products in Consumer Goods: Sporting Goods

Hughes Polymer Additives

Ficel® HC ES 4050

Ficel® HC ES 4050 is used as Flexible PVC, Rigid PVC, Styrenics, Polyolefin.

Jilin Xingyun Chemical (Jilin Chemical Group)

Jilin Xingyun Chemical (Jilin Chemical Group) Styrene Butadiene Rubber 1502 Grade 1

Jilin Xingyun Chemical (Jilin Chemical Group) Styrene Butadiene Rubber 1502 Grade 1 is The shelf of styrene butadiene rubber is longer because of its good stability.The property of styrene butadiene rubber is similar to that of natural rubber. It will appear physical and chemical change,whlie its oxidization is slow under the effect of light,heat,oxygen and ozone.

KMI Group

KMI Group PC 3031UV-80

KM PC 3031UV-80 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.

Ria Polymers

RIABLEND® A 028 00 SF natur

RIABLEND A 028 00 SF natur is in Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

Liwang Chemical Nantong

Liwang Chemical Nantong Permanent Yellow organic pigment W

Liwang Chemical Nantong Permanent Yellow organic pigment W are used in Water-based ink.

CP-Polymer Technik

Wellamid® GFT33N051-N2

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

BARLOG plastics GmbH

Kebaflex® - H / SPA3 60 A.02 Natural

TPE-S, Shore A64, modified for very good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

Noble Polymers

Flextuff® S2700-00

70 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

WIPAG

WIC™ PP 20 BK UV

As high-tech plastics, WIC™ PP 20 BK UV compounds impress with their low weight (i.e. low density) combined with high strength and rigidity. The material is also dimensionally stable and offers excellent electrical conductivity as well as good friction and wear properties.The basis of our WIC compounds is carbon fiber recycling. The source of the fibers are cuttings from the production of lightweight components that are increasingly being produced in the aerospace industry, medical devices and the automotive industry, for example. With our innovative carbon fiber recycling technology, carbon fiber residues are processed and homogeneously incorporated into carbon-fiber compounds – a sustainable solution. WIPAG has secured the supply of carbon fibers through long-term contracts.

Elastron

SEBS - ELASTRON G500.A50.N.ABS

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

Elastron

SEBS - ELASTRON G500.A40.B.PA

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

3D Systems

DuraForm® ProX HST Composite

Elastron

TPV - ELASTRON V101.A47.B

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

KMI Group

KMI Group PE KM-U-143sMR

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.

PENTAC Polymer GmbH

Pentamid™ A GV15 E H RC black

Pentamid A GV15 E H RC black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, impcat modified, recompound.

Plastcom, spol. s r.o.

SLOVALEN PH 99 GB 30 LS

PP reinforced with glass beads, UV stabilized

Plastcom, spol. s r.o.

SLOVASTER B1 GF 10

SLOVASTER B1 GF 10 is a PBT basic type for injection molding. Melt is characterized by outstanding fludity, which enables injection molding of complicated and divided products also on multiple molds. Anisotropy of shrinkage enables injection molding of round, cylindric or other hole products. Delivered in natural mode and in the full RAL color scale.

Elastron

SEBS - ELASTRON G100.A55.N

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 25 HTS

PA 66 reinforced with glass fiber, heat stabilized, hydrolysis resistant

Globe Composite Solutions, Ltd

Brandonite® 6000-95A

Brandonite® 6000-95A contains feature called Retaining strength up to 150ºC.

Crosslink Technology Inc.

Crosslink Technologies XHD1843

XHD1843 is a two component, low viscosity, room temperature curing, epoxy system. The product cures to a tough, resilient, semi-flexible casting.

Elastron

TPV - ELASTRON V100.A70.B

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

Elastron

SEBS - ELASTRON G101.A45.N

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Mepol

MEPLAC ES F17

MEPLAC ES F17 is a ABS injection molding grade with 17% glass fibers reinforced.

Elastron

SEBS - ELASTRON G100.A50.B

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

MARFRAN

MARFRAN® B F2

MARFRAN® B F2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This Compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Hughes Polymer Additives

Ficel® HC AZ 40

Ficel® HC AZ 40 is used as Flexible PVC, Rigid PVC, Polyolefin.

Cnano

FloTube™ 6121 CP103-6B09 PC/ABS MB 9%

FloTube™ 6121 CP103-6B09 PC/ABS MB 9% contains 9% 6121 FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

Elastron

SBS - ELASTRON D103.A50.B

A soft, black SBS based thermoplastic elastomer (TPE) compound designed for eraser applications.

Toray

Amilan® CM1017K

Toray Amilan® CM1017K is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and rigid.

Plastcom, spol. s r.o.

SLOVASTER B1 GF 20

SLOVASTER B1 GF 20 is a PBT basic type for injection molding. Melt is characterized by outstanding fludity, which enables injection molding of complicated and divided products also on multiple molds. Anisotropy of shrinkage enables injection molding of round, cylindric or other hole products. Delivered in natural mode and in the full RAL color scale.

LOTTE Advanced Materials

INFINO UF-1050

Plastcom, spol. s r.o.

SLOVASTER B1 BT

SLOVASTER B1 BT is a PBT basic type for injection molding. Melt is characterized by outstanding fludity, which enables injection molding of complicated and divided products also on multiple molds. Anisotropy of shrinkage enables injection molding of round, cylindric or other hole products. Delivered in natural mode and in the full RAL color scale.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 30 TS

PA 66 reinforced with glass fiber, heat stabilized

Plastcom, spol. s r.o.

SLOVALEN PH 73 T 20

PP reinforced with mineral filler, UV stabilized

Kotec

Kotex K-20 Polycarbonate

Kotex K-20 Polycarbonate is a mold release, high flow, transparent.