Consumer Goods

DuPont

Delrin® 150 NC010

Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.

DIC Corporation

DIC.PPS® Z-230

Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

AdvanSix

Aegis® H100ZP

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

DuPont

Delrin® SC698 NC010

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.

DuPont

Delrin® 111PA NC010

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

DuPont

Delrin® FG911DP NC010

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

DuPont

Delrin® FG500MXD BLA090

Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.

Carbon Inc.

CarbonResin™ RPU 61

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

DuPont

Delrin® 500MT NC010

Delrin® 500MT NC010 is a Medium Toughened, Toughened, Medium Viscosity Acetal Homopolymer.

DuPont

Delrin® 500CPE NC010

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 500CPE (DE20729) is a medium viscosity acetal homopolymer with very low VOC emissions for applications in automotive interiors. It provides good mechanical performances with improved processing, thermal stability and productivity for injection molding.

DuPont

Delrin® FG111DP NC010

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

DuPont

Delrin® 300CPE NC010

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 300CPE (DE20732) is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® 300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.

DuPont

Delrin® FG100 NC010

Delrin® FG100 NC010 is a High Viscosity Acetal Homopolymer.

DuPont

Delrin® 311DP NC010

Delrin® 311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.

Sasol

Sasol Monoisopropanolamine

Monoisopropanolamine (MIPA) with a purity of 99% is an Monoisopryl Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Elastocon TPE Technologies

Elastocon® 2880L

Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene.Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.

DuPont

Delrin® 510GR NC000

Delrin® 510GR is a 10% glass-reinforced acetal homopolymer for injection molding. It has high strength, stiffness, and high deflection temperature and excellent creep resistance.

DIC Corporation

DIC.PPS® Z-240

Outline: Z-240 is a 40% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

Momentive Performance Materials

Tufel™ III 92506

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Nilit

Nilamid® A3 GF30 TF15

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Elastocon TPE Technologies

Elastocon® CLR30

Elastocon® CLR30 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR30 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability.Elastocon® CLR30 is supplied as ready to use pellets in 40 lb. quantities.

Carbon Inc.

CarbonResin™ RPU 70

CarbonResin™ RPU 70 is a tough, heat resistant material that is a good choice for parts requiring strength, toughness, and moderate heat resistance. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS. RPU 70 has a UL 94 HB flame resistance classification.

Versalis - A subsidiary of Eni S.p.A

Edistir® N 3840

Edistir® N 3840 is a general purpose polystyrene combining easy flow and medium heat. N 3840 belongs to Edistir® GPPS third generation.Edistir® N 3840 is suggested in extrusion for glossy capping of HIPS sheets and for blending with HIPS or clear SBS for stiffer thermoformable sheets.This grade exhibits excellent processability in injection molding and it is recommended for complex and thin-wall parts and fast molding cycles.Thanks to N 3840, injected items will be more brilliant and neutral colored in line with more sophisticated market needs.Designation: Thermoplastics ISO 1622-PS,G,085-12.Thermoformed disposable packaging and glossy sheets for industrial and fridge applications.Injection of molded beverage cups, containers for foods and cosmetics, toys, housewares, medical articles (Petri dishes).

Elastocon TPE Technologies

Elastocon® STK56PA

Elastocon® STK56PA a colorable thermoplastic elastomer that has been developed for applications that require soft rubber-like properties and a good surface finish. Elastocon® STK56PA is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK56PA can be overmolded to polyamide/nylon.Elastocon® STK56PA is supplied as ready to use pellets in 50 lb. bag quantities.

DIC Corporation

DIC.PPS® Z-200-E5

Outline: Z-200-E5 is an un-filled super tough PPS compound with excellent flexibility and toughness compared to FZ-2100. Color: Gray

Teijin Limited

Panlite® G-3320M

Glass fiber reinforced grades-20% Glass fiber, Isotropy grade

Pinnacle Polymers

Pinnacle™ PP 4220H

20 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4220H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Provides an excellent base stock for compounding of filled and reinforced grades.The 4220H product provides: High impact and melt flow Superior balance of stiffness and impact strength Excellent color and processing stability UL Listed It is characterized by its easy mold flow and high impact at both room and sub-ambient conditions.Pinnacle's 4220H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

Kolon Industries

Kopa® KN133G30

Kolon Industries Kopa® KN133G30 is a Polyamide 6 (PA 6) polymer which is reinforced with glass fiber that contains lubricant (unspecified) . It is processed by using injection molding applictions.

Prime Polymers

Prime Polypro™ J106G

Prime Polymers Prime Polypro™ J106G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ J106G include household applications and industrial applications.Characteristics include: Homopolymer Rigid

AdvanSix

Aegis® H55ZI

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

DuPont

Delrin® 100KM NC000

Delrin® 100KM NC000 is a high viscosity acetal homopolymer with Kevlar® aramid resin. It is designed for applications requiring low wear in abrasive environments.

Sylvin Technologies

Sylvin™ 9734-73 Black

Sylvin™ 9734-73 Black is a vinyl compound formulated for injection molding applications that require good mold release.

DIC Corporation

DIC.PPS® Z-650

Outline: Z-650 is a glass fiber and mineral filled super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance with improved dimensional stability. Color: Black

Nilit

Nilamid® B3 W GB30

Nilit NILAMID® B3 W GB30 is a Polyamide 6 (Nylon 6) compound, 30% glass bead reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Prime Polymers

Prime Polypro™ J105G

Prime Polymers Prime Polypro™ J105G is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Prime Polypro™ J105G include household applications and industrial applications.Characteristics include: Homopolymer Rigid

Precision Polymer Engineering

Perlast® G76W

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers