Products in Consumer Goods: Plasticizer

Cytron TBC is a non-toxic plasticizer widely used in PVC and cellulose derivatives. It can be applied in food-contact materials, such as plastic wrap, containers, films, or printing inks. It is a safe alternative to plasticizers in children's toys and medical devices, such as tubing, gloves, bandages, and patches. It can also be used as an emollient for personal care products.

TRIEST DTDP-9011, is an oxoalcohol ester in clear, liquid form that gives the product flexibility and durability to improve the mechanical properties of materials and increase their functionality, showing superior performance characteristics at low temperatures. It's applications lies in several fields like metal working fluids, polymer industry.

TRIEST DPHP-3911, is an oxoalcohol ester in clear, liquid form that gives the product flexibility and durability to improve the mechanical properties of materials and increase their functionality, showing superior performance characteristics at low temperatures. It has applications in many areas like metal working fluids, plastic and polymer industry and also in compressor and engine oils.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced processability, and lower volatility than traditional General-Purpose Plasticizers. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers. Santicizer® Platinum G-2000 has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product label.

BroFlam™ 45Z is a high performance flame retardant plasticizer for PVC, adhesives, coatings and elastomers. Its excellent flame retardant efficiency and good plasticizing properties make it a suitable choice for a variety of applications.

Plasticizer DOTP is an ester of 2-ethylhexanol and terephthalic acid, which is used as a commercial plasticizer with high dielectric properties, high cold resistance, reduced volatility.

Ketjenflex® 2 is a toluene sulfonamide based reactive plasticizer used in Melamine molding compounds and a brightener in metal plating formulas. Ketjenflex® 2 is a basic starting material in the preparation of melamine formaldehyde molding compounds. Reacted into the resin backbone KETJENFLEX® 2 imparts long term impact resistance and toughness. Ketjenflex® 2 can also be used in other thermoset resins like epoxy and polyurethane based polymers resins.

Di-isononylphthalate (DINP) is a phthalate used as a plasticizer with the formula c26H4204. It is usually used in a huge diversity of plastic items.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

Santicizer® 261A is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer is a C7-C9 alkyl benzyl phthalate that has compatibility in many polymer types, particularly in PVC.

Santicizer® 1438 is a modified alkyl aryl phosphate ester for flexible PVC products that must meet stringent flame retardancy standards. Santicizer® 1438 is specially recommended for plastisol applications where lower viscosity is combined with high fire-retardancy of the end product. Santicizer® 1438 exhibits superior flow properties and plasticizer efficiency compared to triaryl phosphate esters at equal concentrations. Santicizer® 1438 can be used at lower concentrations for similar flame spread without affecting tensile properties.

Santicizer® Platinum P-330 is a non-phthalate, primary plasticizer with high performing product characteristics meant to outperform existing general purpose plasticizing alternatives. This plasticizer has some high solvating character to boost compatibility and plasticizing efficiency in multiple polymer systems. This product is highly recommended for PVC application where fast fusing would be a benefit.

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

UPC Group DBP is a clear liquid with high stability and it could be dissolved in most organic solvents. DBP as a plasticizer has good compatibility with PVC and extremely high plasticizing efficiency. By just adding small amounts of DBP, plastic products can easily achieve the desired hardness. Moreover, DBP is a kind of plasticizing accelerator that can reduce the melting temperature of plastics in PVC processing.

PureFlex O1510 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Vatan Plastik San. Tic. AS V150 is a phthalate-free plastifian, which we produce in our chemical factory with the latest technology, has been used by cable, artificial leather, granule, hose, membrane filter and similar PVC manufacturers. The superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Ekflex 1081 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Alkyl Amines Chemicals Diethylamine is a Clear,colorless liquid with strong ammonical odor.

Natrochem DOP DLC-A is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.

Shandong Chuanjun Chemical Diethylene glycol dibenzoate(DEDB)e is a new plasticizer in China. It widely used in PVC products as main plastizer the 1970's abroad. It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China.

Plastay DINP (Di Isononyl Phthalate) is usually used with materials such as PVC for plasticization, after heating to a soft or plasticized state, to obtain elasticity, brightness for plastic, create electrical resistance, prevent cracking and make the surface smooth. Do not allow the ingress of materials that will be removed from the mold.

Polyfill Technologies Elastofill Compound PT-EF05 is plastomeric material based on the specialty polymer blends with the unique characteristics. The product is highly compatible with LD, LLDPE and PP. It enhances the softness, elongation at break, elasticity and impact resistance of the film. Besides it also improves the transparency in the films. It also enhances the thermal bonding strength.

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Shandong Chuanjun Chemical DOS for excellent cold-plasticizers has plasticized high efficiency, low volatile, it has an excellent cold resistance, have better heat resistance, electrical insulation and lightfastness, applicable to PVC, chlorine Ethylene copolymer, Glauber cellulose ester, ethyl cellulose and synthetic rubber, and other resins. Particularly applicable to production of cold wire and cable materials, leather, film, sheet metal, such as sheet. Chang and phthalate esters at the same time. As a variety of low-temperature synthetic rubber used plasticizers, rubber vulcanization of no effect.

Hebei Jingu Plasticizer Plasticizer for Plastic Track is nontoxic and eco friendly plasticizer and has raw material in plant oil.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

WSD Chemical Dibutyl phthalate/DBP Super Grade used for main plasticizer for cellulosic resins and polyvinyl chloride, good solvent potency and good compatibility, fine softening property, but less aging-duration and anti-wanter-extraction.DBP plasticizer also used as plasticizer for polyvinyl acetate, alkyd resins, ethyl cellulose and rubbers.

Mediaplast PX-2 is a semi-synthetic plasticizer based on long-chain hydrocarbons with paraffinic character. It is recommended to use in elastomers with low polarity, e. g. NR, IIR, BR, SBR and EPDM.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

EKFLEX 983 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

Idesa Petroquímica Dioctyl Phthalate is virtually colorless, oily liquid, insoluble in water, miscible with mineral oils.

PureFlex E1540 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.