products in Furniture: Lubricant (Internal)

Polyfill Technologies

Polyfill Technologies Antistatic Masterbatch-PT3002

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

MOCOM Compounds

ALPERFORM® PC SL 0229-16

MOCOM Compounds ALPERFORM® PC SL 0229-16 is a polycarbonate base polymer with a dosage of 2.0-3.0% for extrusion and injection molding, depending on the application and operational area. This product contains a lubricant and release agent as a filler/additive system, and has the special feature of slip agent, easy release (demolding), and migration towards the surface. It is intended for use in the automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure market segments for injection molded parts and extruded parts.

MOCOM Compounds

ALPERFORM® POM SL 0268-19

MOCOM Compounds ALPERFORM® POM SL 0268-19 is a Polyoxymethylene Copolymer with a dosage of 1.0-2.0% for extrusion and 1.0-2.0% for injection molding, depending on the application and operational area. It has a natural color, is free from cadmium, lead, and diarylide pigments, is dust-free, and has a high dispersibility and additive content. It is intended for use in the electrical and electronic, furniture, building and construction, and sport and leisure market segments, and can be used for injection molded parts, blow molded parts, and extruded parts. For optimal use, it should be stored in a dry place, protected from light.

Eco USA

Eco USA EMS-3610 Silicone Emulsion

Eco USA EMS-3610 Silicone Emulsions are proudly made in the USA formulated with high viscosity 1000cs polydimethylsiloxane silicone oil.

JLS Chemical

JLS MC25

JLS MC25 is used for PA6/66 application. It is ordinary and big breed in JLS‐MC. It uses PP and other polymer as lubricant and white modifier instead of TiO2 ( 1‐5 phr).

Eco USA

Eco USA EMS-3635 Silicone Emulsion

Eco USA EMS-3635 Silicone Emulsions are proudly made in the USA formulated with 350cs polydimethylsiloxane silicone oil.