Footwear

Stepan Company

STEPANTEX® VL 90 A

STEPANTEX® VL 90 A stands as a diester fabric softener quaternary, delivering excellent softening, antistatic, and rewetting properties. This cationic surfactant paste is applicable in household and industrial cleaners and finds a diverse range of applications, including metal cleaning and polishing compounds, cutting oils, textile auxiliaries, leather conditioners, water repellents, shoe polishes, emulsifiers, paper treatment, and clays.

Kraton

Kraton™ FG1901 G

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Dynasol Elastomers

Solprene® 1205

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Dynasol Elastomers

Paracril™ 3350

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Voelpker Spezialprodukte GmbH

WARADUR® E

WARADUR® E is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. Montanic acids are straight-chained monocarboxylic acids with a chain length in the range of C28 – C32. The corresponding esters exhibit chain length in the range of C58 – C66 and provide this wax with a low volatility, good thermostability and low migration rates.

Kraton

Kraton™ G1726 M

Kraton G1726 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1726 MS - is supplied as a dusted, dense pellet. Kraton G1726 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton

Kraton™ G1701 M

Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU - supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Sasol

SASOLWAX 6530SA

SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.

Kraton

Kraton™ D4150 K

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

The Polyolefin Company (TPC)

Cosmothene® EVA H2181

Carbon Inc.

CarbonResin™ RPU 61

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Kolon Industries

SUKOREZ® SU-640

Kolon Industries SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Sasol

EMULDAC AS-80

EMULDAC AS-80 is a fatty alcohol polyethyleneglycol ether, based on NAFOL 1618S and ethylene oxide (about 80 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

Kraton

Kraton™ G1652 M

Kraton G1652 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 MU - supplied as an undusted powder Kraton G1652 MF - supplied as a dusted powder Kraton G1652 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Dynasol Elastomers

Paracril™ BJLT-M50

Paracril BJLTM50 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer. Packing

Carbon Inc.

CarbonResin™ RPU 60

CarbonResin™ RPU 60 is a tough, abrasion-resistant material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Oltchim

PETOL® 28-2Lm

PETOL 28-2LM is a PPG, with a molecular weight of 4000, with low unsaturation, synthesized with double metal cyano complex catalyst. The product is acidified slightly with phosphoric acid.

3H Vinacom

3H Vinacom PVC Compound

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

Versalis - A subsidiary of Eni S.p.A

Edistir® R 850E

Edistir® R 850E is a super high impact polystyrene with good heat resistance.Designed for sheet extrusion and thermoforming of deep drawn containers even diluted with high percentage of GP.Suitable for general injection molding of tough medium-walled articles.Designation: Thermoplastics ISO 2897-PS-I,G,O93-O3-10-18ApplicationsTypical uses are thermoformed food packaging as disposable tumblers, flatwares, yogurt cups, lids. Injection molding of technical items, shoe heels, reels.

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97

Antitack NP-97 is a Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tank, it passes through the region of highest concentration and gets the optimum coverage of an-titack agent.

Dynasol Elastomers

Paracril™ 3335

Paracril 3335 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Lion Elastomers

Lion Elastomers SBR 1009

Hot polymerized SBR 1009 is recommended for use in calendared products such as slab soling for footwear, and in extruded mechanical goods where smoothness and controlled shrinkage are critical requirements. It is also widely used in sealants and adhesives.

Valex Group

VALEX™ Natural Rubber SGR-10

VALEX™ Natural Rubber SGR-10 is commonly used as Polymer Compounding for a variety of applications.

Kraton

SYLVARES™ TR 7125

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Nantex Industry

Nancar® NBR 1052M30

Nancar® NBR 1052M30 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is a low Mooney version of NANCAR® 1052. The low Mooney provides optimum processing property in highly filled or reinforced compounds..

Kettlitz-Chemie

Kettlitz Chemie Actigran 70

Mediaplast PM is a synthetic aromatic plasticizer based on polyalkylbenzene (bi- and trialkylated aro-matics), which is mainly recommended for the use in elastomers with low to medium polarity, i. e. NR, IIR, BR, SBR, EP(D)M for example, but also CR, CM/CSM, EVA and PNR. Especially in polychloro-prene the often used, expensive ester plasticizers can be replaced completely.

Dynasol Elastomers

Calprene® 401

Calprene 401 is an 80/20 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a radial struc-ture. This product is available in: - Calprene 401 porous crumb. - Calprene 401M powder form dusted with amorphous silica.

Dynasol Elastomers

Calprene® 719

Calprene 719 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color.Calprene 719 is a BHT* and nonylphenol free SBS, FDA approved and suitable for food contact applications.Calprene 719 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

Munzing

ZINPLEX 15

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

Carbon Inc.

CarbonResin™ RPU 70

CarbonResin™ RPU 70 is a tough, heat resistant material that is a good choice for parts requiring strength, toughness, and moderate heat resistance. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS. RPU 70 has a UL 94 HB flame resistance classification.

AdvanSix

Aegis® H55ZI

Aegis® H55ZI is a versatile, unterminated, medium viscosity, nylon 6 homopolymer, used for carpet fiber, as a base resin for engineered plastic compounds, and in monfilament and multifilament applications.

Dynasol Elastomers

Calprene® 540

Calprene 540 is a 60/40 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure. This product is presented in porous pellets and has excellent optical properties due to its clarity.It is stabilized with a non-staining antioxidant system, FDA approved for use in food contact applications, and is essentially gel free with a very clear color.Calprene 540 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds.

Dynasol Elastomers

Calprene® 701

Calprene 701 is a new 69/31 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 701 is a BHT* and nonylphenol free SBS, especially suitable for food contact applications.Calprene 701 offers good mechanical properties and shows a very good yellow index behavior.Calprene 701 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

3D Systems

DuraForm® TPU Elastomer

Kettlitz-Chemie

Kettlitz Chemie Silanogran SI-69/GR 70

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

Dynasol Elastomers

Calprene® 501

Calprene 501 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is available in: - Calprene 501 porous crumb. - Calprene 501C porous pellet. - Calprene 501M powder form dusted with amorphous silica.