products in Footwear

Kraton

SYLVARES™ TR M1115

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.

Munzing

AGITAN® DF 6686 W

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

GRP

GRP ULTRA HIGH & HIGH TENSILE RECLAIM GRP NRF75

GRP Ultra High & High Tensile Reclaim GRP NRF75 is high quality reclaim manufactured for products requiring increased physical properties. It is produced from Retread Buffing Dust/ Powder. The vulcanization properties of GRP High Tensile Reclaim make it particularly suitable for a variety of Natural Rubber products.

Momentive Performance Materials

LIM™ 6010

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

Munzing

AGITAN® DF 681 F

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

Kettlitz-Chemie

Kettlitz Chemie Antitack NP-97/TY-40

Antitack NP-97/TY-40 is a highly concentrated dispersion of zinc stearates. By means of new tech-nologies and high quality raw materials the zinc stearate content could be increased to more than 40 %.

Lati Industria Thermoplastici S.p.A

Lastane™ 50

Polyurethane (PUR). Unfilled. Very good noise reduction. Good impact resistance even at low temperature.

Spolana (Unipetrol Group)

Neralit® 682.0

Neralit® 682.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 682 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. It is especially suitable for the production of pressure pipes and window profiles. Extrusion technology on two-worm machines is suitable for processing the product.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Axel

XTEND® 19ZAM

XTEND® 19ZAM - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

Dynasol Elastomers

Calprene® 500

Calprene 500 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is presented in porous pellets and has excellent optical properties due to its clarity.It is stabilized with a non staining antioxidant system FDA approved for use in food contact applications and is essentially gel free with a very clear color.C-500 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds.

Kraton

Kraton™ G1652 H

Kraton G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 HU - supplied as an undusted powder Kraton G1652 H is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

The Polyolefin Company (TPC)

Cosmothene® EVA H2020

Dynasol Elastomers

Solprene® 1430

Solprene 1430 is a high molecular weight linear random-block styrene/butadiene copolymer with a total content of 40% of styrene, 30% present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. It is a high purity polymer, essentially gel free with a clear color.A choice of either non-staining antioxidant systems, BHT free or phosphite free, is available. All FDA approved for use in food contact applications. It is a high purity polymer, essentially gel free with a clear color.Solprene 1430 is used as an elastomeric impact modifier for plastics, especially in high gloss HIPS by the “in situ” polymerization process. It is also used in vulcanized shoe soles giving high hardness, flexibility and abrasion resistance with good processability.

JSR Corporation

Techno Polymer JSR RB810

JSR has developed this grade as the only supplier in the world. Applications are broad. For example, the vibration absorbing materials for automobile, films, tubes, rubber shoe soles, some injection molded products and plastic modifiers.

Dynasol Elastomers

Paracril™ 3380

Paracril 3380 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Pergan

PEROXAN DC-40 P

PEROXAN DC-40 P is Dicumyl peroxide 40%, Powder with chalk.PEROXAN DC-40 P is used for the curing of unsaturated polyester resins.PEROXAN DC-40 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Rongcheng Chemical General Factory

Rongcheng Chemical General Factory Accelerator NOBS(MOR)

Rongcheng Chemical General Factory Accelerator NOBS(MOR) is a light yellow granular with an excellent delayed accelerator.

JSR Corporation

Techno Polymer JSR HPR840

JSR HPR840 is a grade for silica compound with low energy loss and good processability.

Kolon Industries

SUKOREZ® SU-401

Kolon Industries SUKOREZ® SU-401 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-401 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Dynasol Elastomers

Calprene® 405

Calprene 405 is a 67/33 butadiene/styrene thermoplastic copolymer, polymerized in solution. It has a radial structure.This product is presented in porous crumb form, which gives good oil absorption.

Polyols and Polymers

POLYTONE® AP109

POLYTONE™ AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

Kraton

Kraton™ D4270 J

Kraton D4270 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied from Japan in the physical forms below. Kraton D4270 JSP - supplied as dusted dense pellets Kraton D4270 JS - supplied as dusted crumb Kraton D4270 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Rongcheng Chemical General Factory

Rongcheng Chemical General Factory Accelerator MBT(M)

Rongcheng Chemical General Factory Accelerator MBT(M) has a pale yellow or white granular as a appearance.

Kraton

Kraton™ G1750 M

Kraton G1750 M is a clear, multi-arm polymer based on ethylene/propylene. It is supplied from North America in the physical form identified below. G1750 MO - supplied in a bale Kraton G1750 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Dynasol Elastomers

Calprene® H6120

Calprene H6120 is a 68/32 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance. Calprene H6120 meets the requirements of the USP class VI plastic classification.This product is available in: - Calprene H6120 porous crumbs. - Calprene H6120 P powder form dusted WITH amorphous silica. - Calprene H6120 PH powder form WITHOUT any dusting agent.

Pergan

PEROXAN DC

PEROXAN DC is Dicumyl peroxide 99%, Crystallin.PEROXAN DC is used for the (co)polymerization of styrene. It may also be used as co-agent in the production of flame retardant, expandable polystyrenePEROXAN DC is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

Kolon Industries

SUKOREZ® SU-120

Kolon Industries SUKOREZ® SU-120 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Munzing

AGITAN® P 801

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

COIM Group

Laripur® LPR6518

SERIES 15 AND 18 PLASTICIZED ESTERProducts based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer.

Kraton

Kraton™ D0243 E

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Sanyo Chemical America Incorporated

SANPRENE LQ-258

SANPRENE LQ-258 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Sanyo Chemical America Incorporated

SANPRENE LQ-2300

SANPRENE LQ-2300 is used for the production of microporous layers in wet processes. They are suitable for leather for shoe tops with a rather hard feel. The resulting films exhibit excellent hydrolysis resistance.

Sanyo Chemical America Incorporated

SANPRENE LQ X31A

SANPRENE LQ-X31A is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Sanyo Chemical America Incorporated

SANPRENE LQ-3300

SANPRENE LQ-3300 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Xenia

XECARB® 11-C20-HP

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP