products in Consumer Goods: Industrial Applications

DOMO Chemicals

Domamid® 66H1

Domamid® 66H1 is polyamide 66, heat stabilized, is used for injection molding.

Nilit

Nilamid® A3 GB30

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

BARLOG plastics GmbH

Kebater® PBT B512A

PBT unreinforced, flame retardant

Sylvin Technologies

Sylvin™ 6071-80 NATURAL

Sylvin™ 6071-80 Natural is a vinyl / nitrile rubber blend formulated for injection molding or extrusion applications that require enhanced low temperature properties.

Teijin Limited

Panlite® GN-3610Z

Glass fiber reinforced grades - 10% Glass fiber, Flame resistant grade, Non-bromine/non-phosphor type, Weather resistant

AdvanSix

Aegis® H35ZI

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Teijin Limited

Panlite® GN-3610L

Glass fiber reinforced grades - 10% Glass fiber, Flame resistant grade, Non-bromine/non-phosphor type

Nilit

Nilamid® A3 W GF55

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Sylvin Technologies

Sylvin™ 86043-66 Clear

Sylvin™ 86043-66 Clear is a vinyl compound formulated with a citrate plasticizer for extrusion applications that require PROP 65 and reach compliance.

BARLOG plastics GmbH

Kebater® PBT A9045

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

Aliancys

Palatal® P4-01

Esenttia

ESENTTIA® 16C12NA

BARLOG plastics GmbH

Kebablend® / H 27.1200 PBT FE 161105

KEBABLEND / H 27.1200 PBT is a functional compound based on PBT with high density.

DOMO Chemicals

Domolen® PPCG20 BK

Domolen® PPCG20 BK is a polypropylene copolymer, 20% glass fiber reinforced, for injection molding and has black appearance.

Sylvin Technologies

Sylvin™ 9600-85 Clear

Sylvin™ 9600-85 Clear is a vinyl compound formulated for clear molding applications.

Esenttia

ESENTTIA® 05H82-AV

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation to high speed and low water carry-over. Recommended for: Raffia Tapes for woven fabrics in high speed line where needs high tenacity and strength, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

DOMO Chemicals

Domamid® 66I4

Domamid® 66I4 is polyamide 66, impact modified, is used for injection molding.

Aliancys

Palatal® A400-01FC

Esenttia

ESENTTIA® 03H82

Characteristics: Homopolymer polypropylene with high cleanness and stable processability, excellent gage control, easy stretching and orientation, low water carry-over. Recommended for: Raffia Tapes for woven fabrics where high tenacity and strength are required, ropes, cords, industrial bags, carpet backing, big bags, general purpose extrusion and injection molding applications.

Nilit

Nilamid® A3 H CF20

Nilit NILAMID® A3 H CF20 is a Polyamide 66 (Nylon 66) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

DOMO Chemicals

Domamid® 66G40H1

Domamid® 66G40H1 is polyamide 66, 40% glass fiber reinforced, heat stabilized, is used for injection molding.

Teijin Limited

Panlite® GN-3620L

Glass fiber reinforced grades - 20% Glass fiber, Flame resistant grade, Non-bromine/non-phosphor type

DOMO Chemicals

Domamid® 66G33H1

Domamid® 66G33H1 is polyamide 66, 33% glass fiber reinforced, heat stabilized, is used for injection molding.

Nilit

Nilamid® A3 MGF2010

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Elastocon TPE Technologies

Elastocon® 8068L

Elastocon® 8068L is a colorable lubricated thermoplastic elastomer formulated for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 8068L is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068L can be overmolded to polypropylene.Elastocon® 8068L is supplied as ready to use pellets in 1000 lb. quantities.

Aliancys

Synolite™ 8388-L-7

Braskem America

Braskem America TI6350WV

Braskem TI6350WV Polypropylene Impact Copolymer (ICP) is a nucleating and antistatic agent with superior low temperature impact, nucleated and antistatic. Applications and suggested users include furniture, toys and compounding.

Braskem America

Braskem America TI4020N

Braskem TI4020N Polypropylene Impact Copolymer (ICP) provides extra high Izod impact, excellent low temperature drop impact, and good organoleptic properties. Product is nucleated.

Braskem America

Braskem America KN-501

Braskem KN-501 is a polypropylene impact copolymer (ICP) with excellent color and processing stability, excellent long term heat aging properties, and wet/dry environment resistance.

AdvanSix

Aegis® H8202NL

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

AdvanSix

Aegis® MBM

Aegis® MBM resin is a terminated, non-delustered, bright, medium dye, medium viscosity nylon 6 resin for carpet fiber and synthetic turf extrusion applications.

Sasol

Sasol MDIPA

MDIPA is an Isopropanol Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Xenia

XECARB® 11-C20-HP

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

Osterman & Company Inc.

Osterlene® HD0752

Osterman & Company Inc. Osterlene® HD0752 is a high density polyethylene resin and is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress crack resistance and impact strength.Applications for HD0752 include injection molding, for injection molded pails, industrial parts and other shipping containers. This product has excellent impact strength, stress crack resistance and processability. It has a very narrow molecular weight distribution.HD0752 has no slip, antiblock or processing aids.HD0752 complies with U.S. FDA 21 CFR 177.1520 (c)3.1a, Canadian HPFB No Objection, EU, No 10/2011, U.S. USP, U.S. FDA DMF.

Nilit

Nilamid® A3 AL40

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

BARLOG plastics GmbH

Kebablend® / WR 01/2202

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.