products in Consumer Goods: Sporting Goods

Toray

Amilan® CM3001G-45

Toray Amilan® CM3001G-45 is a Polyamide 66 (Nylon 66) product filled with 45% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

BARLOG plastics GmbH

Kebablend® / WR 01/2202

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

BARLOG plastics GmbH

Kebater® PBT B400 Black 9091

PBT unreinforced, injection molding type, approved for use in contact with food

Kettlitz-Chemie

Kettlitz Chemie Mediaplast CL/GR

Mediaplast CL/GR is a Chlorinated thermostable paraffin as ”dry liquid“ to improve the polarity of rubber compounds especially based on EPM, EPDM and IIR for UHF curing. In combination with antimony trioxide Mediaplast CL/GR may also be used as flame retarding component.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/1

BARLOG plastics GmbH Kebablend® / WR XB 111001/1 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

BARLOG plastics GmbH

Kebablend® / WR 01/2105

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Momentive Performance Materials

LIM™ 6071

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

BARLOG plastics GmbH

Kebablend® / WR FE 190202

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

Franplast

Chemiton® Flex

Chemiton® Flex is based on TPO (thermoplastic polyolefin elastomer) are particularly suitable for food contact, fatty and oily food. The available grades for food contact, indeed, show a better resistance to oil, fat and hydrocarbon in comparison to traditional compounds based on HSBC.

BARLOG plastics GmbH

Kebaflex® / U FE 181105/2 Natural

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

PENTAC Polymer GmbH

Pentamid™ A GV15 E H black

Pentamid A GV15 E H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, impact modified.

BARLOG plastics GmbH

Kebaform® C 909 WR

POM copolymer unreinforced, medium viscosity, UV stabilized

Plastcom, spol. s r.o.

SLOVAMID 6 GF 25 FRG 5 (190000)

PA 6 reinforced with glass fiber, flame retarded

PENTAC Polymer GmbH

Pentamid™ B GV15 E H black

Pentamid B GV15 E H black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced, impact modified.

Toray

Amilan® CM1017

Amilan® CM1017 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Dioshy

Dioshy TPU T960DM

Dioshy TPU T960DM is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

BARLOG plastics GmbH

Kebablend® / WR XB 081101

BARLOG plastics GmbH Kebablend® / WR XB 081101 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

Dioshy

Dioshy TPU E990M

Dioshy TPU E990M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

BARLOG plastics GmbH

Kebablend® / WR 02/2110

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

CP-Polymer Technik

Wellamid® MR259 22LH-N

Kunststoff-Kontor-Hamburg

GERMAFORM 13 PTFE 18 SI 2-6940

GERMAFORM 13 PTFE 18 SI 2-6940 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main feature of GERMAFORM 13 PTFE 18 SI 2-6940 is: lubrication.

3D Systems

DuraForm® PA

Durable polyamide (nylon) material for real-world physical testing and functional use.Applications Complex, thin-wall ductwork Functional prototypes that approach end-use performance properties Appropriate for low-to-mid-volume rapid manufacturing Medical applications requiring USP Class VI compliance, or biocompatibility Motorsports Aerospace Housing and enclosures Impellers and connectors Consumer sporting goods Vehicle dashboards and grilles Snap-fit designs Parts requiring machining or joining with adhesives Features Excellent surface resolution and feature detail Easy-to-process Compliant with USP Class VI testing Compatible with autoclave sterilization Good chemical resistance and low moisture absorption Benefits Nicely balanced mechanical properties and processability Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable parts as demanded by manufacturers Machinable and paintable for demonstration parts

Kettlitz-Chemie

Kettlitz Chemie TAIC 70

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Dynasol Elastomers

Emulprene™ 1006CR

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Great Eastern Chemical

ISOTHANE 1075A

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

BARLOG plastics GmbH

Kebater® PBT B510

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

Kettlitz-Chemie

Kettlitz Chemie Antitack BTO-44 VC

Antitack BTO-44 VC is a powdered antitack agent, basically containing inert minerals in combination with calcium stearate, detergents, anti-foam and anti-rust agents for the treatment of unvulcanized rubber compounds, endless strips and granules. The product itself is most suitable for batch-off machines with spraying and dipping systems. After drying, the antitack film which remains on the surface of the rubber compounds is easy to control visually.

Hughes Polymer Additives

Ficel® OB

Ficel® OB is used as Flexible PVC, Rubber/Plastisol.

Kettlitz-Chemie

Kettlitz Chemie Silanogran M

Mercapto silane for sulfur cured rubber compounds which are containing silica, clays or metal hydroxides as filler. It is suitable for all elastomers and recommended to use if an improvement of technical results, such as tear strength, modulus, compression set or abrasion is required.

Elastron

SEBS - ELASTRON G500.A60.B.ABS

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

BARLOG plastics GmbH

Kebablend® / WR 01/1220

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

Momentive Performance Materials

LIM™ 6040

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/12

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

Elastron

SEBS - ELASTRON G101.A30.B

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

BARLOG plastics GmbH

Kebablend® / WR 01/2120

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

Momentive Performance Materials

LIM™ 6030

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.