products in Housewares: Automotive Applications

ELIX Polymers, S.L.

Elix™ ABS P2MC

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

Grupa Azoty S.A

Tarnoform® 300 GB2

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Nilit

Nilamid® A3 GF30 TF15

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Grupa Azoty S.A

Tarnamid® T- 27 MCS HI

Poliamid 6 impact modified grade. ISO 1874-1: PA 6-HI, MR, 14-020

Chandra Asri Petrochemical

Trilene PP® BI9.0GA

Trilene BI9.0GA is an Impact Copolymer Polypropylene (ICP) for housewares, pail for paint Automotive parts, electric appliance part that requiring good impact strength.This grade use Unipol® polypropylene technology with latest catalyst technology.

ELIX Polymers, S.L.

Elix™ PC/ABS 5120

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Grupa Azoty S.A

Tarnamid® T- 27 MT 20

Tarnamid® T- 27 MT 20 is a 20% mineral filled polyamide 6 compound, heat stabilized.

Grupa Azoty S.A

Tarnamid® T- 27 MS

It is low-medium viscosity general purpose polyamide 6, containing release agent. ISO 1874-1: PA 6, MR, 14-030N

Nilit

Nilamid® B3 W GB30

Nilit NILAMID® B3 W GB30 is a Polyamide 6 (Nylon 6) compound, 30% glass bead reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Grupa Azoty S.A

Tarnoform® 300 GF3

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A

Tarnoform® 300 GF4

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A

Tarnamid® T- 27 MCS V0

It is flame retarded polyamide 6 compound, halogen and phosphorous free, good electrical properties. ISO 1874-1: PA 6, MFR, 14-040

Grupa Azoty S.A

Tarnamid® T- 27 GF25 FRV0

Tarnamid® T- 27 GF25 FRV0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

Nilit

Nilamid® A3 J10 GF13

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit

Nilamid® A3 GB30

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Grupa Azoty S.A

Tarnoform® 400

Easy flowing grade, lowered viscosity ISO 9988-1: POM-K, M-GNR, 04-002

Nilit

Nilamid® A3 W GF55

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Chandra Asri Petrochemical

Trilene PP® BI5.0GA

Trilene BI5.0GA is an Impact Copolymer Polypropylene (ICP) for plastic pallet, pail for paint container, automotive, electrical and general purpose injection molding application requiring good impact strength.This grade uses Unipol® polypropylene technology with latest catalyst technology.

Nilit

Nilamid® A3 H CF20

Nilit NILAMID® A3 H CF20 is a Polyamide 66 (Nylon 66) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

HMC Polymers

Moplen EP380T

Moplen EP380T is a High flow polypropylene impact copolymer resin

Grupa Azoty S.A

Tarnamid® T- 27 MCS

It is low-medium viscosity general purpose polyamide 6, containing release agent and colorant. ISO 1874-1: PA 6, MC2R, 14-030

Nilit

Nilamid® A3 MGF2010

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit

Nilamid® A3 TF20

Nilit NILAMID® A3 TF20 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with 20% PTFE.This compound is intended for injection molding.NILAMID® A3 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit

Nilamid® B3 W M30

Nilit NILAMID® B3 W M30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W M30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Osterman & Company Inc.

Osterlene® HD035-GP

Osterman & Company Inc. Osterlene® HD035-GP is designed for applications requiring excellent stiffness and stress crack resistant properties. It may be used as a sheet extrusion thermoforming resin or a general purpose blow molding resin.Suggested uses would include bottles and containers for bleach and detergents, personal care products and pharmaceutical packaging.HD035-GP meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Nilit

Nilamid® A3 AL40

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

3D Systems

Accura® SL 5530

Grupa Azoty S.A

Tarnamid® T- 27 G

Tarnamid® T-27 G is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, Z

Grupa Azoty S.A

Tarnamid® T- 27 GF25 M

Tarnamid® T-27 GF25M is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-080, GF25Z

Grupa Azoty S.A

Tarnamid® T-27 GF 15

Tarnamid® T-27 GF 15 is a 15% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Grupa Azoty S.A

Tarnamid® T-27 GF25 MT15

Tarnamid® T-27 GF25 MT15 is a 25% glass fibers and 15% mineral filled polyamide 6 compound, heat stabilized.

Nilit

Nilamid® A2 H J10

Nilit NILAMID® A2 H J10 is an unfilled low viscosity Polyamide 66 (Nylon 66) compound, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A2 H J10 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit

Nilamid® A3 J28

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

SCGTPE Industrial

SCGTPE Industrial SA6N-A01

SOULEFLEX® SA6N-A01 is Adhesion Technical Grade - Bonding to ABS, PC and ABS/PC

Grupa Azoty S.A

Tarnamid® T- 27 GF30 TF15

Tarnamid® T-27 GF30TF15 is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, GF30Z15

Nilit

Nilamid® B3 GF50

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.