weatherability of the product and inhibit the yellowing caused by thermal oxygen and ultraviolet light.

VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

VESTAMID® MLT 8000 is a proven 3-layer system for thermal management systems in the automotive industry. It consists of an outer layer of VESTAMID® polyamide 12 and a special polypropylene inner layer. The product offers high hydrolysis resistance against coolant liquids and urea solutions, good cold impact performance, and significant weight savings compared to less innovative concepts such as metal or rubber hoses.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

KyronMAX® S-4230 is a high-performance polymer that combines the excellent strength, stiffness and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SABIC's Specialties Business LEXAN ML6413 resin is an impact modified, flame retardant polycarbonate grade with Br- & Cl-free FR systems. It features improved light shielding capability with good flow, impact and thermal properties suitable for various applications.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

Flyadd® AY20 is a liquid-type compounded anti-yellowing agent that can increase the thermal resistance and anti-aging properties of PU products. This highly efficient product has excellent anti-thermal oxygen and ultraviolet absorption functions and can effectively inhibit the yellowing caused by high-temperature processing or ultraviolet light.

Flyadd® AY2 is a highly efficient liquid-type compounded anti-yellowing agent, which can effectively absorb 240 - 330 nm UV light. It has better resistance to yellowing when compared to the traditional benzophenone type or benzotriazole type UV Absorber. It is widely used in polyurethane foam material for shoes, insoles foam, adhesives for shoes, and other materials. This product is particularly suitable for outdoor use.

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

CONSTAB ST 03003 LD is a synergistic combination of antioxidants, improvement of the processing and long-term heat stabilization; rework of trimmings and other film scrap (recycling), and stabilization of the polymers in terms of the shut-down of the extrusion process. Start, stop, and process stabilizer, prolonged processing heat Very suitable when regrind is used. Polyethylene based.

CONSTAB UV 01370 PP offers a diverse range of high-performance uv-light stabilizers designed to meet extreme demands, including a 20% hals uv-light stabilizer for exceptional uv protection in outdoor environments and a hindered amine light stabilizer specifically formulated for thin films, demanding industrial outdoor applications, and colored films. These stabilizers provide: superior light and thermal stability high extraction resistance low volatility excellent process performance high melt flow stability improving color retention for enhanced product longevity.

CONSTAB UV 01022 PP is composed of 20% HALS stabilizer, delivering commendable light and thermal stability with minimal volatility. This UV protector product is well-suited for polypropylene (PP), providing heightened stability for diverse applications. It falls within the product families of additive masterbatches, antioxidants, and stabilisers.