products in Consumer Goods: Industrial Applications

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/12

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Polymer Name: Thermoplastic Elastomer (unspecified)

Elastocon TPE Technologies

Elastocon® 8078NL

Processing Methods: Injection Molding, Blow Molding, Extrusion

End Uses: Medical/Healthcare Applications, Tubing, Surgical Instruments

Density: 1020.0 - 1020.0 kg/m³

Tear Strength: 32.39 - 32.39 kN/m

Elastocon® 8078NL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a scratch and mar resistant surface finish. Elastocon® 8078NL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078NL can be overmolded to polypropylene.Elastocon® 8078NL is supplied as ready to use pellets in 1000 lb. quantities.

Polymer Name: Styrene Butadiene Block Copolymer

Dynasol Elastomers

Emulprene™ 1502

Strain at Break: 330.0 - 330.0 %

Synonyms: Tris (4-Nonylphenyl)Phosphite, Tris(P-Nonylphenyl)Phosphite

Emulprene 1502 is a cold styrene – butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant.

Polymer Name: Polyamide 6 (PA 6)

Nilit

Nilamid® B3 GF30 TM2

Additives Included: Lubricant (Unspecified)

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

BARLOG plastics GmbH

Kebablend® / WR 01/2120

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Polymer Name: Polyamide 66 Alloy (PA 66 Alloy)

DOMO Chemicals

Domamid® XS 66G60H1

Density: 1700.0 - 1700.0 kg/m³

Flexural Modulus: 20000.0 - 20000.0 MPa

Domamid® XS 66G60H1 is a polyamide 66 alloy, 60% glass fiber, heat stabilized, is used for injection molding.

Sylvin Technologies

Sylvin™ 4225-80 Black

Processing Methods: Injection Molding, Extrusion

End Uses: Tubing, Industrial Applications, General Purpose

Sylvin Technologies Sylvin™ 4225-80 Black is a vinyl compound formulated per ASTM D2287-96 with a 50502 callout. This compound is suitable for extrusion or injection molding applications.

DOMO Chemicals

Econamid® FL 66I1

Additives Included: Impact Modifier

Econamid® FL 66I1 is polyamide 66, impact modified, is used for injection molding.

Polymer Name: Polycarbonate (PC)

Teijin Limited

Panlite® LS-2250

Flexural Modulus: 2200.0 - 2200.0 MPa

Frictional wear resistant grade

Nilit

Nilamid® A3 J28

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

Nilit

Nilamid® A3 TM2

Additives Included: Lubricant (Unspecified)

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

BARLOG plastics GmbH

Kebablend® / WR 01/1120/2110

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/5

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Polymer Name: Polyamide 6 (PA 6)

Nilit

Nilamid® B3 GF50

Additives Included: Heat Stabilizer

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

DOMO Chemicals

Econamid® FL 66G30

Econamid® FL 66G30 is polyamide 66, 30% glass fiber reinforced, is used for injection molding.

Strain at Break: 270.0 - 270.0 %

BARLOG plastics GmbH

Kebablend® / EC FE 190801 TPE

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

Applications: Chemical & Industrial Manufacturing, Equipment & Parts, Footwear

Chi Mei Corporation

Kibiton® PB-511

Product Families: Styrenic Thermoplastic Elastomers (TPE-S), Thermoplastic Elastomers

Polymer Name: Styrene Butadiene Styrene (SBS)

End Uses: Asphalt Modification, Footwear, Industrial Applications

Polymer Name: Polybutylene Terephthalate (PBT)

BARLOG plastics GmbH

Kebater® PBT B511T

PBT unreinforced, highly impact modified

Nilit

Nilamid® A3 H

Additives Included: Heat Stabilizer

Nilit Nilamid® A3 H is a nilamid® a3 is an unfilled polyamide 66 (nylon 66) compound heat stabilized.This compound is intended for injection molding.Nilamid® a3 is primarily designed for the automotive industry. It is also suitable for electrical and electronic or industrial & consumer applications.

Density: 1140.0 - 1140.0 kg/m³

BARLOG plastics GmbH

Kebablend® / EC FE 190501 TPE

Strain at Break: 600.0 - 600.0 %

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

DOMO Chemicals

Domamid® 66IK4UV1

Additives Included: Impact Modifier, UV Stabilizer

Flexural Modulus: 1700.0 - 1700.0 MPa

Domamid® 66IK4UV1 is polyamide 66, low temperature impact modified, UV1 stabilized, is used for injection molding.

