Consumer Goods

Albemarle Corp

SAYTEX® RB-7980

SAYTEX® RB-7980 flame retardant is a blend of SAYTEX RB-79 flame retardant,polyol and a liquid phosphate ester. The mixture of the diester/ether diol of tetrabromophthalic anhydride and phosphate results in a lower viscosity liquid than neat SAYTEX RB-79 flame retardant. Application areas are Reactive diol mixture for rigid polyurethane foams, urethane elastomers and coatings.

Presafer

Nitrophor™ FR2000

Nitrophor™ FR2000 is a kind of new low halogen environmentally friendly flame retardant with N, P and Br for PP. NitrophorTM FR2000 has advantages of low dosage, low bromine content, no migration and no need of Sb2O3. Besides, it is also suitable for mineral filling system and masterbatch system. Products with NitrophorTM FR2000 can pass the tests of UL 94 V-2 (1.5mm), GWFI 850°C and GWIT 750°C.

Albemarle Corp

SAYTEX® RB-79

SAYTEX® RB-79 flame retardant is a stable, reactive bromine-containing diester/ether diol of tetrabromophthalic anhydride. The nominal structure of SAYTEX RB-79 flame retardant is a mixed ester of tetrabromophthalic anhydride with diethylene glycol and propylene glycol. It is used in reactive diol for rigid polyurethane foam and urethane elastomers and coatings.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast CL/GR

Mediaplast CL/GR is a Chlorinated thermostable paraffin as ”dry liquid“ to improve the polarity of rubber compounds especially based on EPM, EPDM and IIR for UHF curing. In combination with antimony trioxide Mediaplast CL/GR may also be used as flame retarding component.

Albemarle Corp

SAYTEX® RB-7001

SAYTEX® RB-7001 flame retardant is a reactive diol that contains both halogen and phosphorous. The product is a low-viscosity, amber-colored liquid that has improved processing and storage characteristics versus conventional brominated diols. SAYTEX RB-7001 flame retardant’s balance of halogen and phosphorus provides optimized flame retardant characteristics in both PIR and PUR foams. Its lower viscosity at room temperature eliminates the need for heated, insulated storage tanks and drum heating facilities.Reactive diol blend for rigid polyurethane and polyisocyanurate foams, urethane elastomers and coatings.

Oceanchem Group

Oceanchem Group Zinc Stannate(ZS)

Zinc Stannate(ZS) is a white powder, insoluble in water, it is non‐toxic fire retardant and low heating rate of flame retardants, flame retardant and inhibit the double effect of the smoke. Suitable for use within the operating temperature below 570 °C material.

Presafer

Nitrophor™ FR1000

Nitrophor™ FR1000 is a kind of new low halogen environmentally friendly flame retardant with N, P and Br for PP. Compared with bromine-based flame retardant, Nitrophor™ FR1000 has advantages of low dosage, low bromine content, no migration and no need of Sb2O3.

Duslo

DUHOR® N-PL/S

Duhor® N-PL/S is a flame retardant and smoke suppressor. DUHOR® N-PL/S is surface untreated white powder of magnesium hydroxide with limited particle size distribution and specific morphological properties.

Oceanchem Group

Oceanchem Group DBNPG

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

Ta Haw Enterprise

Ta Haw Enterprise R 104

Ta Haw Enterprise R 104 is a flame retardant, PS injection, extrusion.

Albemarle Corp

SAYTEX® RB-9170

SAYTEX® RB-9170 flame retardant is a low-viscosity, reactive, aromatic bromine-containing diol with high bromine content. The product is a low-viscosity amber liquid with improved processing and storage characteristics compared to conventional brominated diols. Low viscosity at room temperature eliminates the need for heated, insulated storage tanks and drum-heating facilities. It is used as reactive diol for rigid polyurethane and polyisocyanurate foams, urethane elastomers and coatings.

The R.J. Marshall Company

The R.J. Marshall Company SDAOM

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

The Mitsubishi Chemical Group

METABLEN™ S 2501

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Kafrit Group

KAFRIT FR 0K580 LL

KAFRIT FR 0K580 LL offers a highly efficient halogen-free flame retardant masterbatch based on polyethylene. This flame retardant masterbatch is designed to meet stringent standards such as FMVS 302, UL94, DIN 4102 b2, and EN 13501-1. With the added benefit of a fr/uv stabilizer system, it is well-suited for application in fibers and films, ensuring high transparency in PE/PP materials.

Kafrit Group

KAFRIT HFFR 00242 PP

KAFRIT HFFR 00242 PP offers highly efficient halogen-free flame retardancy based on polypropylene (PP). It's suitable for use in consumer goods and industrial markets, particularly in applications such as leather, textiles, and technical fabrics. It serves to enhance flame retardancy in nonwoven materials.

Dar-Tech Inc.

Portaflame® SG 10 LV

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.

Dar-Tech Inc.

Portaflame® SG 20

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Securoc® B125

Securoc® B125 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 10 LSA

Portaflame® SG 10 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 10 LSA is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It is not a dangerous substance (DSD or CLP) and does not contain substances of very high concern (SVHC), including their fire decomposition products.

Dar-Tech Inc.

Securoc® B9

Securoc® B9 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 63

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 10

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 35

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 50

Portaflame® SG 50 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Securoc® B25

Securoc® B25 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 55

Portaflame® SG 55 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG10 LV-02

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Securoc® B45

Securoc® B45 is produced from carefully selected, naturally occurring magnesium hydroxide. The standard quality of Securoc® B is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and particle size is kept within a narrow variation. Securoc® B products are developed as functional halogen-free flame retardant (HFFR) fillers for plastics and rubbers. Their flame retardant activity is primarily due to the endothermic decomposition of metal hydroxide (the heat sink effect) and the simultaneous release of water vapor. This reaction starts at about 300°C. Besides being flame retardant, they also possess a strong smoke-suppressing ability. These flame retardants are used in applications where processing temperatures exceed 200ºC, making ATH unsuitable. Its main uses are in wire and cable compounds, polyolefin roofing membranes, and electrical appliances based on thermoset compounds.

Dar-Tech Inc.

Portaflame® SG 30 LV

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Dar-Tech Inc.

Portaflame® SG10 LV-01

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 100 LV

Portaflame® SG 100 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). This range of Portaflame® SG -LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels in different polymer systems. It is used in aluminum sandwich panels to make them flame retardant.

Dar-Tech Inc.

Portaflame® SG 100

Portaflame® SG 100 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 200

Portaflame® SG 200 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 25

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Inc.

Portaflame® SG 55 LV

Portaflame® SG 55 LV are produced from carefully selected, synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels. It is used to make flame retardant aluminum sandwich panels.

Dar-Tech Inc.

Portaflame® SG 40

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.