Products in Consumer Goods: Processing Aid

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

CONSTAB PA 00852 PP is good for improved processibility, torque reduction, and gauge control. Reduces die buildup and extruder pressure, especially at very high melt temperatures up to 310 °C. Processing aids prevent die buildup and give a smoother, more glossy surface. high-temperature resistant polymer processing aid; improved melt flow; less desposites in the melt system and die capilaries; improved gloss.

TRIEST TTM-0811, is a clear trimellitate ester that imparts flexibility, durability and stability to the product to improve the mechanical properties of materials and increase their functionality. It has applications in many areas like plastic industry, grease and chain oils and in compressor and turbine oils.

TRIEST TTM-1211, is a clear trimellitate ester that imparts flexibility, durability and stability to the product to improve the mechanical properties of materials and increase their functionality. It has applications in many areas like plastic industry, compressor and turbine oils and also in grease and chain oils.

TRIEST TTM-3211, is a clear trimellitate ester with high oxidation resistance and viscosity, which imparts flexibility, durability and thermal stability to the product to improve the mechanical properties of materials and increase their functionality. It has applications in many areas like plastic industry, grease and chain oils and also in compressor and turbine oils.

Pepton® 44T Prills is a dust free, prill form peptiser which offers handling and environmental improvements over conventional powdered peptisers.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

Pepton® 22 is a peptiser for use in the high-temperature mastication of natural and synthetic rubbers.

Masterbatch PRZ PA708 is a process aid masterbatch designed to improve the melt processing of host polymers. They may also improve esthetic properties of finished articles by removing flow marks and die lines.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers a superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

Mosselman Castor Oil Hydrogenated (8001-78-3) is a white, odorless fat obtained by the hydrogenation of castor oil. It has very good compatibility with natural waxes. It is mostly used in the manufacture of calcium and lithium lubricating greases. These lubricating greases exhibit excellent resistance to oils and fats, water and solvents. It is also used as raw materi-al for solvent based coating systems, for alkyd resins and as processing aid for phenolic resins, poly-ethylene, PVC and rubber and as an additive in powder coatings. It is also of importance concerning the production of hot melts like paper additives. Finally it can be used as an ingredient in polishes (for cars, shoes, furniture) and in cosmetics (for creams, lipsticks,…).

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

K - STOFF 440 is an oleochemical wetting & dispersing additive that offers excellent wetting characteristics and does not allow to form of the agglomerates of pigments particles in color MB application.