products in Footwear: Resin

Carbon Inc.

CarbonResin™ RPU 61

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

The Polyolefin Company (TPC)

Cosmothene® EVA H2181

Carbon Inc.

CarbonResin™ RPU 60

CarbonResin™ RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

3H Vinacom

3H Vinacom PVC Compound

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

Versalis - A subsidiary of Eni S.p.A

Edistir® R 850E

Edistir® R 850E is a super high impact polystyrene with good heat resistance.Designed for sheet extrusion and thermoforming of deep drawn containers even diluted with high percentage of GP.Suitable for general injection molding of tough medium-walled articles.Designation: Thermoplastics ISO 2897-PS-I,G,O93-O3-10-18ApplicationsTypical uses are thermoformed food packaging as disposable tumblers, flatwares, yogurt cups, lids. Injection molding of technical items, shoe heels, reels.

Carbon Inc.

CarbonResin™ RPU 70

CarbonResin™ RPU 70 is a tough, heat resistant material that is a good choice for parts requiring strength, toughness, and moderate heat resistance. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS. RPU 70 has a UL 94 HB flame resistance classification.

AdvanSix

Aegis® H55ZI

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Valex Group

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

Spolana (Unipetrol Group)

Neralit® 682.0

Neralit® 682.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 682 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. It is especially suitable for the production of pressure pipes and window profiles. Extrusion technology on two-worm machines is suitable for processing the product.

The Polyolefin Company (TPC)

Cosmothene® EVA H2020

Lati Industria Thermoplastici S.p.A

Lastane™ 50

Polyurethane (PUR). Unfilled. Very good noise reduction. Good impact resistance even at low temperature.

Xenia

XECARB® 11-C20-HP

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

Sipchem

Sipchem EVA 3522 CO

Sipchem EVA 3522 CO is a 22% ethylene vinyl acetate copolymer resin, manufactured by IPC an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 3522 CO is designed for specialty extrusion and compounding applications. Articles made from EVA 3522 CO are soft and have excellent low temperature toughness.

Spolana (Unipetrol Group)

Neralit® 581.0

Neralit® 581.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 581 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.

Imperial Water-proofing Industries Pvt Ltd.

Rubaloy RA - 70

Rubaloy RA - 70 is the most popular and widely used grade of fluxed NBR / PVC in the polymer ratio of 70-30. It is a non-staining, oil, Ozone, abrasion, weather and flex resistant polymer using medium Acrylonitrile Butadiene Rubber with Poly Vinyl Chloride Resin.

Fainplast Compounds

Fainplast™ PVC GS 46/T

Fainplast Compounds Fainplast™ PVC GS 46/T is a Polyvinyl Chloride product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.

Engro Polymer and Chemicals

Engro Polymer and Chemicals sabz pvc au-67s

Engro Polymer and Chemicals sabz pvc au-67s is a medium molecular weight suspension resin. It has a porous particle structure and large interior surface. It has high plasticiser take up and absorption rate. On mixing, it results in free-flowing powder with dry feel. It is very low in fish-eyes and foreign matter.

Spolana (Unipetrol Group)

Neralit® 601.0

Neralit® 601.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 601 polyvinyl chloride is designated for products made of hard (unsoftened) PVC.Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.It facilitates the manufacture of transparent products.​.

Engro Polymer and Chemicals

Engro Polymer and Chemicals sabz pvc au-72

Engro Polymer and Chemicals sabz pvc au-72 is a high molecular weight suspension resin. It has a high plasticiser take up and absorption rate. On mixing, it results in free-flowing powder with dry feel. It is free from gels and foreign matters. It has superior dielectic properties and physical strength, which makes it an ideal choice for electric insulated PVC cables.

Plastcom, spol. s r.o.

SLOVAMID 66 GF 20 GB 10 HI

PA 66 reinforced with glass fiber and glass bead, impact modified

Versalis - A subsidiary of Eni S.p.A

Greenflex® ML 50

Greenflex® ML 50 is an ethylene vinyl acetate copolymer (EVA) for injection molding, compounding and extrusion.Main ApplicationGreenflex ML 50 is recommended for the production of foamed and crosslinked sheets for shoes, dolls, shock absorbers and gasket.

