products in Consumer Goods: Plasticizer

Payal Group

Paychlor D-52

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Daihachi Chemical Industry

Daihachi Chemical Industry TPP Triphenyl phosphate

Daihachi Chemical Industry TPP Triphenyl phosphate is a Flaky solid material. It has good compatibility with nitrocellulose, acetylcellulose and polyvinylchloride. It has low volatility. Bringing water resistance and oil resistance.

Avanzare Innovacion Tecnologica

avanSTATIC SBR/EPDM

avanSTATIC SBR/EPDM is a very diverse material, with many different applications and formulas, so the additive and the amount needed vary greatly depending on the type of rubber, formula, polarity of the mixture, etc…

Polyfill Technologies

Polyfill Technologies ELASTOFILL Compound PT-EF05

Polyfill Technologies Elastofill Compound PT-EF05 is plastomeric material based on the specialty polymer blends with the unique characteristics. The product is highly compatible with LD, LLDPE and PP. It enhances the softness, elongation at break, elasticity and impact resistance of the film. Besides it also improves the transparency in the films. It also enhances the thermal bonding strength.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast NB-4

Mediaplast NB-4 is a special adipine acid plasticizer at an exceptionally reasonable price for the use in polar polymers like NBR, H- and XNBR, CM / CSM, CR, ECO, etc. Mediaplast NB-4 is, due to its relatively low volatility and also because of its extremely low setting point, suitable for heat-resistant as well as cold flexible rubber articles (see technical data).

Tina Organics

Tina Organics Trixylenyl Phosphate

Tina Organics Trixylenyl Phosphate is developed mainly for Oil Industry users, meeting the standard of air release.

Payal Group

Paychlor S-68

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Purinova

PureFlex E1540

PureFlex E1540 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

UPC Group

UPC Group UN488 (DOTP)

UPC Group UN488 (DOTP) is a Non-P plasticizer. PVC products perform well in electrical insulation, heat-resistance, and cold-resistance.

WSD Chemical

WSD Chemical Dibutyl phthalate/DBP Super Grade

WSD Chemical Dibutyl phthalate/DBP Super Grade used for main plasticizer for cellulosic resins and polyvinyl chloride, good solvent potency and good compatibility, fine softening property, but less aging-duration and anti-wanter-extraction.DBP plasticizer also used as plasticizer for polyvinyl acetate, alkyd resins, ethyl cellulose and rubbers.

Elekeiroz

EKFLEX 883

EKFLEX 883 is a colorless liquid plasticizer based on diisooctyl phthalate (DIOP) and isomers thereof, featuring excellent performance and providing great value for money.

Polyvel

Polyvel CP-L01

CP-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

Peter Greven

LIGA GLYZERIN 86

CTF 2000 NV

Addiflam® SR10

Addiflam® SR10 can be applied by padding, various coating systems (instable, crushed stable foam, paste, kiss roll, lamination) either supplied as a ready-to-use compound or as an additive (powder, dispersions, emulsions, slurries) for self-compounding purposes. Cost effective tailor made solutions are available upon end use, manufacturing options and level of durability required.

Zhejiang Shengzhou Wanshida Chemicals

Zhejiang Shengzhou Wanshida Chemicals Plasticizer WSD800

WSD-800 is a colorless transparent oily liquid PVC plasticizer obtained from vegetable oil through catalytic hydrogenation, hydrolysis, dehydrogenation, distillation and esterification.

Kettlitz-Chemie

Kettlitz Chemie Mediaplast 650 A

Mediaplast 650 A is a synthetic plasticizer based on polyalkylbenzene (bi- and trialkylated aromatics), which is especially recommended for the use in elastomers with low polarity like NR, IIR, BR, SBR, EP(D)M, etc. The compatibility with rubber compounds containing strong polar elastomers, like nitrile rubber for example, is low.

Payal Group

Paychlor D-40

Paychlor D-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Natrochem

Natro-Cel R-A

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

UPC Group

UPC Group DPHP

UPC Group DPHP has good compatibility with PVC, and its heat-resistance, cold-resistance, durability, migration-resistance, electrical property and volatility loss are better than DOP. DPHP has low-volatility properties and generates less fumes during processing, so it improves the durability of the product. Moreover, it is widely used in the cover and insulation of electric wires, and can also replace DIDP used for UL 70~90°C electric wire.

