Products in Consumer Goods: Lubricant (Internal)

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

H-Sil® SDF 60,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 1000 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 12,500 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® SDF 350 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

MOCOM Compounds ALPERFORM® PE SL FC 0205-14 EA is a base polymer consisting of polyethylene low density with a filler/additive system of 2% lubricant. It has a minimum shelf life of 6 months and is dosage dependent on application and operational area, with 5% extrusion and 5% injection molding. It has special features including a slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in polyethylene low density, polyethylene linear low density, polyethylene high density, ethylene acrylic acid copolymer, polypropylene, and polypropylene copolymer.

MOCOM Compounds ALPERFORM® TPU EH A 950-3880 is a Thermoplastic Urethan Elastomer with a dosage of 5% for extrusion and 5% for injection molding, depending on the application and operational area. It contains a lubricant and a release agent, is free from cadmium, lead and diarylide pigments, has high dispersibility, and a high additive content. It is used in the automotive, machinery, building and construction, and sport and leisure industries for injection molded parts and extruded parts.

MOCOM Compounds ALPERFORM® PE SL FC 0207-14 OA is a base polymer of polyethylene low density with a filler/additive system of 2% lubricant. It has special features of slip agent, migration towards the surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for injection molding with a melt temperature of 180-240°C and a mold temperature of 20-40°C, as well as extrusion dependent on the application and operational area. It is recommended for use in the food processing industry, household goods, packaging, and other injection molded, extruded, and blow molded parts.

MOCOM Compounds ALPERFORM® PC SL 0229-16 is a polycarbonate base polymer with a dosage of 2.0-3.0% for extrusion and injection molding, depending on the application and operational area. This product contains a lubricant and release agent as a filler/additive system, and has the special feature of slip agent, easy release (demolding), and migration towards the surface. It is intended for use in the automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure market segments for injection molded parts and extruded parts.

MOCOM Compounds ALPERFORM® POM SL 0268-19 is a Polyoxymethylene Copolymer with a dosage of 1.0-2.0% for extrusion and 1.0-2.0% for injection molding, depending on the application and operational area. It has a natural color, is free from cadmium, lead, and diarylide pigments, is dust-free, and has a high dispersibility and additive content. It is intended for use in the electrical and electronic, furniture, building and construction, and sport and leisure market segments, and can be used for injection molded parts, blow molded parts, and extruded parts. For optimal use, it should be stored in a dry place, protected from light.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

ST-PA9 is an innovative lubricant for polyamide applications. ST-PA9 additive is excellent at increasing melt flow index, improving dispersion, compatibility & elongation and increasing load content. Customers have observed a 170% increase in MFI.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

ST-PA210 is essential flow improver for biobased and biodegradable plastics. Recently also approved for use with polycarbonate copolymers! Utilizing low dosings, the ST-PA210 additive is uniquely suited for increasing melt flow index, compatibility & elongation, and improving dispersion in the emerging world of bioplastics. Our customers report verified performance enhancement with no waxy residues.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

ChemPlasa Materials L-206F is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

Hebei Jingu Plasticizer Plasticizer for Plastic Track is nontoxic and eco friendly plasticizer and has raw material in plant oil.

Sunlube S-10 is in powder form and chemically known as Sodium Stearate.

Sunlube BA-10 is in powder form and chemically known as Barium Stearate.