Consumer Goods

Carbon Inc.

CarbonResin™ RPU 61

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Carbon Inc.

CarbonResin™ RPU 70

CarbonResin™ RPU 70 is a tough, heat resistant material that is a good choice for parts requiring strength, toughness, and moderate heat resistance. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS. RPU 70 has a UL 94 HB flame resistance classification.

Precision Polymer Engineering

Precision Polymer™ Z85L

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

Sylvin Technologies

Sylvin™ 9734-73 Black

Sylvin™ 9734-73 Black is a vinyl compound formulated for injection molding applications that require good mold release.

Precision Polymer Engineering

Perlast® G76W

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

Sylvin Technologies

Sylvin™ 6071-80 NATURAL

Sylvin™ 6071-80 Natural is a vinyl / nitrile rubber blend formulated for injection molding or extrusion applications that require enhanced low temperature properties.

Precision Polymer Engineering

Perlast® ICE G75LT

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

Precision Polymer Engineering

Perlast® G92E

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

Sylvin Technologies

Sylvin™ 86043-66 Clear

Sylvin™ 86043-66 Clear is a vinyl compound formulated with a citrate plasticizer for extrusion applications that require PROP 65 and reach compliance.

Sylvin Technologies

Sylvin™ 9600-85 Clear

Sylvin™ 9600-85 Clear is a vinyl compound formulated for clear molding applications.

Sylvin Technologies

Sylvin™ 8873-92 White 1196

Sylvin™ 8873-92 White 1196 is a vinyl compound formulated for coextrusion applications.

Sylvin Technologies

Sylvin™ 83094-80UV Black

Sylvin™ 83094-80UV Black is a flexible vinyl compound formulated for outdoor weatherstripping applications. This compound contains a UV additive for improved outdoor weathering.

Precision Polymer Engineering

Precision Polymer™ V75J

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Sylvin Technologies

Sylvin™ 83060-70LGUV Natural

Sylvin™ 83060-70LGUV Natural is a vinyl compound formulated for extreme weather garden hoses that require UV resistance and a low gloss surface.

Sylvin Technologies

Sylvin™ 8808-70D Natural

Sylvin™ 8808-70D Natural is semi-rigid vinyl compound formulated for extrusion applications.

Sylvin Technologies

Sylvin™ 8203-55 Grey 9540

Sylvin™ 8203-55 Gray 9540 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 4225-80 Black

Sylvin Technologies Sylvin™ 4225-80 Black is a vinyl compound formulated per ASTM D2287-96 with a 50502 callout. This compound is suitable for extrusion or injection molding applications.

Sylvin Technologies

Sylvin™ 4280-60 Natural

Sylvin™ 4280-60 Natural is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Sylvin Technologies

Sylvin™ 8225-95 Natural

Sylvin™ 8225-95 Natural is a vinyl compound formulated for general purpose extrusion or molding applications.

Sylvin Technologies

Sylvin™ 8203-55 Green 3172

Sylvin™ 8203-55 Green 3172 is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 8203-55 Black

Sylvin™ 8203-55 Black is a vinyl compound formulated with a non phthalate plasticizer for injection molding applications.

Sylvin Technologies

Sylvin™ 8925-80 BLACK

Sylvin™ 8925-80 Black is a vinyl compound formulated for profile extrusion applications.

MOCOM Compounds

ALFATER® XL A85E 2GP0000

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds

ALFATER® XL D40I 2GP0000

MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.

MOCOM Compounds

ALFATER® XL A90I 2GP0050

MOCOM Compounds ALFATER® XL A90I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds

ALFATER® XL ECO D40 2GP0000

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds

ALFATER® XL A50I 3EF0010

MOCOM Compounds ALFATER® XL A50I 3EF0010 is a black Thermoplastic Vulcanisate (PP+EPDM) which is easy to flow and has high surface quality. It offers good weathering, chemical, ozone, hot air and hydrolysis resistance. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profiles, cable ducts, and 2K components. It adheres to Polypropylene Homopolymer, Polypropylene Copolymer, Polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer in general.

MOCOM Compounds

ALFATER® XL A80I 3EF0010

MOCOM Compounds ALFATER® XL A80I 3EF0010 is a thermoplastic vulcanisate (PP+EPDM) with a black color and special features including easy flow, high surface quality, black fulfilling weathering dry, hot (Kalahari, PV3929), black fulfilling weathering moist, hot (Florida, PV3930), good weathering resistance, good chemical resistance, and good ozone and hot air resistance. It is applicable to the automotive, building and construction, electrical and electronic, sport and leisure, and furniture market segments and can be used for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and has a maximum service temperature range of -40-125°C.

MOCOM Compounds

ALFATER® XL A55I 2GP0000

MOCOM Compounds ALFATER® XL A55I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color, designed for injection molding. It has excellent recovery, weather resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, furniture and injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Furthermore, it is also capable of adhering to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds

ALFATER® XL D40I 4FC0010

MOCOM Compounds ALFATER® XL D40I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for food contact and compliant with EN 71-3. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance with an easy flow. It is suitable for usage in packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, protection caps, caps/closures, containers, and kitchenware.

MOCOM Compounds

ALFATER® XL A75I 2GP0050

MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.

MOCOM Compounds

ALFATER® XL A60I 4GP0000

MOCOM Compounds ALFATER® XL A60I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color and bright inherent color. It is suitable for automotive, building and construction, electrical and electronic, sport and leisure and furniture applications, and is suitable for injection molded parts, seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, casters, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber. It is resistant to heat, weather and ozone.

MOCOM Compounds

ALFATER® XL A50I 4GP0000

MOCOM Compounds ALFATER® XL A50I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It has low emissions, good colorability, easy flow, excellent weathering resistance, excellent chemical resistance, excellent ozone resistance, excellent hot air resistance, and excellent hydrolysis resistance. It is suitable for injection molding and can be used for a wide range of applications, such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds

ALFATER® XL A90I 4FC0010

MOCOM Compounds ALFATER® XL A90I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for processing injection molding. It has special features such as food contact compliance with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in a variety of market segments such as packaging, household goods, food processing industry, toys, and is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchen ware and 2K components with a maximum service temperature range ranging from -40-125°C.

MOCOM Compounds

ALFATER® XL A80I 4FC0010

MOCOM Compounds ALFATER® XL A80I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer at a temperature of 70-80°C for 2-4 hours. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, as well as easy flow. It is compliant with EN 71-3, making it suitable for food contact, and is suitable for the packaging, household goods, food processing industry, toys, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, protection caps, caps / closures, containers, kitchen ware, and 2K components.

MOCOM Compounds

ALFATER® XL A75I 2GP0000

MOCOM Compounds ALFATER® XL A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material suitable for injection molding. It is suitable for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and can be used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.