products in Consumer Goods: Sporting Goods

Kettlitz-Chemie

Kettlitz Chemie TAC/GR 70

TAC/GR 50 is a 50 % and TAC/GR 70 a 70 % triallylcyanurate (TAC) in granular form. TAC/GR gran-ules are more stable and better applicable in automatic weighing machines than TAC/GR 70, whereas the latter contains a higher amount of active substance.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast WH

Mediaplast WH is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

Elastron

SEBS - ELASTRON G500.A60.N.ABS

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

BARLOG plastics GmbH

Kebaflex® / P FE190201

Polyester elastomer, Shore D25, suitable for food contact

BARLOG plastics GmbH

Kebablend® / WR 01/1120/2110

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebablend® / WR XB 111001/5

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebablend® / EC FE 190801 TPE

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 50 TS

PA 66 reinforced with glass fiber, heat stabilized

Plastcom, spol. s r.o.

SLOVALEN PC 78 FRT 5

PP flame retarded

Elastron

SEBS - ELASTRON G101.A83.B

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

BARLOG plastics GmbH

Kebater® PBT B511T

PBT unreinforced, highly impact modified

BARLOG plastics GmbH

Kebablend® / EC FE 190501 TPE

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

BARLOG plastics GmbH

Kebaflex® / U D72 ST B.01

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 20 GB 10 HI

PA 66 reinforced with glass fiber and glass bead, impact modified

BARLOG plastics GmbH

Kebablend® / WR FE 161104

BARLOG plastics GmbH Kebablend® / WR FE 161104 is a special compound based on ABS, with improved sliding and wear behavior as well as low noise when friction is paired with plastic elements.

Toray

Amilan® CM1011G-30

Toray Amilan® CM1011G-30 is a Polyamide 6 (Nylon 6) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Primary characteristics are flame rated.

IruChem

Irubond 700

Irubond 700 is a compatibilizer, coupling agent in polyethylene system.

Toray

Amilan® CM1011G-15

Toray Amilan® CM1011G-15 is a Polyamide 6 (Nylon 6) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Primary characteristics are flame rated.

Elastron

SEBS - ELASTRON G300.A85.N

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Kettlitz-Chemie

Kettlitz Chemie Antitack BTO-7

Antitack BTO-7 is a pigment-free antitack agent for the treatment of unvulcanized rubber compounds based on different biodegradable detergents in combination with anti-foam and anti-corrosive additives. The product was developed especially for the treatment in batch-off equipment working in dipping or spraying system. The use of Antitack BTO-7 results in an extremely proper production site and in a very low wear and tear of the machinery.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast 60

Mediaplast 60 is a highly effective chemical peptizer for natural and Isoprene rubber, based on the well-known dibenzamidodiphenyldisulfide (DBD). However, it does contain an activator/catalyst system which enables the product to show superior efficiency in comparison to the products you find on the market today.

BARLOG plastics GmbH

Kebablend® / EC FE 170501 PBT

PBT functional compound, electrically conductive

BARLOG plastics GmbH

Kebaform® / C 130 H

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH

Kebaflex® - H / SABS 70 A.03 Black

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH

Kebablend® / WR 01/2110

KEBABLEND / WR 01/2110 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH

Kebaform® / C FE 161105

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

BARLOG plastics GmbH

Kebablend® / WR 02/2102

BARLOG plastics GmbH Kebablend® / WR 02/2102 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

BARLOG plastics GmbH

Kebablend® / WR 04/2530/2115

BARLOG plastics GmbH Kebablend® / WR 04/2530/2115 is a tribologically modified special compound based on PA66 with 30% glass balls and 15% PTFE. The product is characterized by increased rigidity, isotropic shrinkage behavior, good sliding behavior and high wear resistance.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 30 FRG 5

PA 66 reinforced with glass fiber, flame retarded

Plastcom, spol. s r.o.

SLOVAMID 66 GF 15 GB 25 TS

PA 66 reinforced with glass fiber and glass beads, heat stabilized

BARLOG plastics GmbH

Kebablend® / WR XB 111001/3

BARLOG plastics GmbH Kebablend® / WR XB 111001/3 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

Aliancys

Synolite™ 8488-G-1

Plastcom, spol. s r.o.

SLOVAMID 66 GF 10

PA 66 reinforced with glass fiber

MITO Material Solutions

MITO® E-GO™

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

MITO Material Solutions

MITO® ACRE™

MITO® ACRE™ is a renewable, sustainable, cornstarch-based additive that can be used to replace non-renewable fillers like mica. Much like MITO® E-GO™, MITO® ACRE™ added to a polymer acts as a scaffold, creating remarkable bonding and adherence. It is easy to use and integrate, with the same reactive dispersion as MITO® E-GO™. For added flexibility, it doesn’t alter the optical properties of polymers and can be processed with pigmentation. Most importantly, the unique structural properties of MITO® ACRE™ greatly improve product performance.   https://mitomaterials.com/products/mito-acre

Braskem America

SVT2180

Braskem America SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, thermoplastics, and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrinkage, high capacity of shrinkage, and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866.