Density: 1250.0 - 1250.0 kg/m³

BARLOG plastics GmbH

Kebaflex® / U D72 ST B.01

Strain at Break: 345.0 - 345.0 %

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

Polymer Name: Methyl Methacrylate Acrylonitrile Butadiene Styrene (MABS)

Toray

Toyolac® TP90-X02

Processing Methods: Extrusion

Toray Toyolac® TP90-X02 is a Methyl Methacrylate / ABS (MABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includess flame rated, antistatic, wear resistant.

Polymer Name: Polycarbonate (PC)

Teijin Limited

Panlite® G-3420R

Additives Included: Mold Release Agent

Flexural Modulus: 5400.0 - 5400.0 MPa

Glass fiber reinforced grades-20% Glass fiber

Polymer Name: Polypropylene (unspecified)

Buckeye Polymers, Inc.

BP RPP™ 3012 C NAT

Fillers Included: Calcium Carbonate

Product Information: Calcium Carbonate Filled PP Grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. Our BP RPP C series product line ranges from 10 - 50% in filler levels. These materials can be customized through the addition of UV packages, custom matching, and processing additivesFeatures: Can be UV Stabilized for Increased Resistance Industrial, Outdoor Furniture, and Window Trim

Sylvin Technologies

Sylvin™ 8808-70D Natural

Processing Methods: Extrusion

End Uses: Tubing, Industrial Applications, General Purpose

Sylvin™ 8808-70D Natural is semi-rigid vinyl compound formulated for extrusion applications.

Sylvin Technologies

Sylvin™ 8203-55 Grey 9540

Additives Included: Plasticizer (Unspecified)

End Uses: Tubing, Industrial Applications, General Purpose

Sylvin™ 8203-55 Gray 9540 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Polymer Name: Thermoplastic Elastomer (unspecified)

Elastocon TPE Technologies

Elastocon® CLR40

Processing Methods: Injection Molding, Blow Molding, Extrusion

End Uses: Medical/Healthcare Applications, Tubing, Surgical Instruments

Density: 900.0 - 900.0 kg/m³

Tear Strength: 25.025 - 25.025 kN/m

Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene.Elastocon® CLR40 is supplied as ready to use pellets in 40 lb. bag quantities.

DOMO Chemicals

Econamid® FL 66I2

Additives Included: Impact Modifier

Econamid® FL 66I2 is polyamide 66, impact modified, is used for injection molding.

Polymer Name: Thermoplastic Elastomer (unspecified)

Elastocon TPE Technologies

Elastocon® 9050

Processing Methods: Blow Molding, Extrusion, Injection Molding

End Uses: Industrial Applications, Consumer Applications

Density: 1040.0 - 1040.0 kg/m³

Tear Strength: 74.9 - 74.9 kN/m

Elastocon® 9050is a natural thermoplastic elastomer formulated for applications that require high impact resistance and a good surface finish. Elastocon® 9050 is well suited for consumer goods and industrial applications requiring U.V. stability. This can be overmolded to polypropylene.

DOMO Chemicals

Domamid® 66I1

Additives Included: Impact Modifier

Flexural Modulus: 2500.0 - 2500.0 MPa

Domamid® 66I1 is polyamide 66, impact modified, is used for injection molding.

Sylvin Technologies

Sylvin™ 8873-92 White 1196

Processing Methods: Extrusion, Coextrusion

End Uses: Tubing, Industrial Applications, General Purpose

Sylvin™ 8873-92 White 1196 is a vinyl compound formulated for coextrusion applications.

BARLOG plastics GmbH

Kebaform® / C 130 H

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH

Kebablend® / WR 01/2110

KEBABLEND / WR 01/2110 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Polymer Name: Polypropylene Impact Copolymer (ICP)

Esenttia

ESENTTIA® 20C65NA

Processing Methods: Compounding, Injection Molding

Additives Included: Nucleating Agent, Anti-Static Agent

Characteristics: High melt flow rate control reologhy Impact block copolymer polypropylene; very high impact/stiffness balance; tough weld line; with nucleant and antistatic additives. Recommended for: Injection molding of rigid containers as pails, buckets, housewares, industrial applications; compounding for the automotive industry; TPO.