3D Systems

DuraForm® Flex

A durable, rubber-like material with good tear resistance and burst strengthApplications Gaskets, hoses and seals Athletic footwear Ear molds "Soft-touch," over molded grips Features Rubber-like flexibility Durable and tear-resistant Resists harsh environments Good long-term stability Excellent surface finish and feature detail Create colored parts using standard infiltrants Benefits Rapidly produce parts with the look and feel of rubber and thermoplastic elastomers Eliminate the time and cost of casting, machining or other secondary processes Address broad applications requiring rubber-like flexibility and durability Address end-use applications requiring long-term stability Minimal finishing required Reduced cost per part

Braskem America

SVT2180

Braskem America SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, thermoplastics, and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrinkage, high capacity of shrinkage, and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866.

Braskem America

SVT2145R

Braskem America SVT2145R is an ethylene-vinyl acetate copolymer-based resin that offers easy crosslinking and high compatibility with other thermoplastic resins, inorganic fillers, and pigments. Compositions with SVT2145R exhibit remarkable flexibility and fatigue resistance. When cross-linked, the compound demonstrates exceptional abrasion resistance and a high friction coefficient. This grade contains a minimum biobased carbon content of 45%, as determined by ASTM D6866.

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® CHN-250 Natural

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® AGM 350 Natural

Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy.   Applications:  Large components  Appliances  Automotive Interior Trim Boat Jet-propelled Vehicle    Features:  High Melt Flow    Benefits: Easy moldability with low pressure.  Consistently easy to color Quick cycle time

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® AGM 250 Natural

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

Sumika Polymers North America, LLC & Sumika Polymer Compounds Europe, LLC

Noblen® BPC 80 Natural

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding

AdvanSix

Aegis® PIR-H55ZI

Aegis® PIR-H55ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZI, its standard, non-recycled counterpart. Aegis® PIR-H55ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monfilament and multifilament applications as well as carpet fiber.

Envalior

Arnitel® ECO L460

Arnitel® ECO L460 is a high-performance thermoplastic copolyester (TPC) celebrated for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. Across diverse industries like automotive and E&E, it stands as a lighter, more intelligent, and environmentally friendly substitute for conventional rubbers, effectively reducing environmental impact and system costs. This material is specifically tailored for injection molding processes and is remarkable for containing 40% renewable content. It is also suitable for food-contact applications.

Envalior

Arnitel® ECO L700

Arnitel® ECO L700 is a high-performance thermoplastic copolyester (TPC) known for its distinctive blend of flexibility, high-temperature resistance, strength, and excellent processing properties. Across industries including automotive and E&E, it serves as a lighter, more intelligent, and eco-friendly substitute for traditional rubbers, effectively reducing environmental impact and system costs. This material can be efficiently processed via injection molding and is notable for containing 22% renewable content. Additionally, it is suitable for food-contact applications.

Envalior

Arnitel® PL650

Arnitel® PL650 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries such as automotive and E&E, Arnitel® PL650 is becoming a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material can be processed using injection molding technology, making it suitable for various applications.

Envalior

Arnitel® EL630

Arnitel® EL630 is a high-performance thermoplastic copolyester (TPC) offering flexibility, high temperature resistance, and strength, coupled with outstanding processing characteristics. As an eco-friendly alternative to conventional rubbers, it finds applications in industries like automotive and E&E, delivering reduced environmental impact and cost savings. This material is suitable for injection molding processes and complies with food contact quality standards.

Envalior

Akulon® RePurposed RE30 BK00003

Akulon® RePurposed RE30 BK00003 is a high-performance material that combines the qualities of polyamide 6 and polyamide 66. It is widely used by customers worldwide in various applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, this material excels in providing an excellent balance between ease of design and processing while delivering outstanding mechanical properties over a broad temperature range and under diverse conditions.

Envalior

Arnitel® FM8226

Arnitel® FM8226 is a high-performance thermoplastic copolyester (TPC) known for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries spanning from automotive to E&E, it is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material can be processed using both extrusion and injection molding technologies and is specifically designed for foam applications, making it a versatile choice for various industries.

Envalior

EcoPaXX® Q-HG6

EcoPaXX® Q-HG6 is a long aliphatic polyamide with excellent chemical and hydrolysis resistance. It is suitable for thermal management applications and other structural parts. It offers exceptional chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. The material can be processed using injection molding technology. It is heat stabilized and contains 30% glass reinforcement.