Payal Group

Paychlor D-55

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Payal Group

Paychlor D-62

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Puyang Changyu Petroleum Resins

Puyang Changyu Petroleum Resins MBTS(DM) Powder

Puyang Changyu Petroleum Resins MBTS(DM) Powder has medium curing rate in NR and SR; suitable for most general rubbers; Used as plasticizer and delay agent in chloroprene rubber. It is usually used together with secondary accelerator in the synthesis of polymers; has better scorch safety than MBT.

Elekeiroz

EKFLEX 2000

EKFLEX 2000 is a non-phthalate plasticizer that boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Payal Group

Paychlor S-62

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Hairma Chemical (GZ)

Hairma Chemical (GZ) Diacetylepoxy vegetable oleic acid glyceride HM-828

Hairma Chemical (GZ) Diacetylepoxy Vegetable Oleic Acid Glyceride HM-828 is a new type of environmentally friendly, completely biodegradable plasticizer synthesized from vegetable oil, followed by transesterification, acetylation, and epoxidation. It is used as the main plasticizer.

Kemai Chemical

Kemai Chemical RUBBER PLASTICIZER A

Kemai Chemical RUBBER PLASTICIZER A is a plasticizer of natural rubber, isoprene rubber and other synthetic rubbers, it has the function for delaying curing, shortening milling time and improving the material's fluidity.

Natrochem

Tar-Cel 14-A

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

Purinova

PureFlex O1580

PureFlex O1580 plasticisers are phthalate-free polymeric plasticisers with an aliphatic, linear structure. They are dedicated for plasticizing polymers (vinyl chloride) - both suspension and emulsion PVC as well as other plastics, such as polylactic acid (PLA). Polymeric plasticisers ensure high temperature resistance, low migration and resistance to oils.

UPC Group

UPC Group DINP

UPC Group DINP has good compatibility with PVC and high plasticizing efficiency. DINP has better performance than DOP in electrical insulation, durability, heat-resistance and low volatility. In addition, customers can produce higher volume products (like PVC film and sheet) with DINP formula.

North Wanxing Chemical Co., Ltd.

North Wanxing Chemical Co., Ltd. Dimethyl Sebacate

North Wanxing Chemical Co., Ltd. Dimethyl Sebacate is a colorless and transparent oil, is compatible with benzyl cellulose, cellulose aclate, cellulose acetobutyrate, cellulose acetopropionate, chlorinated rubber, ethyl cellulose, polystyrene, polyvinyl butyral and vinyl plasticizer, softening agent and solvent for cellulose resin, polyethylene resin and synthetic rubber.

Indo-Nippon Chemical

Indo-Nippon Chemical Tri Butyl Citrate (TBC)

Indo-Nippon Chemical Tri Butyl Citrate (TBC) is a Plasticizers for PVC, Cellulosic plastics, etc. It is a speciality Plasticizer and is used to manufacture products required to be non toxic and environmentally safe. The product finds applications in PVC product for medical applications, toys, etc as humectants for cigarette filters, for lacquers, varnishing, etc in perfumery products, for adhesives based on acetate/acrylates, etc.

Peter Greven

LIGA GLYZERIN 99,5

Payal Group

Paychlor D-42

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

UPC Group

UniHydro® UN899

UniHydro® UN899, Diisononyl cyclohexane-1,2-dicarboxylate, is a non-phthalate plasticizer. It is clear and odorless just like water and widely used in PVC products. Due to its non-benzene and non-toxic nature, it provides better safety assurances. It is especially suitable for human contact products such as medical devices, children's toys, food packaging and flooring.

Shandong Chuanjun Chemical

Shandong Chuanjun Chemical Diethylene glycol dibenzoate(DEDB)

Shandong Chuanjun Chemical Diethylene glycol dibenzoate(DEDB)e is a new plasticizer in China. It widely used in PVC products as main plastizer the 1970's abroad. It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China.

Oceanchem Group

Oceanchem Group TPP

TPP is a non‐halogen flame retardant plasticizer for phenolic resin‐based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.